Microlab B51 User manual

www.microlab.cn
Microlab Electronics Co., Ltd
Made in China B51
80-B51-97-0001-01 2012-05-02

80-B51-97-0001-01 2012-05-02

Evolving needs require evolving designs, the B51 is designed specifically for
people on the move. It is compact and in stereo, based on the soundbar design
but made slender for notebooks and tablets. Quality sound with fine tones and
full range resolution.
Comes with a unique clamp mount, which graps onto your LCD screen edge
firmly.
Connects easily to any stereo audio source with 3.5 mm plug.
USB powered, no battery required. Connect to any USB port for its power.
 Slender and sleek design, unintrusive concept
 Stereo speaker for notebook, and tablet
 1.5" speaker drivers designed for full range resolution
 Magnetically shielded for interference free positioning
 Top panel controls for easy access; power on, LED and volume dial
 Simple mounting clamp without additional hardware or sticky pad
 B51 speaker
 Instruction manual
80-B51-97-0001-01 2012-05-02

VO L
Power LED Power switch Volume Dial
Mounting clamp
Clamp to
LCD
frame edge
1. Mount the speaker to your LCD screen frame edge. Do this by
pressing the clamp to release the jaw and insert to sit firmly.
2. Release the clamp and it should sit firmly on the LCD.
3. Connect the USB type A plug to the notebook or USB Hub.
4. Connect the 3.5 mm stereo audio plug to the audio input jack of
the notebook or tablet.
1. Ensure the master volume is at the lowest setting.
2. Turn on the main notebook power or switch on the USB port.
3. Start the playback device and song.
4. Slowly adjust the volume to your preferred volume level and enjoy.
4 Watt RMS
80 Hz - 18 kHz
< 5% 1 W 1 kHz
> 65 dB
1.5 x 2
3 Watt x 2 4 Ohm
NIL
3.5 mm stereo
500mA
Amplifier
Output power:
Power distribution:
Harmonic distortion:
Signal/Noise ratio:
Speakers
Speaker driver:
Speaker rated power:
Interfaces
Output:
Input:
Power
USB:
80-B51-97-0001-01 2012-05-02