MICODUS MV790G User manual

MV790G User Manual V1.0
Learn how to set up your new MiCODUS Tracker
Copyright ©2023 MiCODUS | All Rights Reserved
R

2.Specifications
1. Main Features
GPS+LBS
+GLONASS
Historical Route
Playback
9-90V Wide
Working Voltage
Vibration
Alarm
Remotely Cut Off
/Resume Fuel
Realtime
Tracking
Overspeed
Alarm
Engine On/
OFF Alarm
ON / OFF
Tow Alarm Geo-fence SOS
Panic Button
Power
Disconnect Alarm Voice Monitor 4G LTE+
2G GSM
SOS
SOS,Microphone
External lnterface
Model
Weight
Dimensions
Backup Battery Working Time
MV790G
52g
90mm * 40mm * 14mm
1-2 hours
Device Information
Working Voltage
Working Current
Sleep Current
Battery Capacity
Working Temperature
Working Humidity
Working Frequency
SIM Card
Cellular Antenna
Positioning Type
GPS Antenna
Cold Start
Hot Start
Tracking sensitivity
GPS Channels
Position Accuracy
GPS+GLONASS+LBS
Built-in
≤32 Seconds
≤1 Second
-162 dBm
64
5-10m
2G GSM/GPRS: 850/900/1800/1900MHz
Nano SIM Card
Built-in
DC 9-90V
<30 mA
<15 uA
3.7V 80mAh Lion Polymer battery
-20℃ - 70℃
10%-85%RH non-condensing
Working Parameters
Cellular Specifications
GNSS Specifications
4G LTE CAT1: B1/B2/B3/B4/B5/B7/B8/B12/
B13/B18/B19/B20/B25/B26/B28/B66/B34/
B38/B39/B40/B41

3.How to manage the tracker to get online?
Normal SIM
1MB Free
PrepaidData
www.spionlink.com
AddCredit
Data Only
NoSMS & Call
Roaming
Unavailable
TopUp
Step 1
Step 2
Please get a suitable SIM card from your local place. The
SIM card requirements
SIM card must meet below points:
It must be compatible with the 4G LTE or 2G GSM network
Please enable SMS, call, internet data traffic of the SIM card
Remove the PIN code
Enable the caller ID display feature
Use Nano size SIM card for the tracker
Please inquire the SIM card provider for the exact correct APN
information
Wiring
1MB Free
PrepaidData
www.spionlink.com
AddCredit
Data Only
NoSMS & Call
Roaming
Unavailable
TopUp
Charging LED
GSM LED
GPS LED

apn,apn name
apn,apn name,
apnuser,apnpassword
apn ok
apn ok
apn,cnmet
apn,orange,orange,
orange
SMS Command
Format Reply Example Note
If the APN information doesn't have APN user
and APN password then please use this
command
If the APN information has APN user and APN
password then please use this command
Note: Please get the exact correct APN name from local SIM card provider. The APN information
is very important, it must 100% correct to match with the sim card of the tracker, if you
configured wrong APN, the tracker also will reply "SET APN ok" but it will can't get online!
Please get the exact correct APN name from local SIM card provider.Take the tracker to a
good signal place for operation and configure the APN for it as below:
Step 3 Configure APN

4. Package Content
x 1
x 1
x 1
x 1
x 1
x 1
x 1
LED Event State
State
Searching for network
GSM LED (GREEN) Network has been registered Flash every 1 second
Solid
Flash every 1 second
Solid
GPS has fixed
GPS is in fixing
Device is working but stopped more than 5min
Device has not been turn on
Device ran out of battery
GPS LED (Blue)
ALL LED ALL LED TURN OFF
5. Functions Explanation
a. Vibration Alert:
This vibration alert function just work under stationary
status. How to use this function:
Step 2:Enable the device to enter into arm mode by this
sms command: 111
Step 3:Conifgure the alarm ways by this sms command:
vib,2,4
Step 1:Set admin number by this sms command:
admin123456,number with country code
Step 4:Keep the device under stationary status more than 5min to let it enter into sleep arm
mode;
For example:
admin123456,0086134********
admin ok
arm ok
MV790G
111
vibrate sms alarm set ok
vib,2,4
Please follow with the quick user guide carefully!
Step 4 Indicator status description
GPS Main Unit MV790
Function Cable
Microphone Cable(Optional)
SOS Button Cable(Optional)
Relay
User Guide
Genuine Packing Box

