Microdia FlashMover 3-in-1 CF/SM User manual

FlashMover 3-in-1 CF/SM Card Reader
Installation Guide
Congratulations on purchasing the FlashMover 3-in-1 CF/SM USB Card Reader!
The FlashMover 3-in-1 CF/SM Card Reader works with USB enabled Microsoft
Windows 98, ME, 2000, XP, and Mac 8.6/9/X and higher systems. This Installation
Guide contains all the information you need to install your FlashMover 3-in-1 CF/SM
Card Reader.

A. Windows Users
To install the FlashMover 3-in-1 CF/SM Card Reader on Windows 98/98SE/2000:
1. Do not Plug the card reader to the PC’s USB port before the installation is
completed.
2. Insert the Driver CD-ROM in the CD-ROM drive.
3. The CD-ROM will auto-run and pop up a Driver Installation Manual Window.
4. In the Driver Installation Manual, select “Compact Flash + Smart Media”.
5. The driver installation program will run.
6. Follow installation instructions accordingly to complete the driver installation.
7. Reboot your computer.
8. Plug the card reader into your computer USB port.
9. Two new removable drives are added to you computer, the first one is for
CompactFlash, the second one is for SmartMedia. The card reader can now be used
as any other drive on your computer.
10. Insert flash memory cards, then you can access files in your cards.
* Please check our website www.microdia.com to download the latest driver.
To install the FlashMover 3-in-1 CF/SM Card Reader on Windows Me/XP:
1. Plug the card reader into your computer USB port.
2. It is fully Plug & Play in Windows Me/XP, no driver installation needed.
3. Two new removable drives are added to you computer, the first one is for
CompactFlash, the second one is for SmartMedia. The card reader can now be used
as any other drive on your computer.
4. Insert flash memory cards, then you can access files in your cards.

B. Macintosh Users
To install the FlashMover 3-in-1 CF/SM Card Reader on Mac OS 8.6 and OS 9
1. Insert the Driver CD-ROM in the CD-ROM drive.
2. Double click the CD-ROM icon and choose “Compact Flash + Smart Media”.
3. Double click “USB Card Reader” and follow installation accordingly to completion.
4. Reboot your computer.
5. Plug the card reader into your computer USB port.
6. Two new disks are added to you computer, the first one is for CompactFlash, the
second one is for SmartMedia. The card reader can now be used as any other disk on
your computer.
7. Insert flash memory cards, then you can access files in your cards.
* Please check our website www.microdia.com to download the latest driver.
To install the FlashMover 3-in-1 CF/SM Card Reader on OS X
Note: Please go to Mac website to update the Mac OS to the latest version.
1. Plug the card reader into your computer USB port.
2. It is fully Plug & Play in Mac OS X, no driver installation needed.
3. Two new disks are added to you computer, the first one is for CompactFlash, the
second one is for SmartMedia. The card reader can now be used as any other disk on
your computer.
4. Insert flash memory card, then you can access files in your card.

C. Removing your flash memory card from the iFlash 3-in-1 CF/SM Combo
Card Reader
To remove the flash memory card on Windows system
1. Close any files that are opened and reside on the flash memory cards.
2. Wait until the green LED Activity light stops flashing, then you can remove your
card safely.
To remove the flash memory card on Mac system
1. The flash memory card must be “ejected” or “un-mounted” by dragging the card’s
disk icon into the trash.
Caution: Failure to properly “eject’ the card before removing the card from the card
reader could cause data loss or corruption.
** Most problems or technical issues can be resolved by simply visiting our Support
& Services section inside our website, www.microdia.com or send us an email to
[email protected].