Midea Smart Kit User manual

USER MANUAL OF SMART KIT
IMPORTANT NOTE:
Read the manual carefully before installing or
connecting your Smart kit(Wireless module). Make
sure to save this manual for future reference.

CONTENTS
1
SPECIFICATION...........................................
INSTALL THE SMART KIT
(wireless module) ........................................
DOWNLOAD AND INSTALL APP.................
PREPARATION ............................................
CREATE ACCOUNT......................................
NETWORK CONFIGURATION.....................
HOW TO USE APP........................................
SPECIAL FUNCTIONS.................................
APP DECLARATION....................................
1
2
3
4
5
6
7
8
9
2
3
4
4
5
6
17
20
26
Please keep you APP up to date with the latest version.
Due to special situation may be occurred, we explicitly
claims below: Not all of the Android and i OS system
ar e compatible with APP. We will not be responsible
for any issue as a result of the incompatibility.
Wireless safety strategy
Smart kit only support WPA-PSK/WPA2-PSK
encryption and none encryption .
WPA-PSK/WPA2-PSK encryption is recommended.
PRECAUTIONS
Applicable system: iOS, Android.
(Suggest: iOS 8.0 or later, Android 4.0 or later)

2
1
SPECIFICATION
Standard: IEEE 802. 11b/g/n
Antenna Type: Printed PCB Antenna
Frequency Band: 2400-2483.5MHz
Operation Temperature:0 C~45 C/32 F~113 F
Operation Humidity: 10%~85%
Power Input: DC 5V/300mA
Maximum TX Power: 19.8dBm
Cautions
Due to different network situation, control process
may return time-out sometimes. If this situation
occurs, the display between board and App may not
be the same, please do not feel confused.
Smart Phone camera needs to be 5 million pixels o r
above to make sure scan QR code well.
Due to different network situation, sometimes,
request time-out could happen, thus, it is necessary
to do network configuration again.
Please Check The Service Website For More information.
The APP system is subject to update without prior notice for
product function improvement. The actual network configuration
process may be slightly different from the manual, the actual
process shall prevail.
Model: EU-SK103X, US-SK103X

3
KOODXXXXXXXXXXXX
2
INSTALL THE SMART KIT(wireless module)
1) Rem ove th e protective cap of the smart kit.
2) Open the front panel and insert the smart kit
into the reserved interface.
3) Attach the QR code packed with SMART KIT
to the side panel of the machine or other
convenient location, ensure it is covenience to
be scanned by the mobile phone.
Kindly reminder: It is better to reserve the other
two QR Code in a safe place or take a picture
and save it in your own phone.
WARNING: This interface is only compatible with
SMART KIT(Wireless module) provided by the
manufacturer.

4
Scan QR code to download the “ Midea Air ” APP
or get it fro m G oogle p lay an d app store by ma nu ally
searching.
CAUTION: The following QR Code is only available
for downloading APP. It is totally different with
the QR code packed with SMART KIT.
1) Please ensure your mobile device is connected
to Wifi router. Also, the Wifi router has already
conne cted to Internet before doing us er
registration and network configuration.
2) Mak sure your mobile device has already been
connected to the wifi network which you want to
use. Also, you need to forget other irrelevant wifi
network in case it influences your configuration
process.
3DOWNLOAD AND INSTALL APP
4PREPARATION
Android iOS

6
6NETWORK CONFIGURATION
Cautions
Kindly reminder:
Using Android device to do network configuration
It is necessary to forget any other around network and
make sure the Android or iOS device just connect to
the Wi-Fi network you want to configure.
Make sure the Android or iOS device Wi-Fi function
works well and can be connected back to your original
Wi-Fi network automatically.
connect to the Wi-Fi network which you want to use.
Also, you need to forget other irrelevant Wi-Fi network
in case it influences your configuration process.
press the “ LED DISPLAY” or “DO NOT DISTURB”
button seven times in 10 seconds.
User must finish all the steps in 8 minutes after powering on
AC, otherwise you need to power on it again.
1
2
2
3
4
Make sure your mobile device has already been
Disconnect the power supply of AC.
Connect the power supply of AC, and continuously
When the AC displays AP , it means that the AC Wi-Fi
has already entered into AP Mode.
'
'
'
'
Some type of AC do not need the step to be in AP
mode

16
NOTE:
When finishing network configuration, APP will
display success cue words on the screen.
Due to different internet environment, it is possible
that the device status still display “offline” . If this
situation occurs, it is necessary to pull and refresh
the device list on the APP and make sure the device
status become “online” . Alternatively, user can
turn off the AC power and turn on it again, the device
status will become “online” after few minutes.