Midea MSV1-18HRN1 User manual

Before using your air conditioner, please read
this manual carefully and keep it for future reference.
SPLIT TYPE
ROOM AIR CONDITIONER
-
Before using your air conditioner, please read
this manual carefully and keep it for future reference.
SPLIT TYPE
ROOM AIR CONDITIONER
-
Before using your air conditioner, please read
this manual carefully and keep it for future reference.
SPLIT TYPE
ROOM AIR CONDITIONER
-
Before using your air conditioner, please read
this manual carefully and keep it for future reference.
SPLIT TYPE
ROOM AIR CONDITIONER
-
Before using your air conditioner, please read
this manual carefully and keep it for future reference.
SPLIT TYPE
ROOM AIR CONDITIONER
-
Before using your air conditioner, please read
this manual carefully and keep it for future reference.
SPLIT TYPE
ROOM AIR CONDITIONER
-
Before using your air conditioner, please read
this manual carefully and keep it for future reference.
SPLIT TYPE
ROOM AIR CONDITIONER
-
Before using your air conditioner, please read
this manual carefully and keep it for future reference.
SPLIT TYPE
ROOM AIR CONDITIONER
-
Before using your air conditioner, please read
this manual carefully and keep it for future reference.
SPLIT TYPE
ROOM AIR CONDITIONER
-
Before using your air conditioner, please read
this manual carefully and keep it for future reference.
SPLIT TYPE
ROOM AIR CONDITIONER
-
Before using your air conditioner, please read
this manual carefully and keep it for future reference.
SPLIT TYPE
ROOM AIR CONDITIONER
-
Before using your air conditioner, please read
this manual carefully and keep it for future reference.
SPLIT TYPE
ROOM AIR CONDITIONER
-
Before using your air conditioner, please read
this manual carefully and keep it for future reference.
SPLIT TYPE
ROOM AIR CONDITIONER
-
Prior to installation this air-conditioning unit
must be submitted for approval by the utility
service which provides electricity.

1. Safety precautions..........................................................................................2
2. Parts identification..........................................................................................5
3. Special function............................................................................................. 6
4. Manual operation......................................... ................................................ .7
5. Adjusting air flow direction..............................................................................7
6. Optimal operation .........................................................................................8
7. How the air conditioner works........................................................................9
8. Operating tips.................................................................................................9
9. Cleaning and maintenance ...........................................................................11
10. Troubleshooting tips.....................................................................................13
CONTENTS
Inside you will find many helpful hints on how to use and maintain your air conditioner
properly. Just a little preventative care on your part can save you a great deal of time
and money over the life of your air conditioner. You'll find many answers to common
problems in the chart of troubleshooting tips. If you review the chart of Troubleshooting
Tips first, you may not need to call for service.
Contact an authorised service technician for repair or maintenance of this unit.
Contact the installer for installation of this unit.
The air conditioner is not intended for use by young children or invalids without
supervision.
Young children should be supervised to ensure that they do not play with the air
conditioner.
If the power cord is to be replaced, replacement work shall be performed by
authorised personnel only.
Installation work must be performed in accordance with the national wiring standards
by authorised personnel only.
!CAUTION
Read This Manual
1
IMPORTANT NOTES:
1. Do not operate unit with horizontal louvre in closed position.
2. Do not operate unit without the air filter.

2
To prevent injury to the user or other people and property damage, the following instructions
must be followed.
Incorrect operation due to ignoring of instructions may cause harm or damage. The
seriousness is classified by the following indications.
Safety Precautions
This symbol indicates the possibility of death or serious injury.
Meanings of symbols used in this manual are as shown below.
!
!
WARNING
Always do this.
Never do this.
!
CAUTION
This symbol indicates the possibility of injury or damage to property.
Plug in power plug
properly.
Do not modify power cord
length or share the outlet
with other appliances.
Always ensure effective
earthing.
Unplug the unit if strange
sounds, smell or smoke
comes from it.
Keep firearms away.
Ventilate room before operating air
conditioner if there is a gas leakage from
another appliance.
Otherwise, it may cause electric
shock or fire due to excess heat
generation.
It may cause electric shock or
fire due to heat generation.
No earthing may cause electric
shock.
It may cause fire and electric
shock.
It may cause fire.
It may cause explosion, fire and, burns.
It may cause electric shock or fire
due to heat generation.
It may cause electric shock.
It may cause failure of machine
or electric shock.
It may cause fire and electric
shock.
It may cause fire and electric
shock.
It may cause electric shock or fire.
If the power cord is damaged, it
must be replaced by the manufac-
turer or an authorised service
center or a similarly qualified per-
son in order to avoid a hazard.
This could damage your health.
No installation may cause fire
and electric shock.
It may cause electric shock.
It may cause an explosion or fire.
It may cause failure and electric shock.
Do not operate or stop the
unit by inserting or pulling
out the power plug.
Do not operate with wet
hands or in damp
environment.
Do not allow water to run
into electric parts.
Do not use the socket if it is
loose or damaged.
Do not use the power cord
close to heating appliances.
Do not damage or use an
unspecified power cord.
Do not direct airflow at
room occupants only.
Always install circuit
breaker and a dedicated
power circuit.
Do not open the unit
during operation.
Do not use the power cord near
flammable gas or combustibles, such
as gasoline, benzene, thinner, etc.
Do not disassemble or modify unit.
!!
!!
!!
!!
!!
WARNING
!
!!

