MGA Entertainment Project MC2 SODA CAN ROBOT User manual

1
535836
Illustrations are for reference only. Styles may vary from actual contents.
CONTENTS
1
4
A. 1 Robot Base
B. 2 Robot Feet
C. 4 Screws
D. 2 Rear Ring Clamps
E. 1 Front Ring Clamp
F. 1 Front Ring Clamp
with Extensions
G. 2 Arms
H. 1 Name Tag
I. 1 Pair of Lips
J. 2 Lanyard Hair Clips
K. 1 Pair of Glasses
L. 1 Mustache
M. 2 Pairs of Eyes Stickers
N. 1 Soda Can Label
O.1 Empty Soda Can
A. B. C.
D.
F.
G.
H. I.
J.
YOUR KITCHEN ITEMS
Please keep this manual as it contains important information.
MGA Entertainment UK Ltd.
50 Presley Way
Crownhill
Milton Keynes, MK8 0ES
Bucks, UK
+ 0800 521 558
(Not Included)
Visit
.com
to register your product
and to enter our sweepstakes
(No purchase necessary)
™
K. L.
M. N.
O.
D.
E.
ADULT SUPERVISION RECOMMENDED
6+ YEARS
Follow us: Watch on:
Download the free app:
Download the
Project Mc2
™app
available on iOS
devices through the
app store.Data
rates may apply.
Kids, ask your parents to download the Project Mc2
™app :
• Click on the App Store icon on your iOS device.
• Click “Search” on your mobile device and type in “Project Mc2
™”
• Once the correct app name comes up on the screen, tap on the word “free.”
• You may be asked for your Apple ID. If so, enter your ID or follow the instructions on screen to get one.
• Once your ID is accepted, watch the download status until the download is complete.
• The application icon should appear on your device. Tap the icon to activate the app.
The Project Mc2
™app requires iOS 6.1 or later. Compatible with iPod Touch 4, iPhone 4 and iPad 2 or later
versions.
iPhone, iPod Touch and iPad are trademarks of Apple Inc., registered in the U.S. and other countries.
‘Let’s care for the environment!’
The wheelie bin symbol indicates that the product must not be disposed of with other household
waste. Please use designated collection points or recycling facilities when disposing of the item.
Do not treat old batteries as household waste. Take them to a designated recycling facility.
www.projectmc2.com
© 2015 MGA Entertainment, Inc.
PROJECT MC2
™is a trademark of MGA
in the U.S. and other countries. All
logos, names, characters, likenesses,
images, slogans, and packaging
appearance are the property of MGA.
16300 Roscoe Blvd.
Van Nuys, CA 91406 U.S.A.
[phone]
Printed in China
0415-1-E/INT

223
QUICK START
•Always turn the robot base “OFF”after playing to conserve battery life.
• DO NOT expose the robot base to moisture of any kind.
• Do not use stickers on humans, pets, furniture or any item which may be damaged by sticker
or sticker removal.
• Stickers may not be removable once applied to the can or can label.
IMPORTANT INFORMATION
• Use alkaline batteries for best performance and longer life.
• Use only the type battery recommended for the unit.
• Batteries should be replaced only by an adult.
• Insert batteries with the correct polarity ( + and – ).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable(nickel-cadmium) batteries.
• Do not short-circuit batteries.
• When not used for an extended time, remove batteries to prevent possible leakage
and damage to the unit.
• Do not mix rechargeable and non-rechargeable batteries.
• Rechargeable batteries are to be removed from the toy before charging.
• Rechargeable batteries are to be recharged only under adult supervision.
• Do not recharge non-rechargeable batteries.
• Exhausted batteries are to be removed from the toy.
• Do not dispose of batteries in fire as they may leak or explode.
SAFE BATTERY USAGE
12
34
1. Snap the two feet onto the robot
base with the points facing inward
as shown.
3. Place one front ring clamp and one
rear ring clamp around the can and
secure with screws. Repeat with
additional ring clamps.
4. Build your robot by attaching parts
to the can rim,adding accessories
to the openings on the clamps and
attaching eye stickers.
2. Peel the sticker label from its backing
and wrap it around the soda can.
5
5. Place the robot into the robot base.
6
6. Move the switch on the back of the
unit to the “ON” position to make
your robot walk!
screw
screw
ON
An adult must install fresh alkaline
batteries (not included) in the robot base
prior to playing. Here’s how:
1. Remove the feet from the robot base.
2. Using a Phillips screwdriver (not
included) remove the screw battery
compartment cover on the bottom of
the base.
3. Install two (2) 1.5V AAA (LR03) alkaline
batteries (not included) making sure
the (+) and (-) ends face the proper
direction as indicated inside the battery
compartment.
4. Replace the compartment cover and
tighten the screw.
BEFORE YOU BEGIN
2 x AAA Batteries
1.5V AAA/LR03
1.5V AAA/LR03