Microdia FlashMover 23-in-1 USB 2.0 User manual

23-in-1 USB2.0 CARD READER
INSTALLATION GUIDE &
OPERATION MANUAL

INSTALLATION GUIDE
Thank you for purchasing MICRODIA FlashMover®23-in-1 USB
2.0 Reader. This FlashMover®23-in-1 USB2.0 Card Reader
works with USB enabled Microsoft Windows 98, 98SE, ME,
2000, XP or above and Mac OS 9/X and higher systems. This
installation guide contains all the information you need to
install your FlashMover®23-in-1 USB2.0 Card Reader.
For Windows Users
To install the FlashMover®23-in-1 USB2.0 Card Reader on Windows 98/98SE/2000:
1. Do not plug the card reader into the PC USB port before the installation is completed.
2. Download the driver from www.microdia.com or insert the Driver CD in the CD-ROM drive.
3. Double click the [Autorun.exe] after downloading or the CD-ROM will auto-run and follow [Install Wizard] installation
instruction.
4. After installation, reboot your computer.
5. Plug in your card reader into the USB port.
6. There are 4 new removable drives added to your computer.
7. Insert flash memory cards to access files in your cards.
NOTE: Please check MICRODIA®website, www.microdia.com, for downloading the latest driver.
To install the FlashMover®23-in-1 USB2.0 Card Reader on Windows ME/XP:
1. Plug the card reader into your computer USB port.
2. It is fully Plug-&-Play for Windows ME/XP, no driver installation needed.
3. 4 new removable drives are added to your computer after plug in the card reader.
4. Insert flash memory cards to access files in your cards.
For Macintosh Users
To install the FlashMover®23-in-1 USB2.0 Card Reader on Mac OS 9.X
1. Do not plug the card reader into the USB port before the installation is completed.
2. Download the driver from www.microdia.com or insert the Driver CD in the CD-ROM drive.
3. Double click [Installer] and follow the [Install Wizard] installation instruction.
4. After installation, plug in your card reader into the USB port.
5. There are 4 new removable drives added to your computer.
6. Insert flash memory cards to access files in your cards.
NOTE:
- Please check MICRODIA®website, www.microdia.com, for downloading the latest driver.
- Please go to Mac website to update the latest version of Mac OS.
To install the FlashMover®23-in-1 USB2.0 Card Reader on Mac OS 10.X and above
1. Please go to Mac OS website for upgrading to Mac OS X 10.1.2, then OS X will automatically detects the card reader.
Removing your flash memory cards from the FlashMover®23-in-1 USB2.0 Card Reader
To remove the flash memory cards on Windows system
1. Close any files that are opened and reside on the flash memory cards.
2. You can remove your cards safely after the LED stop blinking
To remove the flash memory card on Mac system
1. The flash memory cards must be [EJECTED] or [UN-MOUNTED] by dragging the card’s disk icon in the trash.
CAUTION: Failure to properly [EJECT] the card before removing the card from the card reader could case data
loss or corruption.

OPERATION MANUAL
This operation manual contains all the information you need to
operate your FlashMover®23-in-1 USB2.0 Card Reader.
USING 23-in-1 FlashMover®CARD READER
1. Connect 23-in-1 FlashMover Card Reader to the
Computer by USB miniB cable 2. Open My Computer - 4 Removable Disks will be
added. It is now ready for reading/writing
23-in-1 FlashMover®CARD READER FOR xD-Picture / SMART MEDIA CARD
xD-Picture Card
Front View xD-Picture Pin Upward Smart Media Pin
1. After connecting the Card Reader to the computer,
you may insert the xD-Picture / Smart Media Card 2. Turn the xD-Picture / Smart Media Card upside down (e.g. with the pins of the xD-Picture / Smart
Media Card facing upward)
3. Insert the xD-Picture Card into the upper SMC slot
with the card against the left hand side of the slot.
For the Smart Media Card, please insert the card
into the lower SMC slot with pin facing upward.
NOTE: Each time you only can insert one card.
4. If the xD-Picture / Smart Media Card is inserted
correctly, 3 LED lights on the Card Reader will turn
on. If not, please remove the xD-Picture Card and
repeat Steps 2 and 3.
5. Open My Computer and double click one of the
Removable Disks such as Removable Disk (F:).
NOTE: The Removable Disk Drive may not be (F:). It is
depended on your computer settings.
6. Removable Disk (F:) will be opened and it is ready
to read/write to the xD-Picture / Smart Media
Card. Ensure all operations are completed before
removing the card.