3
!
CAUTION
When the air filter is to be
removed, do not touch the
metal parts of the unit.
It may cause an injury.
Do not clean unit when power
is on as it may cause fire and
electric shock, it may cause an
injury.
Operation with windows
opened may cause wetting of
indoor and soaking of house-
hold furniture.
When the unit is to be cleaned,
switch off, and turn off the
circuit breaker.
Stop operation and close the
window in storm or hurricane.
Use caution when unpacking and
installing. Sharp edges could cause injury.
Do not clean the air
conditioner with water.
Water may enter the unit and
degrade the insulation. It may
cause an electric shock.
This could injure the pet or plant.
Failue to do so may cause
electric shock and damage.
Do not put a pet or house
plant where it will be exposed
to direct air flow.
Hold the plug by the head of
the power plug when taking it
out.
Ventilate the room well when
used together with a stove,
etc.
An oxygen shortage may occur.
Do not use this air conditioner to
preserve precision devices, food,
pets, plants, and art objects.
It may cause deterioration of
quality, etc.
It may cause failure of product or
fire.
Do not use for special purposes.
Turn off the main power switch
when not using the unit for a
long time.
If water enters the unit, turn the unit off at the power
outlet and switch off the circuit breaker. Isolate
supply by taking the power-plug out and contact a
qualified service technician.
!!
!!
!!
!!
!!
!!
!!
It may cause failure of
appliance or accident.
Appearance may be
deteriorated due to change of
product color or scratching of
its surface.
Do not place obstacles
around air-inlets or inside of
air-outlet.
Do not use strong detergent
such as wax or thinner. Use
a soft cloth for cleaning.
If bracket is damaged, there is
concern of damage due to
falling of unit.
There is danger of fire or
electric shock.
Ensure that the installation bracket of
the outdoor appliance is not damaged
due to prolonged exposure.
Do not place heavy object on the
power cord and take care so that
the cord is not compressed.
Operation without filters may
cause failure.
It contains contaminants and
could make you sick.
Always insert the filters
securely. Clean filter once
every two weeks.
Do not drink water drained
from air conditioner.
!!
!!

Safety
Precautions Prior to Operation
Preparing for operation
Usage
Cleaning and maintenance
ServiceService
Operating Temperature
COOLING MODE
INDOOR OUTDOOR INDOOR OUTDOOR
HEATING MODE
4
1. Contact an installation specialist for installation.
2. Plug in the power plug properly.
3. Do not use a damaged or non-standard power cord.
4. Do not share the same outlet with other appliances.
5. Do not use an extension cord.
6. Do not start/stop operation by plugging/unplugging the power cord.
1. Exposure to direct airflow for an extended period of time could be hazardous to your
health. Do not expose occupants, pets, or plants to direct airflow for extended
periods of time.
2. Due to the possibility of oxygen deficiency, ventilate the room when used together
with stoves or other heating devices.
3. Do not use this air conditioner for non-specified special purposes (e.g. Preserving
precision devices, food, pets, plants, and art objects). Usage in such a manner could
harm such property.
1. Do not touch the metal parts of the unit when removing the filter. Injuries can occur
when handling sharp metal edges.
2. Do not use water to clean inside the air conditioner. Exposure to water can destroy
the insulation, leading to possible electric shock.
3. When cleaning the unit, first make sure that the power and circuit breaker are turned
off.
For repair and maintenance, contact your authorised service dealer.
MAX. MIN. MAX. MIN.
OO
32 C 17 C OO 30 C 17 C
OO
43 C 18 C
OO
24 C -7 C
MAX. MIN. MAX. MIN.
Note: Optimum performance will be achieved within these operating temperatures.

