Microlife BP W100 User manual

Microlife BP W100
Europe / Middle-East / Africa
Microlife AG
Espenstrasse 139
9443 Widnau / Switzerland
Tel. +41 / 71 727 70 30
Fax +41 / 71 727 70 39
Email [email protected]
www.microlife.com
IB BP W100 V13-1 0511
EN Ä1
FR Ä12
NL Ä24
SV Ä36
FI Ä46
DA Ä56
NO Ä66
LV Ä76
LT Ä86
EE Ä96
RU Ä106
DE Ä118
IT Ä129
North / Central / South America
Microlife USA, Inc.
1617 Gulf to Bay Blvd., 2nd Floor Ste A
Clearwater, FL 33755 / USA
Tel. [phone]
Fax [phone]
Email [email protected]
www.microlife.com
Asia
Microlife Corporation.
9F, 431, RuiGang Road, NeiHu
Taipei, 114, Taiwan, R.O.C.
Tel. [phone]
Fax.[phone]
Email [email protected]
www.microlife.com

1
Microlife BP W100
1
4
2
3
6 5
I
AT
7
8
9
AO
AK
AN
AL AM
II
Guarantee Card BP W100
Name of Purchaser / Nom de l'acheteur / Naam koper / Inköparens namn / Ostajan
nimi / Forhandlers navn / Kjøpers navn / Pircēja vārds / Pirkėjo pavardė/ Ostja nimi /
Ф.И.О. покупателя /
Name des Käufers / Nome del rivenditore
Serial Number / Numéro de série / Serienummer / Serienummer / Sarjanumero /
Serienummer / Serienummer / Sērijas numurs / Serijos numeris / Seerianumber /
Серийный номер / Serien-Nr. /
Numero di serie
Date of Purchase / Date d'achat / Datum van aankoop /
Inköpsdatum / Ostopäivä-
määrä / Købsdato / Kjøpsdato / Legādes datums / Pardavimo data / Ostukuupäev /
Дата покупки / Kaufdatum /
Data d’acquisto
Specialist Dealer / Revendeur / Specialist Dealer /
Återförsäljare / Alan kauppias /
Specialforhandler / Spesialist forhandler / Speciālists - pārstāvis / Pardavusi įstaiga /
Ametlik müügiesindaja /
Специализированный дилер / Fachhändler / Categoria
rivenditore

1BP W100 EN
Display
Dear Customer,
Your new Microlife blood pressure monitor is a reliable medical
instrument for taking measurements on the wrist. It is simple to use,
accurate and comes highly recommended for blood pressure moni-
toring in your home. This instrument was developed in collaboration
with physicians and clinical tests prove its measurement accuracy to
be very high.*
Please read through these instructions carefully so that you under-
stand all functions and safety information. We want you to be happy
with your Microlife product. If you have any questions, problems or
want to order spare parts, please contact Microlife-Customer
Service. Your dealer or pharmacy will be able to give you the address
of the Microlife dealer in your country. Alternatively, visit the Internet
at www.microlife.com where you will find a wealth of invaluable
information on our products.
Stay healthy – Microlife AG!
* This instrument is clinically tested according to the British Hyper-
tension Society (BHS) protocol. Highest possible grading for Systolic
(A) and Diastolic (A) measurement accuracy.
Microlife BP W100 EN
1ON/OFF Button
2Display
3Battery Compartment
4Cuff
5M-Button (Memory)
6Time Button
7Systolic Value
8Diastolic Value
9Pulse
AT Date/Time
AK Alarm Time
AL Stored Value
AM Heart Arrhythmia Indicator
AN Pulse Rate
AO Battery Display
Read the instructions carefully before using this device.

2
Table of Contents
1. Important Facts about Blood Pressure and Self-Measurement
•How do I evaluate my blood pressure?
2. Using the Instrument for the First Time
•Activating the fitted batteries
•Setting the date and time
3. Taking a Blood Pressure Measurement using this Instrument
4. Appearance of the Heart Arrhythmia Indicator for early
Detection
5. Data Memory
•Viewing the stored values
•Memory full
•Clearing all values
•How not to store a reading
6. Setting the Alarm Function
7. Battery Indicator and Battery change
•Low battery
•Flat battery – replacement
•Using rechargeable batteries
8. Error Messages
9. Safety, Care, Accuracy Test and Disposal
•Safety and protection
•Instrument care
•Cleaning the cuff
•Accuracy test
•Disposal
10. Guarantee
11. Technical Specifications
Guarantee Card
1. Important Facts about Blood Pressure and Self-
Measurement
•
Blood pressure is the pressure of the blood flowing in the arteries
generated by the pumping of the heart. Two values, the
systolic
(upper) value and the
diastolic (lower) value, are always measured.
•The instrument also indicates the pulse rate (the number of times
the heart beats in a minute).

