Microlab M-700 User manual

Before using, please read the manual carefully
M-700
User Manual
Microlab Technology Co.,Ltd
Made in China
All symbols and logo belong to the respective brand holder or registered holder. All specifications and information are subject to changes without
further notice. Slight variations and differences might appear between the printed photos and actual product due to product enhancement.
M u l t i m e d i a S p e a k e r S y s t e m
80-M700-97-0001-01 2010-05-04

1
Important Safety Instructions
WARNINGS:
1. Read Instructions - All the safety and operating instructions must be read before the product is operated.
2. Retain Instructions - The safety and operating instructions should be kept product for future reference.
3. Heed warnings - All warnings on the product and in the operating instructions should be adhered to.
4. Follow instructions - All operating and use instructions should be followed.
5. Installation - Install in accordance with the manufacturer's instructions.
6. Power sources - This product should be operated only from the type of power source indicated by the marking adjacent to
the power cord entry. If you are not sure of the type of power supply to your home, consult your product dealer or local
power company.
7. Grounding or polarization - the product is not required to be grounded. Ensure the plug is fully inserted into the wall outlet
or extension cord receptacle to prevent blade or pin exposure. Some versions of the product are equipped with a power
cord fitted with a polarized alternating line plug (a plug having one blade wide than the other). This plug will fit onto the
power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug. When using an extension power-supply cord or a power-supply cord other than that
supplied with the appliance ,it should be fitted with the appropriate molded plugs and carry safety approval appropriate to
the country of use.
8. Power cord protection - Power-supply cords should be routed so that they are not likely to be walked on, kinked or
pinched by items placed on or against them, paying particular attention to cords from plugs, receptacles and the point
where they exit from the appliance.
9. Overloading - Do not overload wall outlets, extension cords or multiple sockets, as this can result in a risk of fire or
electric shock.
10. Ventilation - The product must be properly ventilated. Do not place the product on a bed, sofa, or other similar surface.
Do not cover the product with any items such as tablecloths, newspapers, etc.
11. Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products) including amplifiers that produce heat. No naked flame sources, such as lighted candles, should be placed on
the apparatus.
12. Water and moisture - To reduce the risk of fire or electric shock, do not expose the product to train, dripping, splashing or
excessive moisture such as in a sauna or bathroom. Do not use this product near water for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool and the like.
13. Object and Liquid Entry - Never push objects of any kind into this product through openings, as they may touch
dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquid of any kind on
the product. Do not place any object containing liquid on top of the product.
14. Cleaning - Unplug the product from the wall outlet before cleaning. The cabinet of the subwoofer may be cleaned by
dusting with a dry cloth. If you wish to use an aerosol cleaning spray, do not spray directly on the cabinet; spray onto the
cloth. Be careful not to damage the drive units.
15. Attachments - Do not use attachments not recommended by the product manufactures, as they may cause hazards.
16. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall, causing
serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket or table
recommended by the manufacturer or sold with the product. Any mounting of the product should follow the manufacturer's
instructions and should use a mounting accessory recommended by the manufacturer.
17. Moving the product - A product and cart combination should be moved with care. Quick stops, excessive force and
uneven surfaces may cause the product and cart combination to overturn.
18. Unused periods - The power cord of the appliance should be unplugged from the outlet during lightning storms or when
the apparatus is left unused for a long period of time.
Caution:
To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture. No
user-serviceable parts inside. Refer servicing to qualified personnel only.
The lightning flash within an equilateral triangle is intended to alert you to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of sufficient magnitude to constitute an electric shock to a person or persons.
The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the product.
Explanation of Graphical Symbols:
2
19. Servicing - Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
20. Please remove the power plug form the main power source or wall power source when not in use. When plugged in to a
power source, the system is in standby mode, so the power is not entirely cut off.
21. Replacement parts - When replacement parts are required, ensure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock or other hazards.
22. Mains fuses - For continued protection against fire hazard, use fuses only of the correct type and rating. The correct fuse
specification for each voltage range is marked on the product.
23. Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If you do, the speaker
may be damaged when a peak level section is suddenly played.
24. The only means of completely disconnecting the product from the power supply is by removing the power cord from the
wall outlet or the product. The wall outlet or the power cord entry to the product must remain freely accessible at all times
while the product is in use.
25. Try to install the product near a wall socket or extension cord and shall be easily accessible.
26. The highest environmental temperature suitable for this product is 40°C.
Introduction
Features
Quality 2.1 subwoofer system layout for full range audio production.

