Midea AC100-U User manual

GD Midea Environment Appliances MFG.CO.,Ltd.
Midea Industrial Park, Dongfu Road, Dongfeng Town, Zhongshan, Guangdong,
528425, P.R.China
ELECTRIC FAN
OWNER’S MANUAL
AIR COOLER
MODEL:AC100-U
READ AND SAVE THESE INSTRUCTIONS
Attention: Pictures in the IM are for reference only.

1. Non-specialized personnel or unauthorized repair personnel shall
not to repair or modify the machine.
2. It is forbidden to operate with wet hands to avoid electric shock.
3. Any power cord, which suffers from aging and knotting and whose
plug is damaged, should be stopped its use immediately, and must
be repaired by a professional manufacturer or equally qualified
personnel.
4. No cleaning, maintenance or movement of the unit is allowed if it
does not switch off.
5. If the unit is not in use for a long time, unplug the power cord.
6. To prevent accidental injury or damage to the unit, please do not
insert any foreign matter into the air inlet and outlet, because the
unit incorporates a high-speed wind rotor,
7. It is prohibited to use this unit in environments with flammable and
explosive gases and direct sunlight for a long period shall be
avoided.
8. Do not place this unit in an inclined or other uneven place to
prevent the unit from falling and causing damage to the unit or
internal parts.
9. This machine is suitable for indoor use instead of outdoor use.
10. This machine has a safety switch. If the honeycomb filter support
has not been installed well, the unit will not work as usual; when
the machine is working, do not remove the honeycomb filter frame.
11. At any time the water level in the tank shall not exceed "MAX"
(maximum) scale, and during humidification, the total water level in
the tank shall be controlled, and shall not be below "MIN"
(minimum) scale.
12. After the water tank is filled with water, do not tilt or collide with the
unit when placing or moving it. To move the unit body, please drive
it slowly from the side to prevent water overflow.
13. In using the unit, prohibit overturning to avoid any accident. If the
unit topples over accidentally, and it contains water, unplug the
power cord immediately and take it to repair store.
14. Do not place items on the unit, and covering the outlet is strictly
prohibited.
SAFETY INSTRUCTION
1

15. When wash the unit appearance, apply a damp cloth (or add a
little cleaning agent) to wipe, and never use corrosive cleaning
agent or solvent for cleaning. Never rinse the unit with water.
16. Do not have the air inlet and outlet of the unit close to walls,
curtains and other objects, or they may block the airflow and affect
air supply.
17. When the unit is running, do not knock at or shock the unit body
forcibly or it may lead to automatic shutdown, in which case simply
restart the unit.
18. In summer, the water in the tank may easily deteriorate and
generate odor, please pay attention to regular change of water; if
the indoor temperature is below zero in winter humidification, it is
best to use warm water for humidification.
19. Do not place the unit directly below the power outlet.
20. Do not use the unit around the tub, sprinkler or swimming pool.
21. Product repair must be carried out in a designated agency.
22. If the supply cord is damaged, it must be replaced by manufacturer
or its service agent or a similarly qualified person in order to avoid a
hazard.
23. Indoor use only.
24. To protect against the risk of electrical shock, do not immerse the
unit, cord or plug in water or other liquid.
25. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety. Young children should be
supervised to ensure that they do not play with the appliance.
26. When the appliance is not in use and before cleaning, unplug the
appliance from the outlet.
27. Keep electrical appliances out of reach from Children or infirm
persons. Do not let them use the appliances without supervision.
28. Unplug the appliance during filling and cleaning.
29. Prior to cleaning or other maintenance, the appliance must be
disconnected from the supply mains.
30. Use a soft cloth moisten with mild soap, and then use a dry cloth
to wipe it again.
2

Model
Voltage/frequency
Watt
Rated output of air
Rated evaporation
AC100-U
220-240V
50W
310m3/h
700mL/h
31.
Correct Disposal of this product
This marking indicates that this product should not be disposed with
other household wastes throughout the EU. To prevent possible harm
to the environment or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and
collection systems or contact the retailer where the product was
purchased. They can take this product for environmental safe recycling.
3
Ice box
Honeycomb
filter frame
Honeycomb
filter
Water tank
Water tank cover
Remote controller
STRUCTURAL DIAGRAM
MODEL & SPECIFICATION