3BP W100 EN
•Permanently high blood pressure values can damage your
health and must be treated by your doctor!
•Always discuss your values with your doctor and tell him/her if
you have noticed anything unusual or feel unsure. Never rely on
single blood pressure readings.
•A number of factors can affect the accuracy of measure-
ments taken on the wrist. In some cases, the result may differ
from the measurement taken on the upper arm. We therefore
advise you to compare these values with those produced by the
upper arm measurement and discuss them with your doctor.
•Enter your readings in the enclosed blood pressure diary. This
will give your doctor a quick overview.
•
There are many causes of excessively high blood pressure
values
. Your doctor will explain them in more detail and offer treat-
ment where appropriate. Besides medication, relaxation tech-
niques, weight loss and exercise can also lower your blood pressure.
•Under no circumstances should you alter the dosages of
any drugs prescribed by your doctor!
•Depending on physical exertion and condition, blood pressure is
subject to wide fluctuations as the day progresses. You should
therefore take your measurements in the same quiet condi-
tions and when you feel relaxed. Take at least two measure-
ments per day, one in the morning and one in the evening.
•It is quite normal for two measurements taken in quick succession
to produce significantly different results.
•Deviations between measurements taken by your doctor or in the
pharmacy and those taken at home are quite normal, as these situ-
ations are completely different.
•Several measurements provide a much clearer picture than just
one single measurement.
•Leave a small break of at least 15 seconds between two
measurements.
•If you are pregnant, you should monitor your blood pressure very
closely as it can change drastically during this time!
•If you suffer from an irregular heartbeat (arrhythmia, see
«Section 4.»), measurements taken with this instrument should
only be evaluated after consultation with your doctor.
•The pulse display is not suitable for checking the
frequency of heart pacemakers.

4
How do I evaluate my blood pressure?
The higher value is the one that determines the evaluation. Example:
a readout value between 150/85 or 120/98 mmHg indicates «blood
pressure too high».
2. Using the Instrument for the First Time
Activating the fitted batteries
Pull out the protective strip projecting from the battery compartment 3.
Setting the date and time
3. Taking a Blood Pressure Measurement using this
Instrument
Table for classifying blood pressure values in adults in accordance
with the World Health Organisation (WHO) in 2003. Data in mmHg.
Range Systolic Diastolic Recommendation
blood pressure
too low z100 z60 Consult your doctor
1. blood pressure
optimum 100 - 120 60 - 80 Self-check
2. blood pressure
normal 120 - 130 80 - 85 Self-check
3. blood pressure
slightly high 130 - 140 85 - 90 Consult your doctor
4. blood pressure
too high 140 - 160 90 - 100 Seek medical advice
5. blood pressure
far too high 160 - 180 100 - 110 Seek medical advice
6. blood pressure
dangerously high 180 y110 yUrgently seek medical advice!
1. After the new batteries are fitted, the year number flashes in the
display. You can set the year by pressing the M-button 5. To
confirm and then set the month, press the time button 6.
2. You can now set the month using the M-button. Press the time
button to confirm and then set the day.
3.
Please follow the instructions above to set the day, hour and minutes.
4. Once you have set the minutes and pressed the time button, the
date and time are set and the time is displayed.
5. If you want to change the date and time, press and hold the time
button down for approx. 3 seconds until the year number starts to
flash. Now you can enter the new values as described above.
Checklist for taking a reliable measurement
1. Avoid activity, eating or smoking immediately before the
measurement.

5BP W100 EN
4. Appearance of the Heart Arrhythmia Indicator for
early Detection
This symbol AM indicates that certain pulse irregularities were detected
during the measurement. In this case, the result may deviate from your
normal blood pressure – repeat the measurement. In most cases, this is
no cause for concern. However, if the symbol appears on a regular basis
(e.g. several times a week with measurements taken daily) we advise you
to tell your doctor. Please show your doctor the following explanation:
2. Sit down for at least 5 minutes before the measurement and relax.
3. Always take the measurement on the left arm while in a sitting
position.
4. Remove any items of clothing and your watch, for example, so
that your wrist is free.
5. Always ensure that the cuff is positioned correctly, as shown in
the pictures illustrated on the short instruction card.
6. Fit the cuff comfortably but not too tight. The cuff will cover a
wrist diameter of 13.5 to 21.5 cm (5.25 - 8.5 inches).
7. Support your arm in a relaxed position and ensure that the
instrument is at the same height as your heart.
8. Press the ON/OFF button 1to start the measurement.
9. The cuff will now pump up automatically. Relax, do not move
and do not tense your arm muscles until the measurement
result is displayed. Breathe normally and do not talk.
10. When the correct pressure is reached, the pumping stops and the
pressure falls gradually. If the required pressure was not reached,
the instrument will automatically pump some more air into the cuff.
11. During the measurement, the heart symbol AN flashes in the
display and a beep sounds every time a heartbeat is detected.
12. The result, comprising the systolic 7 and the diastolic 8 blood
pressure and the pulse
9 is displayed and longer beep is heard.
Note also the explanations on further displays in this booklet.
13. Remove and switch off the monitor and enter the result in the
enclosed blood pressure pass. (The monitor does switch off
automatically after approx. 1 min.).
)You can stop the measurement at any time by pressing the
ON/OFF button (e.g. if you feel uneasy or an unpleasant pres-
sure sensation).