Ideal for digital multimedia movies, TV, CD/DVD and Mp3/Mp4 playbacks

Microlab M series, your ultimate introduction to serious music entertainment

and multimedia applications
Crystal clear satellites for dynamic audio movements with reflex function for

efficient speaker design
Deep bass with quality woofer driver and bass reflex tunnel.

Package contents
M-700 subwoofer 1pcs
M-700 satellites 2pc
3.5mm stereo - 2RCA cable pc
User manual
1
1pc
Clear sound and hi-fi 2.1 subwoofer system designed for multimedia and computer
applications.
Incorporating Microlab's unique bass technology for deeper depth and high
resolution. Bass reflex tunnel for efficient speaker driver performances.
This 2.1 subwoofer system perfectly match your Mp3/Mp4 player, CD/DVD player
and TV/LCD system.
80-M700-97-0001-01 2010-05-04

Illustrations
34
Illustrations
R
R
L
L
ON
OFF
AC IN
AUDIO OUTPUT
AUDIO INPUT
Rear Panel
Power switch On / Off
AC power cable
+
-
BASS
Bass volume knob
- adjust bass level
Audio input
- connect from
playback source
such as Mp3/Mp4
CD/DVD players
Audio output
- connects to both
satellite speakers
Front Panel
+
-
Volume knob
Power LED
Bass reflex tunnel
- increase bass driver efficiency
and powerful bass effect.
Do not block this port.
Left side: Subwoofer
Volume
knob
Not to scale
Left
Satellite Right
Satellite
Amplifier
Media player
Viewing screen
Subwoofer
2.1 subwoofer arrangement
Ideal listening position and placement
80-M700-97-0001-01 2010-05-04

R
R
L
L
ON
OFF
AC IN
AUDIO OUTPUT
AUDIO INPUT
+
-
BAS S
Technical Information
Product connection and operation
65
Frequently Asked Questions (FAQ)
If the problem still exists, please contact the distributor or seek professional advice.
Check if the audio source is working well
Check if the audio and speaker cables well connected
Check if the volume at right level
Static sound heard when
volume knob is turned
What are the products
supported?
Where to place this speaker
Check if the source file is not corrupted, play a different
song and test.
C
ensure source connection is correctly inserted
heck if the satellite cable well connected, and
One or more satellite no sound
No Sound
Sound is distorted
Turn off the playback source first, then turn the speaker
volume knob several times. Playback again and
monitor. The static noise is due to dust, so simply
turning the volume will remove it easily.
It is magnetically shielded so can be placed near LCD
TV monitor without any distortion
Any playback devices such as PC, notebook, CD/DVD
player, Media Players with 3.5mm to 2RCA connection.
Solutions
SPECIFICATIONS
AMPLIFIER
Output power: 40 Watt RMS
Power distribution: 12 Watt x 2 + 16 Watt
Harmonic distortion: < 0.3% 1W 1kHz
Frequency response: 35Hz - 20kHz
Signal/Noise ratio: > 75dB
Separation: > 45dB
SPEAKERS
Tweeter driver type: 2.5" x 2
Tweeter rated power: 10 Watt x 2, 6 ohm
Bass driver type: 5"
Bass rated power: 15 Watt, 4 ohm
INTERFACES
Output: 2RCA jacks
Input: 2RCA jacks
POWER
Power supply: AC 220V - 240V, 50Hz 140mA
Dimensions
Subwoofer: 165 x 240 x 290mm
Satellites: 90 x 180 x 75mm
Product Net weight: 4.1kg
Connections
1. Connect the satellites to the left and right RCA interfaces.
2. Place both satellites on extreme sides of the listening position.
3. Connect the playback device to the rear input interfaces of the subwoofer with the
included cable.
4. A 2RCA jacks are available at the rear panel of the subwoofer.
5. Last, connect the power cable at the rear of the subwoofer to the AC power supply
source. Please ensure the AC power supply match the power requirement printed at
the rear panel.
Operations
1. Ensure the master volume is at the lowest setting.
2. Turn on the main AC power and switch on the speaker system from the rear power
switch.
3. Start the playback device and song
4. Slowly adjust the volume to your preferred volume level and enjoy.
5. Next adjust the bass volume at the rear panel to your preferred bass effect.
Note: it is advisable not to turn the volume too loud or to its extreme volume limit to avoid
damage to the speaker driver material. Always adjust in slow increment.
Subwoofer
rear panel
Right satellite Left satellite
To AC power supply: 220V - 240V 50Hz 140mA,
or 120V 60Hz 400mA depending on country type
PC
Mp3 \ Mp4
Media pla yer
CD\ VCD \ DVD
Audio sources
80-M700-97-0001-01 2010-05-04