Step 1:Set admin number by this sms command:
admin123456,number with country code
Step 3:Send this sms command from the admin number to cut
off fuel:555
* If the network signal and satellite signal both are available, when the equipment speed
exceeds 20km/h, the fuel circuit will not be cut off immediately, it will cut off intermittently
till the speed is below 20km/h, then just can be completely cut off.
* In the tracker has network signal and but no satellite signal, the fuel circuit will be cut
off intermittently, after 2, 3 minutes it will be cut off completely;
* If the tracker stopped more than 5 minutes, the fuel circuit will be cut off immediately,
and then connected, but if you vibrate the tracker or vibrate the tracker the fuel cirsuit will
be cut off immediately;
b. Cut Off Fuel/Resume Fuel
Step 5:Vibrate the device then the tracker will send the vibration alarm messages
For example:
admin123456,0086134********
cutoil123456,1
admin ok
cut oil ok
cut oil ok
MV790G
555
:About the cut off fuel function, firstly please make sure the fuel circuit is
connecting to main power. About the cut off fuel function, firstly please make sure the fuel
circuit is connecting to main power. Secondly, it has 3 different performance, please read it
carefully:
NOTE
:you also can configure more two SOS numbers for the tracker, the
alarm messages also will be sent to them!
NOTE
:you also can configure more two SOS numbers for the tracker, the
alarm messages also will be sent to them!
NOTE
Step 1:Set admin number by this sms command:
admin123456,number with country code
Step 2:Configure the alarm ways via this sms command:
autorep123456,AB
A=0 (Engine ON: No Alarm);
A=1 (Engine ON: SMS only);
A=2 (Engine ON:Platform only);
A=3 (Engine ON: SMS+Platform)
B=0 (Engine OFF: No Alarm);
B=1 (Engine OFF: SMS only);
B=2 (Engine OFF: Platform only);
B=3 (Engine OFF: SMS+Platform)
c. Engine On/Off Alarm
For example:
admin123456,0086134********
admin ok
set ok
MV790G
autorep123546,12
Step 2:Choose the cut off fuel mode you want:
Safely cut off fuel mode: cutoil123456,0
Immediately cut off fuel mode: cutoil123456,1
For safely cut off fuel mode, it has 3 different performance, please read it carefully:
For immediately cut off fuel mode, it will cut off fuel completely under any conditions only if
the device has signal.

Unable to connect to
tracking platform
Check the APN and settings.
Check whrther the data service of SIM card is enabled.
Check the balance of SIM card.
Tracker shows offline
Check whether external power is still connected.
Check if the vehicle entered netword blind area.
Check the balance of SIM card.
7. Troubleshooting
Type Use
Location drift
In area with poor GNSS signal (tall building around or
basement), drifting may happen.
Check whether vibration happens around to trigger the
accelerator.
Unable to locate
Make sure the top side facing upward without metallic things
shielded.
Make sure it’s not in area with no satellite coverage.
No command reply
Make sure command format is correct.
Vehicle may be in network blind area.
Make sure SIM card is well inserted and has SMS servi.
6. Installation Recomendation
1) The decice should face up to the sky.
2) Metal therma barrier of heating layer of the windshield affects the signal.
1
3
4
2
Inside the head light
Under the pedal
Inside the front cover
Inside the taillight
component
or plastic
Under Front Dash
Inside Door Pedal

Functions Command Format Explanation
8. Full SMS Commands List
Parameter Query
param,1
param,2
Status status
firmware version、ID、IP、port、domain、APN
admin number, SOS number,move distance,
overspeed, auto arm time, auto disarm time,
alarm interval
BAT:10 GPRS: GSM: GPS:A/V ACC:on/off
oil:on/off power:on/off
imei123456IMEI Checking
Check Command
Password
Google Maps Link
Set Admin Number admin123456,number
V:A: Indicates the device has GPS signal;
V:V: Indicates the device doesn't have GPS signal;
2019-11-26 10:17:01: Date and Time;
S: 000km/h: Speed of the tracker
Bat:5: Battery level of the backup battery of the
tracker, it has 6 levels: "6" means 100% , "5" 80%,
"4" means 60%, "3" means 40%, "2" means 20%,
"1" means 10%;
ACC: off: The status of the car engine;
7201000006: ID number of the device;
S26: GSM signal is 26 G06: GPS signal is 06
p:46000, l:13152, c:63162: p,l,c this 3 parameters
means the LBS code
getpsd
G123456# or where
Command Password
Change setpwd123456,new password The password just can be 6 digitals
Example: admin123456,008613566669999
Please add your country code as prefix of the admin
number
Set SOS Numbers SOS,SOS1,SOS2
Example: SOS,008613566668888,008613566669999
Please add your country code as prefix of the admin
number
Back to Factory Setting begin123456
After sent this sms command, all your configuration will
be cleared and the device will get back to factory default
settings
After sent this sms command, the configurations will be
saved and the device will restart
Restart rst
A=1 ON ; A=0 OFF; Default: 1
Data Traffic Switch gprs123456,A
Query Commands
Setting Commands

