Microdia FlashMover 8-in-1 USB User manual

FlashMover®8-in-1 Card Reader Installation
Guide
Congratulations on purchasing the FlashMover 8-in-1 USB Card Reader!
The FlashMover 8-in-1 Card Reader works with USB enabled Microsoft Windows 98,
ME, 2000, XP, and Mac 8.6/9/X and higher systems. This Installation Guide contains
all the information you need to install your FlashMover 8-in-1 Card Reader.

A. Windows Users
To install the FlashMover 8-in-1 Card Reader on Windows 98/98SE/2000:
1. Do not Plug the card reader to the PC’s USB port before the installation complete.
2. Insert the Driver CD-ROM in the CD-ROM drive.
3. The CD-ROM will auto-run and pop up a Driver Installation Manual Window.
4. In the Driver Installation Manual, select “USB 1.1 8-in-1 card reader”.
5. The driver installation program will run.
6. Follow installation instruction accordingly to complete the driver installation.
7. Reboot your computer.
8. Plug the card reader into your computer USB port.
9. Four new removable drives is added to you computer, each drive has an icon
indicate that which one for which type of flash memory card.
10. The card reader can now be used as any other drive on your computer.
11. Insert flash memory cards, now you can access files in your cards.
* Please check our website www.microdia.com to download the latest driver.
To install the FlashMover 8-in-1 Card Reader on Windows Me/XP:
1. Plug the card reader into your computer USB port.
2. It is fully Plug & Play in Windows Me/XP, no driver installation needed.
3. Four new removable drives is added to you computer, the first one is for
SmartMedia, second one is for CompactFlash, third one is for SD/MMC and the last
one is for Memory Stick.
4. The card reader can now be used as any other drive on your computer.
5. Insert flash memory cards, now you can access files in your cards.

B. Macintosh Users
To install the FlashMover 8-in-1 Card Reader on Mac OS 8.6 and OS 9
1. Insert the Driver CD-ROM in the CD-ROM drive.
2. Double click the CD-ROM icon and choose “USB 1.1 8-in-1 card reader”.
3. Double click “Install” and follow installation accordingly to completion.
4. Reboot your computer.
5. Plug the card reader with cards inserted into your computer USB port.
6. Four new disks are added to you computer. The card reader can now be used as
any other disks on your computer.
* Please check our website www.microdia.com to download the latest driver.
To install the FlashMover 8-in-1 Card Reader on OS X
Note: Please go to Mac website to update the Mac OS to the latest version.
1. Plug the card reader with cards inserted into your computer USB port.
2. It is fully Plug & Play in Mac OS X, no driver installation needed.
3. Four new removable disks are added to you computer. The card reader can now
be used as any other disks on your computer.

C. Removing your flash memory card from the FlashMover 8-in-1 Card
Reader
To remove the flash memory card on Windows system
1. Close any files that are opened and reside on the flash memory cards.
2. Wait until the green LED Activity light stops flashing, now you can remove your
cards safely.
To remove the flash memory card on Mac system
1. The flash memory card must be “ejected” or “un-mounted” by dragging the card’s
disk icon into the trash.
Caution: Failure to properly “eject’ the card before removing the card from the card
reader could cause data loss or corruption.
** Most problems or technical issues can be resolved by simply visiting our Support
& Services section inside our website, www.microdia.com or send us an email to
[email protected].