23-in-1 FlashMover®CARD READER FOR Compact FlashTM I/II/MD CARD
Compact FlashTM I / IICard
1. After connecting the Card Reader to the computer,
you may insert Flash Memory Card 2. 23-in-1 FlashMover Card Reader is compatible to
Compact FlashTM I / II and MD Cards
3. Insert the Compact FlashTM I / II / MD Card into
the CFI/II/MD slot.
NOTE: Arrow sign on the card must be facing to the
card reader.
4. If the Compact FlashTM I / II / MD Card is inserted
correctly, 3 LED lights on the Card Reader will turn
on. If not, please remove the Compact FlashTM I /
II / MD Card and repeat Steps 3.
5. Open My Computer and double click one of the
Removable Disks such as Removable Disk (E:).
NOTE: The Removable Disk Drive may not be (E:). It is
depended on your computer settings.
6. Removable Disk (E:) will be opened and it is ready
to read/write to the Compact FlashTM I / II / MD
Card. Ensure all operations are completed before
removing the card.

23-in-1 FlashMover®CARD READER FOR SDTM / miniSDTM / MMCTM / MMCplusTM CARD
SDTM, MMCplusTM, MMCTM, miniSDTM, RS-MMCTM & MMCmobileTM
1. After connecting the Card Reader to the computer,
you may insert the Flash Memory Card 2. 23-in-1 FlashMover Card Reader is compatible to SDTM, MMCTM, MMCplusTM, miniSDTM, microSDTM*,
RS-MMCTM* & MMCmobileTM*, MMCmicroTM*, etc.
* Adapter needed
3. Insert the SDTM / MMCTM / MMCplusTM Card into the
upper SD / MMC / miniSD / RSMMC slot. For
miniSDTM, please insert the card into the lower SD
/ MMC / miniSD / RSMMC slot.
NOTE: Arrow sign on the card must be facing to the card
reader.
4. If the SDTM / MMCTM / MMCplusTM / miniSDTM Card is
inserted correctly, 3 LED lights on the Card Reader
will turn on. If not, please remove the SDTM /
MMCTM / MMCplusTM / miniSDTM Card and repeat
Steps 3.
5. Open My Computer and double click one of the
Removable Disks such as Removable Disk (G:).
NOTE: The Removable Disk Drive may not be (G:). It is
depended on your computer settings.
6. Removable Disk (G:) will be opened and it is ready
to read/write to the Compact FlashTM I / II / MD
Card. Ensure all operations are completed before
removing the card.

23-in-1 FlashMover®CARD READER FOR MS / MS DUO / MS PRO / MS MG CARD
1. After connecting the Card Reader to the computer,
you may insert the Flash Memory Card 2. 23-in-1 FlashMover Card Reader is compatible to
MS, MS PRO, MS DUO, MS PRO DUO, MS MG, etc.
3. Insert the MS/MS PRO Card into the upper MS/MS
DUO/MS PRO/MS MG slot. For MS DUO/MS PRO
DUO, please insert the card into the lower MS/MS
DUO/MS PRO/MS MG slot.
NOTE: Arrow sign on the card must be facing to the card
reader.
4. If the MS/MS PRO/MS DUO/MS MG Card is
inserted correctly, 3 LED lights on the Card Reader
will turn on. If not, please remove the MS/MS
PRO/MS DUO/MS MG Card and repeat Steps 3.
5. Open My Computer and double click one of the
Removable Disks such as Removable Disk (M:).
NOTE: The Removable Disk Drive may not be (M:). It is
depended on your computer settings.
6. Removable Disk (M:) will be opened and it is ready
to read/write to the MS/MS PRO/MS DUO/MS MG
Card. Ensure all operations are completed before
removing the card.

CAUTION!
1. Backup your data before formatting the card as data will be lost.
2. Wait for all operations to be completed before removing the card.
3. The card is designed to fit easily into the system one way only. Do not bend the card or force it into the
slot.
4. Do not touch the connections with your fingers or metal objects.
5. Do not bend or flex the card reader.
(All instructions and handling information should be used in conjunction with the owner’s manuals of your
devices and computer systems.)
** USER ALERT! **
By default, Windows XP or above will format any cards having a capacity greater than 32MB with FAT32 file
system. As most digital cameras can only operate with FAT file system, please select FAT as the file system
when you reformat the card.
MICRODIA (USA)
Camden Ave., San Jose, CA 95120, USA
MICRODIA (UK)
Brickhill Drive, Manton Height, Bedford,
MK41 7QH, England
MICRODIA (HONG KONG)
International Sales Office
1371, HITEC, Trademart Drive, Kowloon Bay, Hong Kong
Tel: [phone] Fax: [phone]
Web: http://www.microdia.com Email: [email protected]