Mercia Garden Products ESDXL21PT045 User manual

Assembly instruction
Wooden single Log Store
For assistance please contact customer care on: 01636880514
Mercia Garden Products Limited ,
Sutton on Trent,
Newark,
Nottinghamshire,
NG23 6QN
WWW.merciagardenproducts.co.uk
Product code: ESDXL21PT045

1
2
3
4
5
6
50mm
screws
50mm
screws
nails
50mm
screws
50mm
screws
No Components Qty
1
2
3
4
5
6
Floor
Left side panel
Back slats
Roof
Right side panel
Frame
1
1
1
7
1
1
NO Fixing kit Qty
1
2
50mm screws
Nails
12
14
Assembly Instruction
Before assembly.
. We recommended that time is taken to read the instructions before
starting assembly,then follow the easy step by step guide.
. The instruction sheet is only a guide to the assembly .
. Drill all screw locations where indicated.
. This product should be assembled by no less than two people.
. Never attempt to erect the assembly in high winds.
Recommended tools
for assembly:
. Drill with 3mm
diameter drill bit
. Cross head
screw driver
. Hammer
1.Wall panels and inside frame.
Position the left side panel on the floor so that
the frame sit on the floor and the cladding overhang
the floor edge. Secure through the bottom frame of
the side panel into the floor using 2*50mm screws.
Position and attach the right side panel in the same
way. Secure the inside frame through the bottom frame
using 2*50mm screws and the booth ends from the right
and left panel using 2*50mm screws.
2. Back wall.
Secure the seven back slats to the back of
the log store .
Align each slat with the slats on the side panels
and secure in place using 2 nails at each end
of the slat.
3.Roof
Place the roof over the top of the back
and side walls.
Secure through the sides of the roof into
the side panel frame using 4*50mm screws.
NB!
Drill the pilot holes for
the screws
3mm
PZ-2