PARTS IDENTIFICATION
INDOOR UNIT
OUTDOOR UNIT
LCD DISPLAY WINDOW
INDOOR UNIT
Front panel frame
Rear air intake grille
Front panel
Air Purifying filter & Air filter
Horizontal airflow grille
LCD display window
Manual control switch
Drain pipe
Remote controller holder
Remote controller
TURBO indication lamp
Lights up when select TURBO function on cooling
operation or on heating operation.
1
3
4
5
6
7
8
9
10
11
2
Note:
All the pictures in this manual are for explanation purpose only.
They may be slightly different from the air conditioner you
purchased. The actual shape shall prevail.
Vertical airflow grille
12
OUTDOOR UNIT
Connecting pipe
Connective cable
Stop valve
Fan hood
13
14
15
Air intake
13
8
7
9
15 12
10
11
13
5
14
2
4
6
Air outlet
Air intake
Air intake
Air outlet
Signal transmitter
AUTO CLEAN indication lamp
(optional)
Lights up during the Auto operation.
DIGITAL DISPLAY indication lamp
Displays the current setting temperature when
the air conditioner is in operation. When AUTO
CLEAN feature is activated, it displays .
OPERATION indication lamp
This lamp illuminates when the air
conditioner is in operation.
auto
TIMER indication lamp
Lights up during Timer operation.
CLEAN AIR indication lamp
Lights up when CLEAN AIR feature
is activated and Ionizer can generate
abundant anions to fill the room with
refreshing and natural air.
Ion
DEFROST indication lamp
(For reverse cycle model only):
Lights up when the air conditioner starts defrosting
automatically or when the warm air control feature is
activated in heating operation.
Turbo
,,
,,
FAN SPEED indication lamp
Displays the selected fan speed: AUTO(nothing)
and three fan speed levels: LOW( ), MED( )
and HIGH( ).
This display is separated into three zones. Once
the indoor fan is on, the zones illuminate gradually.
5
ADJUST
AUTO
COOL
DRY
HEAT
HEALTH
HIGH
MED
LOW
MODE
FANSPEED
SWING
TIMERON
SLEEP
ON/OFF
TIMEROFF
AUTO
CLEAN
RESETLOCK
SETTEMPERATURE( C)
FOLLOW
ME LED
DISPLAY
CLEAR
AIR
TURBO

Special function
Air quality is the key to comfort, this air conditioner is equipped with Ionizer device.
Ionizer can generate abundant anions to fill the room with refreshing and nature air.
Your whole family will enjoy a natural, pure and healthy air everyday.
CLEAN AIR function
6
When turns off the unit on COOL, DRY, AUTO (Cool) mode, the air conditioner
will continue operating for 10 minutes at LOW fan speed. This will help to dry up the
water (sweating) inside the evaporator, and prevent bacterial from multiplying,
supply clean and fresh air.
This function is a factory default setting. If you want to cancel it, use the remote
controller to select the FAN mode, press the ON/OFF button to turn on the unit,
press the ON/OFF button again to turn off the unit after 5 seconds.
Under DRY & Antibacterial mode, do not restart the air conditioner until the unit is
completely off.
Function used after the Shut Down of cooling operation to clean the Evaporator
and keep it as fresh for the next operation. This function is easy to be operated
as it is accessed through the Remote Controller.
For cooling only models, the air conditioner will operate under FAN ONLY mode
at LOW fan speed for 30 minutes, and then stop the operation and the unit turn off.
For cooling & heating models, the air conditioner will operate : FAN ONLY
mode at Low fan speed(13 minutes)--Heating operation with LOW fan speed
(1 minute)---FAN ONLY operation(2 minutes)--Stop Operation---Turn off the unit.
Note:
This function is only available under COOL(AUTO COOL, FORCED COOL) and
DRY mode.
Before select the function, it is recommended to run the air conditioner under
Cooling operation for about half an hour.
Once the Auto Clean function is activated, all TIMER setting will be cancelled.
During Auto Cleaning operation, Press the AUTO CLEAN button again will stop
the operation and turn off the unit.
Auto Clean function(optional)
Follow Me function
Dry & Antibacterial function
To activate the Follow Me feature, point the remote control towards the unit and
press the Follow Me button. T
If the unit does not receive the
Follow Me signal during any 7 minute interval, the unit will beep to indicate the
Follow Me mode has ended.
he remote display is actual temperature at its location.
The remote control will send this signal to the air conditioner every 3 minutes
interval until press the Follow Me button again.
The remote control serves as a remote thermostat allowing for the precise
temperature control at its location.

Manual operation can be used temporarily in case
you can't find the remote controller or its batteries are
exhausted.
1. Open and lift the front panel up to an angle until it
remains fixed with a clicking sound.
2. Press the button and the Operation lamp lights up,
the unit will operate in "AUTO" mode (the setting
o
temperature is locked on 24 C).
3. Press the button twice to turn off the air conditioner.
Manual operation
Auto/Cool
Manual control
button
Once you push the manual control button, the operation mode is shifted in an order as:
AUTO--COOL--OFF.
Push the manual control button to operate in forced COOL mode, this is used for testing
purposes only. You had better not choose it.
To restore the remote controller operation, use the remote controller directly.
CAUTION:
Adjusting air flow direction
Adjust the air flow direction properly otherwise, it might cause discomfort or
cause uneven room temperatures.
Adjust the horizontal louvre using the remote control.
Adjust the vertical louvre manually.
Adjusting the Vertical Air Flow Direction (up - down)
The air conditioner automatically adjusts the vertical air flow direction in
accordance with the operating mode.
To set the vertical air flow direction
Perform this function while the unit is in operation.
Press the SWING button on the remote control to move the louvre,
and press it again when the louvre gets to the desired direction.
Adjust the vertical air flow direction to the desired direction.
When starting operations, the vertical air flow is automatically set in the
direction written in micro-processor.
To set the horizontal air flow direction (left - right)
Adjust the vertical louvre manually using the lever on the left or right side of
the vertical louvre arm (Depending on model). Take care not to catch fingers
on the fan, horizontal louvre or to damage vertical louvres.
When the air conditioner is in operation and the horizontal louvre is in a
specific position, move the lever at left (or right, depending on model) end of
the air outlet to the desired position.
To automatically swing the air flow direction (up - down)
Perform this function while the air conditioner is in operation.
Keep pressing the SWING button on the remote control for
more than 2 seconds, the horizontal louvres swing automatically.
To stop the function, press the SWING button once again.
7
ADJUST
AUTO
COOL
DRY
HEAT
HEALTH
HIGH
MED
LOW
MODE
FANSPEED
SWING
TIMERON
SLEEP
ON/OFF
TIMEROFF
AUTO
CLEAN
RESETLOCK
SETTEMPERATURE( C)
FOLLOW
ME LED
DISPLAY
CLEAR
AIR
TURBO

The SWING buttons will be disabled when the air
conditioner is not in operation.
Do not operate the air conditioner for long periods with the air
flow direction set downward in cooling or dry mode. Otherwise,
condensation may occur on the surface of the horizontal louvre
causing moisture to drop on to the floor or furnishing.
Do not move the horizontal louvre manually. Always use the
SWING button. If you move this louvre manually, it may
malfunction during operation. If the louvre malfunctions, stop
the air conditioner once and restart it.
When the air conditioner is started immediately after it is
stopped, the horizontal louver might not move for approximately
10 seconds.
Open angle of the horizontal louvre should not be set too small,
as Cooling or Heating performance may be impaired due to too
restricted air flow area.
Do not operate unit with horizontal louvre in closed position.
When the air conditioner is connected to power (initial power),
the horizontal louvre may generate a sound for 10 seconds,
this is a normal operation.
CAUTION
!
Range
8
To achieve Optimal performance, please note the following:
Adjust the air flow direction correctly so that it is not directed on people.
Adjust the temperature to achieve the highest comfort level. Do not adjust the unit to
excessive temperature levels.
Close doors and windows on COOL or HEAT modes, otherwise performance may be reduced.
Use Timer ON button on the remote control to select a time you want to start your air
conditioner.
Do not put any object near air inlet or air outlet, as the efficiency of the air conditioner may be
reduced and the air conditioner may stop running.
Clean the air filter periodically, otherwise cooling or heating performance may be reduced.
Do not operate unit with horizontal louvre in closed position.
Optimal operation

HOW THE AIR CONDITIONER WORKS
The following events may occur during normal operation.
1. Protection of the air conditioner.
Compressor protection
The compressor can't restart for 3 minutes after it stops.
Anti-cold air (Reverse cycle models only)
The unit is designed not to blow cold air on HEAT mode, when the indoor heat exchanger
is in one of the following three situations and the set temperature has not been reached.
A) When heating has just starting.
B) Defrosting.
C) Low temperature heating.
The indoor or outdoor fan stop running when defrosting (Reverse cycle models only).
Defrosting (Reverse cycle models only)
Frost may be generated on the outdoor unit during heat cycle when outdoor temperature
is low and humidity is high resulting in lower heating efficiency of the air conditioner.
.
Operation tips
AUTOMATIC OPERATION
When you set the air conditioner in AUTO mode, it will
automatically select cooling, heating(cooling/heating
models only), or fan only operation depending on what
temperature you have selected and the room temperature.
The air conditioner will control room temperature
automatically round the temperature point set by you.
If the AUTO mode is uncomfortable, you can select
desired conditions manually.
SLEEP OPERATION
When you push SLEEP button during cooling, heating
(cooling only type without),or AUTO operation , the air
conditioner will automatically increase (cooling) or
decrease (heating) 1 per hour. The set temperature
will be steady 2 hours later. The fan speed will be
automatically controlled .
Note: The unit will be automatically turned off after 7
hours when on SLEEP operation.
DRYING OPERATION
The dry mode will automatically select the drying
operation based on the difference between the set
temperature and the actual room temperature.
The temperature is regulated while dehumidifying by
repeating turning on and off of the cooling operation or
fan only. The fan speed is LOW.
Cooling Cooling
Time
DRYING operation
Room
temperature
set temperature
Cooling
Fan only
Fan only
Press Sleep button
1
1
1 hour
1 hour
Set
Temperature
Cooling
Press Sleep button
1
1
1 hour 1 hour
Set
Temperature
Heating
9

Under this condition, the air conditioner will stop heating operation and start defrosting
automatically.
The time to defrost may vary from 6 to 10 minutes according to the outdoor temperature
and the amount of frost buildup on the outdoor unit.
2. A white mist coming out from the indoor unit
A white mist may generate due to a large temperature difference between air inlet and
air outlet on COOL mode in an indoor environment that has a high relative humidity.
A white mist may generate due to moisture generated from defrosting process when the
air conditioner restarts in HEAT mode operation after defrosting.
3. Low noise of the air conditioner
You may hear a low hissing sound when the compressor is running or has just stopped
running. This sound is the sound of the refrigerant flowing or coming to a stop.
You can also hear a low "squeak" sound when the compressor is running or has just
stopped running. This is caused by heat expansion and cold contraction of the plastic
parts in the unit when the temperature is changing.
A noise may be heard due to louvre restoring to its original position when power is first
turned on.
4. Dust is blown out from the indoor unit.
This is a normal condition when the air conditioner has not been used for a long time or
during first use of the unit.
5. A peculiar smell comes out from the indoor unit.
This is caused by the indoor unit giving off smells permeated from building material, from
furniture, or smoke.
6. The air conditioner turns to FAN only mode from COOL or HEAT (reverse cycle models
only) mode.
When indoor temperature reaches the temperature setting on air conditioner, the compressor
will stop automatically, and the air conditioner turns to FAN only mode. The compressor will
start again when the indoor temperature rises on COOL mode or falls on HEAT mode
(reverse cycle models only) to the set point.
7. Dripping water may generate on the surface of the indoor unit when cooling in a high
relatively humidity (relative humidity higher than 80%). Adjust the horizontal louvre to the
maximum air outlet position and select HIGH fan speed.
8. Heating mode (Reverse cycle models only)
The air conditioner draws in heat from the outdoor unit and releases it via the indoor unit
during heating operation. When the outdoor temperature falls, heat drawn in by the air
conditioner decreases accordingly. At the same time, heat loading of the air conditioner
increases due to larger difference between indoor and outdoor temperature. If a comfortable
temperature can't be achieved by the air conditioner, we suggest you use a supplementary
heating device.
9. Auto-restart function
After the power cut-off, the air conditioners can automatically restore the previous function setting.
10. Lightning or a car wireless telephone operating nearby may cause the unit to malfunction.
Disconnect the unit with power and then re-connect the unit with power again. Push the
ON/OFF button on the remote controller to restart operation.
10

WARNING: Before performing any maintenance, turn off the main power to the system.
1. Use a dry cloth.
2. A cloth dampened with cold water may be used if the indoor unit is very dirty.
3. The front panel of the indoor unit can not be removed. Wipe it with a dry cloth
after cleaned.
Cleaning the indoor unit
Caution
Do not use detergent or other chemical products during cleaning. Further, do not put
these products near the indoor unit.
Do not use benzine, thinner, polishing powder or other similar solvent to clean the unit.
Thinner
No
Household
Drain
Cleaner
Cleaning and Maintenance
!
No
11
Cleaning the Air filter
CAUTION: Turn the system off before cleaning.
The air filters behind the front panel should be checked and cleaned once every 2 weeks or
more often if necessary. A clogged air filter will reduce cooling/heating efficiency.
1. Grasp both sides of the panel and pull it down, the panel opened upward to an angle
of 15 . Push the panel upward and then lift it up.
2. Take hold of the handle of the air filter and lift it up slightly to take it out from the filter holder,
then pull it downwards.
Air filter handle
Air filter

12
Check if the air inlet or outlet is blocked after the air conditioner has not been used for a long
time. If yes, clean them.
Perform the following operation if the air conditioner is not going to be used for
a long time:
1. Clean the indoor unit and air filter.
2. Select FAN only mode, let the indoor fan run for a while to dry the inside of the unit.
3. Disconnect the power supply and remove battery from the remote control.
4. Check components of the outdoor unit periodically. Contact a local dealer or a customer
service centre if the unit requires servicing.
MAINTENANCE
Note: Before you clean the air conditioner, be sure to switch the unit off and disconnect the
power supply plug.
1. Check that the wiring is not damaged or disconnected.
2. Check that the air filter is installed.
3. Check if the air outlet or inlet is blocked.
Check before operate the unit after a long time unused:
3. Remove the AIR FILTER from the indoor unit.
Clean the AIR FILTER once two weeks.
Clean the AIR FILTER with a vacuum cleaner or water, then dry it up in cool place.
4. Install the air filter back into position.
5. Insert the upper portion of air filter back into the unit taking care that the left and right edges
line up correctly and place filter into position.
Cleaning the Rear Air Inlet Grille
Rear Air Inlet Grille Rear Air Inlet Grille
The rear air inlet grille should be checked and cleaned once every 2 weeks or more often if
necessary. A clogged air inlet grille will reduce cooling/heating efficiency.
1. Push the right and left sides of the grille with your thumb and lift it upward, then take it out.
2. Clean it with water, then use a dry cloth to wipe it.
3. Insert the upper portion of grille back into the unit, taking care that the left and right edges
line up correctly and place grille into position.

Malfunctions and Solutions
Stop the air conditioner immediately if one of the following faults occur. Disconnect the
power and contact the nearest customer service centre.
Any one of E1, E2, E3, E4, E5 and E6 displays on the indoor unit.
Fuse blows or circuit breaker trips frequently.
Other objects or water penetrate the air conditioner.
The remote controller won't work or works abnormally.
Other abnormal situations.
Trouble
Malfunctions
Unit does not
start
Unit not cooling
or heating
(Reverse cycle
models only)
room very well
while air flowing
out from the air
conditioner
Cause
Power cut
Unit may have become
unplugged.
Fuse may have blown.
Battery in Remote controller may
have been exhausted.
The time you have set with timer
is incorrect.
Wait for power to be restored.
Check that plug is securely in wall
receptacle.
Replace the fuse.
Replace the battery.
Wait or cancel timer setting.
Set temperature correctly. For detailed
method please refer to "Using remote
control" section.
Clean the air filter.
Close the doors or windows.
Clear obstructions away first, then
restart the unit.
Wait.
Inappropriate temperature
setting.
Air filter is blocked.
Doors or Windows are open.
Air inlet or outlet of indoor or
outdoor unit has been blocked.
Compressor 3 minutes
protection has been activated.
If the trouble has not been corrected, please contact a local dealer or the nearest
customer service centre. Be sure to inform them of the detailed malfunctions and unit
model.
Notes: Do not attempt to repair the unit yourself.
Always consult an authorised service provider.
What should be done?
13
Troubleshooting tips

CS369-U
2200019091