1. Unfold the package and take out the air cooler, put it on the ground.
2. Check out the spare part.
3. Install the universal wheels: Take out the universal wheel and install them on the air cooler.
(Fig.1)
5. Check the power cord to find whether it is same with the rating label.
Attention: Do not connect the power cord with a wet hand.
When connect the power cord, please make it contact well.
When remove the machine, please pull out the power cord.
4. Watering: Pull out the water tank from the body about 1/3, and pour water into the
water tank. If you want to remove the water tank only do so when the power has been
switched off for a minimum of 2 minutes.
Attention:
Pay attention to the water line when watering.
When watering, the water must not be higher than the“MAX”water line. When
humidifying, the water must not be lower thanthe “MIN” water line.
If need to increase the cooling effect, can put the frozen ice box into the water tank.
(Fig.2)
Control panel
Wheels
Fig.2
Fig.1
4
Water tank
Add water and
Frozen ice box
ON/OFF
TIMER NATURAL SPEED OSC.
ION
EVA. /
COOLER
INSTALLATION AND USE
KEY CONTROL

1. Open the remote controller rear cover and set a CR2032
battery; then the remoter control can be used. It has the
same button with the control board.
2. The effective distance for the remote controller is 6 meter.
5
7、
EVA./COOLER: Press the EVA./COOLER button once, the unit will act as a evaporator now.
If combined with Ice box, this unit can lower its surrounding about 3°C.
1、ON/OFF: Plug the unit into an electric outlet, the until will be ready to run. Press the ON/OFF
button to start running.
2、 OSC.: Press the OSC. button once to turn on the oscillation and the wind will oscillate in
horizontally 120 degrees, press it again to stop.
3、 SPEED: When the air cooler is turned on, the fan will run at medium speed for 3 seconds
before running at low speed (default speed). Press the SPEED button each time, the fan speed
will recycle as shown below:
4、
STYLE / NATURAL: Press the NATURAL button once to turn on this feature. Controlled by
the special program in the microcomputer chip, the fan will be switched among high speed,
medium speed, low speed and stop automatically according to the default settings. it is
simulated like natural breeze.
5、
TIMER: When the air cooler is running, press the TIMER button to preset the running time,
and the presetting time will recycle each time pressing this button as shown below:
6、
ION: Press this button, the function of Anion is turned on. Press the button again, this function
is turned off.
Ice Box
Remote Controller
The ice box can absorb the heat in the water, which can lower the temperature of the water tank.
It can make the air cooler flow cooler air.
Use method:
1. Take out the ice box and put it into the refrigerator, till the ice box is totally frozen.
2. Put the frozen ice box into the water tank.
ION
ON/OFF
SPEED
EVAPORATOR
TIMEROSC.
STYLE
cancel
OPERATING INSTRUCTIONS

Please check the following items before having it repaired
Problem Reason Solution
Unit will not operate
1、ON/OFF key has not been
pressed.
2、The unit is unplugged.
3、The blind cloth frame has
not been installed and locked
into place
1、Press the ON/OFF key.
2、Check to make sure the unit
is plugged in.
3、Check to make sure the filter
is properly installed and the
inlet grill is installed and locked
into place.
Dedusting effect is poor
1、The honeycomb filter
is blocked
2、The air inlet is blocked
1、Pull down the honeycomb
filter and clean it.
2、Remove the foreign matter
Warning:
Prior to cleaning or other maintance, the Air cooler must cut off the power and pull out
the plug;
Non-professional maintenance personnel, please don't dismantle the power cord.
Per fig.2 fig 3 and fig 4: Unplug the unit for two minutes, take out filter, filter frame, honey
comb filter and water tank seperately, wash them with detergent and soft brush, then put
them back to the unit.
Fig.3 Fig.4
Take out the honey comb filter
6
Take out the
filter frame
MAINTENANCE AND CLEAN
TROUBLESHOOTING