If west time zone, you need input sign "-",
for example: timezone123456,-4; if east time zone, then needn't
input sign "+", for example: timezone123456 8
Example: apn,orange,orange,orange
Please get the exact correct APN name from the SIM card
provider of the tracker!!!For example: apn,orange,orange,orange
Example: apn,internet
If the SIM card operator doesn't have APN user and password,
then you can ignore it!!! For example: apn,cnmet
Example: adminip 123456,47.254.77.28:7700 or adminip
123456,d.micodus.net:7700
Micodus tracking platform: Domain name: d.micodus.net,
IP: 47.254.77.28, Port: 7700
Example: 1. upload123456,10 (Means the device will upload
data every 10s under moving status and heartbeat data every
3min under static status)
2. upload123456,1800 (Means the device will upload data every
1800s under both moving status and static status)
A: Time interval value: 1-3600s; if A is less than 600s, for
example, A=10s, then device will upload data every 10s when
moving, after the car stop more than 5min, it will just upload
hearbeat data every 3min; if A is more than 600s, for example,
A=1800s, then the device will upload data according to 1800s
under both moving and stationary status
APN
IP/Domain&Port
Data Upload Frequency
apn,apn content,apnuser,
apnpasswd
apn,apn content
adminip123456,
ip/domain name:port
upload123456,A
Functions Command Format Explanation
Time Zone timezone123456,A
Arm 111 or SF
Disarm 000 or CF
Cut Off Fuel Mode cutoil123456,A
Example:
If you want to cut off fuel immediately, please send below two
commands:
Firstly send: cutoil123456,1
Secondly send: 555
If you want to cut off fuel safely, please send below two
commands:
Firstly send: cutoil123456,0
Secondly send: 555
A=0-1: 0: Cut off fuel safely; 1: Cut off fuel immediately
Cut Off Fuel 555
Resume Fuel 666 resume oil ok
cut oil ok
Auto Arm By ACC acclt,time
Example: acclt,30 (Means the tracker will enter into arm status
automatically after engine off 30s)
Time scope: 5-1200 seconds

Movement Alarm move,<distance(m)>,
[mode]
Example: move,300,1 (Means if the tracker was moved 300m it
will send alarm message to admin and sos numbers via platform
and sms )
Move distance 100-3000m；
Mode:1-4: 1、Platform+SMS；2、Platform+Call；3、Platform+
SMS+Call；4、Platform only Default: 4
Sleep Mode
sleep123456,time
sleep123456,shock
sleep123456,off
Cancel sleep mode
If device keep stationary more than 5 minutes the device will
enter into sleep mode automatically, sms commands and
call can wake up it
If device keep stationary more than 5 minutes the device will
enter into sleep mode automatically, vibration, sms
commands and call can wake up it
Example: speed,100,1 (Means if the speed of the tracker exceed
100km/h it will send alarm message to admin and sos numbers via
platform and sms )
Speed value: 20-150km/h；Mode: 1-4: 1、Platform+SMS；
2、Platform+Call；3、Platform+SMS+Call；4、Platform only
Default: 4
Overspeed Alarm
speed,
<over speed value>,
[mode]
Functions Command Format Explanation
Vibration Alarm vib,<level>,[mode]
Example: vib,3,3 (Means the sensitivity level of the tracker is 3,
once the vibration alarm was triggered the alarm message will be
sent to admin and sos numbers via platform, sms and call )
Sensitivity Level: 1-9, 1 is the most sensitive；Mode: 1-4：
1、Platform+SMS；2、Platform+Call；3、Platform+SMS+Call；
4、Platform only Default: 4
Tow Alarm tow,<distance(m)>,
[mode]
Example: tow,300,1 (Means under ACC off status, if the tracker
was moved 300m it will send alarm message to admin and sos
numbers via sms)
Tow distance 100-3000m；Mode:0-4：0、Turn Off; 1、SMS；
2、Call；3、SMS+Call；4、Platform Default: 4
Engine On/Off Alarm autorep123456,AB
Example: autorep123456,33 (Means both ACC on and off alarm
already been enabled, the alarm message will be sent to admin and
sos numbers via platform and sms)
A=0 (Engine ON: No Alarm); A=1 (Engine ON: SMS only);
A=2 (Engine ON:Platform only); A=3 (Engine ON: SMS+Platform)
B=0 (Engine OFF: No Alarm); B=1 (Engine OFF: SMS only);
B=2 (Engine OFF: Platform only);B=3 (Engine OFF: SMS+Platform)
Car Battery Low
Voltage Alarm
lowalarm,<voltage>,
[mode]
Example: lowalarm,12,1 (Means if the external voltage is less than
12v, the alarm message will be sent to admin and sos numbers via
platform and sms)
Voltage scope 5-100V；Mode:1-4: 1、Platform+SMS；
2、Platform+Call；3、Platform+SMS+Call；4、Platform only
Default: 4
Power Off Alarm pwr,A
Example: pwr,1 (Means when power off the alarm message will be
sent to admin and sos numbers via platform and sms)
A: Alarm ways 0-4: 0、Off ; 1、Platform+SMS；2、Platform+Call；
3、Platform+SMS+Call；4、Platform only Default: 4
Alarm Setting Commands

E-mail: [email protected]
Skype: MiCODUS
9. Any Questions?
10. Download the APP
Download on the
APP Store
Download for
Android
Search "MiCODUS" in iOS APP store or Google Play
Store, or just scan the QR code as below to download
MiCODUS APP: