Microlab M-900 User manual

Prior to initial use, please read the manual carefully
MULTIMEDIA SPEAKER SYSTEM
All other brand and product names are trademarks of their respective holders. Actual contents may differ slightly from those shown in print. All
specifications and designs are subjected to changes without any prior notice.
www.microlab.cn
Microlab Electronics Company Ltd.
Made in China
User Manual
M-900
80-M900(11)-97-0001-01 2011-12-01

WARNINGS:
1. Read Instructions - All the safety and operating instructions must be read before the product is operated.
2. Retain Instructions - The safety and operating instructions should be kept with the product for future
reference.
3. Heed warnings - All warnings on the product and in the operating instructions should be adhered to.
4. Follow instructions - All operating and users instructions should be followed.
5. Installation - Install in accordance with the manufacturer's instructions.
6. Power sources - This product should be operated only from the type of power source indicated by the marking
adjacent to the power cord entry. If you are not sure of the type of power supply to your home, consult your
product dealer or local power company.
7. Grounding or polarization - the product is not required to be grounded. Ensure the plug is fully inserted
into the wall outlet or extension cord receptacle to prevent blade or pin exposure. Some versions of
the product are equipped with a power cord fitted with a polarized alternating line plug (a plug having
one blade wide than the other). This plug will fit onto the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug. When using an extension power-supply cord or a power-supply cord
other than that supplied with the product, it should be fitted with the appropriate molded plugs and carry
safety approval appropriate to the country of use.
8. Power cord protection - Power-supply cords should be routed so that they are not likely to be walked on,
kinked or pinched by items placed on or against them, paying particular attention to cords from plugs,
receptacles and the point where they exit from the appliance.
9. Overloading - Do not overload wall outlets, extension cords or multiple sockets, as this can result in a risk of
fire or electric shock.
10. Ventilation - The product must be properly ventilated. Do not place the product on a bed, sofa, or other similar
surface. Do not cover the product with any items such as tablecloths, newspapers, etc.
11. Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or
other products including amplifiers that produce heat. No naked flame sources, such as lighted candles,
should be placed on the apparatus.
12. Water and moisture - To reduce the risk of fire or electric shock, do not expose the product to train, dripping,
splashing or excessive moisture such as in a sauna or bathroom. Do not use this product near water, for
example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, or
etc.
13. Object and Liquid Entry - Never push objects of any kind into this product through openings, as they may
touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill
liquid of any kind on the product. Do not place any object containing liquid on top of the product.
14. Cleaning - Unplug the product from the wall outlet before cleaning. The cabinet of the subwoofer may be
cleaned by dusting with a dry cloth. If you wish to use an aerosol cleaning spray, do not spray directly on the
cabinet; spray onto the cloth. Be careful not to damage the drive units.
15. Attachments - Do not use attachments not recommended by the product manufacturers, as they may cause
hazards.
16. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may
fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand,
Caution:
ExplanationofGraphicalSymbols:
To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture. No
user-serviceable parts inside. Refer servicing to qualified personnel only.
The lightning flash within an equilateral triangle is intended to alert you to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of sufficient magnitude to constitute an electric shock to a person or persons.
The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the product.
80-M900(11)-97-0001-01 2011-12-01

tripod, bracket or table recommended by the manufacturer or sold with the product. Any mounting of
the product should follow the manufacturers’ instructions and should use a mounting accessory
recommended by the manufacturer.
17. Moving the product - A product and cart combination should be moved with care. Quick stops,
excessive force and uneven surfaces may cause the product and cart combination to overturn.
18. Un-use periods - The power cord of the device should be unplugged from the outlet during lightning
storms or when the apparatus is left unused for a long period of time.
19. Servicing - Do not attempt to service this product yourself, as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20. Please remove the power plug form the main power source or wall power source when not in use.
When plugged in to a power source, the system is in standby mode, so the power is not entirely cut off.
21. Replacement parts - When replacement parts are required, ensure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
22. Mains fuses - For continued protection against fire hazard, use fuses only of the correct type and
rating. The correct fuse specification for each voltage range is marked on the product.
23. Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If
you do, the speaker may be damaged when a peak level section is suddenly played.
24. The only means of completely disconnecting the product from the power supply is by removing the
power cord from the wall outlet or the product. The wall outlet or the power cord entry to the product
must remain freely accessible at all times while the product is in use.
25. Try to install the product near a wall socket or extension cord and shall be easily accessible.
26. The highest environmental temperature suitable for this product is 40°C.
Aesthetic and yet powerful, this excellent 2.1 speaker system fits perfectly in any environment for
music entertainment. Equally suitable for media player, and PC/ Notebook application.
All cabinets made from quality wood material for warm sound and good sound characteristics.
Beautiful finishes making it extremely presentable in your living or study rooms. Ideal for multimedia
applications, connect easily to most media player, such as Mp3/Mp4, CD/DVD player, TV or PC.
Listen to your favourite Mp3 songs with this system in uncoloured audio and deep vocals.
Quality satellites with 3 inch driver and powerful bass with 6.5" woofer driver
System utilizing bass reflex technology for deeper bass and depth in resolutions. Front panel with
master volume, treble and bass level controls.
Powerful amplified 2.1 speaker system
System with total power of 45 Watt RMS
All wooden cabinets for natural sound production
Ideal for gaming, music and PC applications with easy 3.5 mm stereo input connection
Full audio spectrum performances, ideal for your favourite entertainment from Mp3, Mp4, CD/DVD
movies and digital playback
Clear highs with double 3", and double 1" tweeters
Deep bass with 6.5" woofer driver
Bass reflex tunnel for deep bass and vocals
Front panel controls for quick and easy access
Features












Packagecontents
M-900(11) subwoofer 1 pc
M-900(11) satellites 2 pcs
3.5 mm stereo - 3.5mm stereo 1 pc
User manual 1 pc

Left satellite Subwoofer Right satellite
Right satellite
Left satellite
3.5 mm stereo input
Front panel,Subwoofer Rear View, Subwoofer
Master volume
knob
Mute button / LED
Bass button + / -
Treble button + / -
Audio input: from 3.5
mm stereo source
Audio output: connect
to satellites
Power switch:
activate system
power
AC power cord
junction
R L
ON
OFF
AC IN
MODEL:M-900
MADEIN CHI NA
MULTIMEDIASPEAKER
AUDIO IN PUT
AUDIO OU TPUT
Subwoofer
VOLUME
BASS
TREBLE
R L
ON
OFF
AC IN
MODEL: M-900
MADE IN CHINA
MULTIMEDIA SPEAKER
AUDI O INPUT
AUDI O OUTPU T
VOLU ME
BASS
TREB LE
80-M900(11)-97-0001-01 2011-12-01

45 Watt RMS
10 Watt x 2+ 25 Watt RMS
< 0.3% 1 W 1 kHz
30 Hz - 20 kHz
> 75 dB
> 45 dB
NA
NA
3" x 2
10 Watt x 2, 6 ohm
6.5"
30 Watt, 8 ohm
1" x 2
5 Watt x 2, 8 ohm
2RCA
3.5 mm stereo
Installation:
Operation:
Prior to connecting the speakers, ensure the AC power plug is removed from the AC source.
Secondly ensure the volume knob is set to minimum.
1. Connect the left satellite speaker cable to the left audio output jack at the rear of the
subwoofer.
2. Connect the right satellite speaker cable to the right audio output jack.
3. Place both satellites on extreme sides forward of the listening position. The subwoofer
can be placed on the floor at any position since bass is not directional.
4. Next, connect the playback source to the 3.5 mm stereo audio input jacks. Playback
source can be from Mp3/Mp4, CD/DVD player, TV or PC.
5. Last, connect the AC power cord to the AC power supply. Please ensure the AC power
ratings printed on the rear panel match with your country’s AC power ratings. Using
unmatched ratings can damage the speaker system.
1. Set the master volume level to the minimum.
2. Turn on the system power from the AC switch at the rear of the subwoofer. The front
white LED will illuminate and blink slowly.
3. Next depress the MUTE button on the front panel to activate the system. The white LED
will illuminate steadily. During playback, depress this button to silence the playback. The
white LED will blink during MUTE function.
3. Start the media player and its music playback.
4. Slowly increase the volume level to your preferred level. The master volume knob is
located in the front panel of the subwoofer.
5. For personal sound effects, you can adjust the treble and bass volume levels in the front.
- The end -
© 2011 Microlab Electronics Co., Ltd All rights reserved.
Dome tweeter type
Dome tweeter rated power
Interfaces
80-M900(11)-97-0001-01 2011-12-01