6
5. Data Memory
At the end of a measurement, this instrument automatically stores
each result, including date and time.
Viewing the stored values
Press the M-button 5briefly, when the instrument is switched off.
The display first shows «M» AL and then a value, e.g. «M 17». This
means that there are 17 values in the memory. The instrument then
switches to the last stored result.
Pressing the M-button again displays the previous value. Pressing
the M-button repeatedly enables you to move from one stored value
to another.
Memory full
Clearing all values
If you are sure that you want to permanently remove all stored
values, hold down the M-button (the instrument must have been
switched off beforehand) until «CL» appears and then release the
button. To permanently clear the memory, press the M-button while
«CL» is flashing. Individual values cannot be cleared.
How not to store a reading
Press the ON/OFF button 1while the reading is being displayed.
Keep the button pressed until «M» AL is flashing and then release it.
Confirm by pressing the M-button.
Information for the doctor on frequent appearance of the
Arrhythmia indicator
This instrument is an oscillometric blood pressure monitor that also
analyses pulse frequency during measurement. The instrument is
clinically tested.
The arrhythmia symbol is displayed after the measurement, if pulse
irregularities occur during measurement. If the symbol appears
more frequently (e.g. several times per week on measurements
performed daily) we recommend the patient to seek medical advice.
The instrument does not replace a cardiac examination, but serves
to detect pulse irregularities at an early stage.
When the memory has stored 200 results, the memory is full.
From this point onwards, a new measured value is stored by
overwriting the oldest value.

7BP W100 EN
6. Setting the Alarm Function
This instrument allows you to set 2 alarm times at which an alarm
signal will then be triggered. This can be a useful aid, for instance as
a reminder to take medication.
7. Battery Indicator and Battery change
Low battery
When the batteries are approximately ¾ empty the battery symbol AO
will flash as soon as the instrument is switched on (partly filled battery
displayed). Although the instrument will continue to measure reliably,
you should obtain replacement batteries.
Flat battery – replacement
When the batteries are flat, the battery symbol AO will flash as soon
as the instrument is switched on (flat battery displayed). You cannot
take any further measurements and must replace the batteries.
1.
To set an alarm time, press the time button 6 (the instrument must
have been switched off beforehand) and immediately afterwards
the M-button
5 and hold both down until the bell symbol AK
appears in the bottom left of the display. Then release both buttons.
The flashing «
1 » in the display indicates that the first alarm time
can now be set.
2. Press the time button to set the hours – the hour display flashes
and pressing the M-button allows you to set the alarm hour. To
confirm, press the time button.
3. The minute display will now flash. The minutes can be set using
the M-button. To confirm, press the time button again.
4.
The bell symbol will now flash. Use the M-button to select whether
the alarm time is to be active (bell) or inactive (crossed-out bell). To
confirm, press the time button.
X
To set a second alarm time, proceed as above but if the « 1 » flashes,
press the M-button to select «
2 » and confirm with the time button.
X
An active alarm time is indicated by the bell symbol in the display.
X
The alarm will sound at the set time every day.
X
To switch-off the alarm when it is sounding, press the ON/OFF button 1 .
X
To permanently switch off the alarm, proceed as above and select the
crossed-out bell symbol. This will then disappear from the display.
X
The alarm times must be re-entered each time the batteries are
replaced.
1. Open the battery compartment 3by pulling off the cap.
2. Replace the batteries – ensure correct polarity as shown by the
symbols in the compartment.
3.
To set date and time, follow the procedure described in «Section 2.».

8
Using rechargeable batteries
You can also operate this instrument using rechargeable batteries.
8. Error Messages
If an error occurs during the measurement, the measurement is inter-
rupted and an error message, e.g. «ERR 3», is displayed.
)
The memory retains all values although date and time (and
possibly also set alarm times) must be reset – the year number
therefore flashes automatically after the batteries are replaced.
)Use 2 new, long-life 1.5V, size AAA batteries.
)Do not use batteries beyond their date of expiry.
)Remove batteries if the instrument is not going to be used for
a prolonged period.
)Only use «NiMH» type reusable batteries.
)Batteries must be removed and recharged when the flat
battery symbol appears. They should not remain inside the
instrument as they may become damaged (total discharge as
a result of low use of the instrument, even when switched off).
)Always remove the rechargeable batteries if you do not intend
to use the instrument for a week or more.
)Batteries cannot be charged in the blood pressure monitor.
Recharge batteries in an external charger and observe the
information regarding charging, care and durability.
Error Description Potential cause and remedy
« ERR 1 » Signal too
weak The pulse signals on the cuff are too weak. Re-position the cuff and repeat the
measurement.*
«
ERR 2 » Error signal During the measurement, error signals were
detected by the cuff, caused for instance by
movement or muscle tension. Repeat the
measurement, keeping your arm still.
«
ERR 3 » No pressure
in the cuff An adequate pressure cannot be generated in the cuff. A leak may have occurred. Check
that the cuff is correctly connected and is
not too loose. Replace the batteries if neces-
sary. Repeat the measurement.
«
ERR 5 » Abnormal
result Themeasuringsignals are inaccurateandno result can therefore be displayed. Read
through the checklist for performing reliable
measurements and then repeat the
measurement.*