Miboxer Mi-Light FUT089Z User manual

Model No.: FUT089Z
RGB+CCT Remote (Zigbee 3.0)
Subordinate New Brand

This item is made by zigbee 3.0 standard protocol with low
consumption,strong ability to set up internet and anti-interference.
It can control on/off, RGB color,color temperature,saturation and
brightness for zigbee 3.0 lights.One remote device can control
max 25 lights.
1. Features
Zigbee 3.0 standard protocol
Zigbee 3.0
Compatible with all zigbee 3.0 lights
Each zone can keep one favorite color, double click
zone " l" key to get it (Need to add remote into zigbee
gateway and set up by App)
7 Zones can divide lights into different
combinations easily
Dim brightness / saturation
Remote support add to the zigbee 3.0 gateway
Can realize App and remote to control lights
16 Millions of colors to choose
Color temperature adjustable

47mm
153mm
19mm
Zigbee 3.0 Remote
2. Parameters
78mm
24.3mm
53mm
Model No.: FUT089Z
Working Voltage: 3V (AAA * 2PCS)
Transmitting Power: 10dBm
Standby Power Consumption: 20µA
Max Controllable Lights: 25 Pcs
Control Distance: 100m (open area)
Working Temperature: -10~40°C

Color ring
Green
Blue
Red
White model
Saturation/
Color temperature
Pilot lamp
Attention: Please change battery if the indicator flashes frequently
with low percentage.
Master off
Master on
Zigbee 3.0 Remote
“ ” Zone off
(Unlink)
“ ” Zone on
(Link)
Countdown 10 s
to turn off
Countdown 30 s
to turn off
Brightness
3. Function

1. Connect light with power supply.
2. Ensure the light is always on ( please wait 5 seconds to turn off
light and turn on again if the light is in breathe ambience ).
3. Long press " " button in zone 3 seconds untill the pilot lamp
of remote flash slowly.
4. Make the remote with lights closely ( within 1m).
5. Matching is done if the light breathe 3 times.
4. Link and Unlink (not added into gateway)
1. Connect light with power supply.
2. Ensure the light is always on.
3. Long press zone " " button with 3 seconds untill the indicator
of remote flash quickly
4. Make the remote with lights closely ( within 1m).
5. Dismatching is done if the light breathe 3 times.
Instruction of Matching
Instruction of Dismatching
Slide the brightness slider to adjust the brightness.
Touch the color ring to change colors.
Under white light mode, adjust color temperature;
Under color light mode, change color saturation.
ON
OFF
WSwitch to white color model
Master on, turn on all lights which had linked.
Master off, turn off all lights which had linked.

It's flexible to creat different zones. Each zone max connect
with 25 lights. One remote support connection with 25 lights.
One light can be controlled by same remote from different
zones.
5. Zone Control
1 2 3 11 2
Attention
1. Please repeat linking if the device don't link successfully
after indicator flash 20 seconds.
2. Remote only match or dismatch with one light in one time, it will
match or dismatch with the nearest light.
3. Remote not added into gateway: One light is only controlled
by one remote.
4. Remote and light added into same gateway: One light can be
controlled by many remotes.
Remote
The remote doesn't pair
with zigbee gateway
The remote paired with
Zigbee gateway
Support match and dismatch light
Only support match and
dismatch light which
connected with same gateway
Light

1. "MiBoxer Smart" app already added gateway.
2. Click “zigbee gateway" in "Home" interface and enter in.
3. Add subdevice.
Zigbee lights can be controlled by remote, app or third party
voice at the same time
Method:
6. Add remote into zigbee 3.0 gateway

4. Press " " and " " button 5 seconds at the same
time untill indicator of remote flash one time with one
seconds.
5. Click "Indicator is flashing quickly"
Zigbee 3.0 Remote

6. Click "Done" ,remote added into gateway successfully

1. "MiBoxer Smart" app already added zigbee 3.0 gateway and
some lights connected into zigbee gateway ( please read
instruction for zigbee lights and find out solution for
matching and dismatching).
2. Select "Zigbee Remote" and enter in.
3. Select zone which need to match or dismatch (eg:zone-1).
Attention: “ON/OFF” need to match or dismatch manually.
7. Match and dismatch light
(Remote already added into gateway)

4. Click" Device Selection"
5. Click select the controlled
device and "Save"
6.
"Lighting Selection" instruction:
a). Select Color or Scene you
like, click "Save".
b). Double click " " on the
remote to quickly change the
light to the color of your
choice.
7. Set up completed and click
"Save" it

1. Please change battery if the indicator of remote flash
frequently while you are using it. Don't use battery with poor
quality, otherwise the battery is easy to liquid out and broke
remote
2. Please don't use it in moist, high temperature,dusty or high
voltage application since this model is accurate
electronics.We suggest to keep it indoor,dry and none static
electricity area
3. Please stay away from wide metal and high magnetic field,
otherwise it will affect transmitting distance.
Made in China
8. Attention