Microtech 14109805 Series User manual

PRECISION TABLET CALIPER
MICROTECH
Patent #100613
Serial №
ISO 17025:2005 (cert. № 4K051)
Quality management system
ISO 9001:2015 (cert. № U228396)
www.microtech.ua

1 MAIN SPECIFICATIONS
Item № Range,
mm
Resolution,
mm Force, N Max error, mm
14109805X 0-500 0.001 20 ±0.020
14109810X 0-1000 0.001 20 ±0.030
14109815X 0-1500 0.001 20 ±0.030
14109820X 0-2000 0.001 20 ±0.040
Operating conditions from +10 оС to +35 оС.
*Optionally Tablet caliper can be equipped with outside Pyrometer for
Temperature compensation.
2 OPERATING INSTRUCTIONS
2.1 If necessary, charge the battery of Tablet caliper. During a using see
status of battery on screen of Tablet.
2.2 For switch on press SWITCH ON button during 3 sec- the indicator
will starting. Software will loading during 30 sec. Sometimes for data
showing it’s necessary press Button A once
2.3 For switch off press SWITCH ON button during 3 sec. For energy
saving mode press SWITCH ON button once.
2.4 For zero setting press ZERO button inside software. Or Button A
during 2 sec.

2.5 Information about functions and using MICROTECH Software
available on www.microtech.ua.
2.6 This Tablet caliper equipped with Built-in Wireless data output
module for transfer measuring results to Android devices or Windows PC (on
these devices must be installed MICROTECH SPC software).
2.7 Also you can connect other Wireless MICROTECH devices to this
caliper for receiving and collecting data. (It’s necessary to switch on
Bluetooth module throw Android settings).
2.8 During the measurement, measuring jaws should to sum to the measured
object without knocking.
2.9 During the measurement avoid warps of measuring surfaces of the
instrument. Measuring surface must be fully in contact with the measurement
object.
WARNING!
IN THE PROCESS OF WORKING WITH CALIPERS SHOULD BE AVOIDED:
Scratches on the measuring surfaces;
Measuring the size of object in the process of machining;
Shocks or dropping, avoid bending of rod or other surfaces.
3 WARRIANTY
MICROTECH guarantees within the warranty period of 12 months.
Detailed information is available at: www.microtech-ua.com/warranty
Director MICROTECH, Ph.d. _______________/Boris Kramarenko/

СALIBRATION PROTOCOL
Item No______________ Serial No__________
Measuring range ______mm Resolution 0,001 mm
Reference temperature __°C Calibration date _______
Results Nominal Measured Max. error
mm
mm
mm
External
measurement
0,0
21,2
30,0
41,3
51,4
71,5
101,6
126,8
131,4
175,6
225,7
243,5
281,2
400,0
500,0
Parallelism of measuring surfaces
Flatness of measuring surfaces
Roughness of measuring surfaces Ra<0.32 μm
Head of the MICROTECH calibration lab. _____ /Tatyana Guz/