Midea MJR001T User manual

Warning notices: Before using this product, please read this manual carefully and keep it for future reference.
The design and specifications are subject to change without prior notice for product improvement.
Consult with your dealer or manufacturer for details.
The diagram aboveis just for reference. Please take the appearance of the actual product as the standard.
MJR001T
USER MANUAL
Water Dispenser

THANK YOU LETTER
Thank you for choosing Midea! Before using your new Midea product, please read
this manual thoroughly to ensure that you know how to operate the features and
functions that your new appliance oers in a safe way.
CONTENTS
0
02
1
01
11
21
31
41
04
05
THANK YOU LETTER
SAFETY INSTRUCTIONS
SPECIFICATIONS
PRODUCT OVERVIEW
PRODUCT INSTALLATION
OPERATION INSTRUCTIONS
CLEANING AND MAINTENANCE
TROUBLESHOOTING
TRADEMARKS, COPYRIGHTS AND LEGAL STATEMENT
DISPOSAL AND RECYCLING
DATA PROTECTION NOTICE
07
08

Danger
This symbol indicates that there are dangers to the life and health of
persons due to extremely flammable gas.
Warning of electrical voltage
This symbol indicates that there is a danger to life and health of
persons due to voltage.
Warning
The signal word indicates a hazard with a medium level of risk which, if
not avoided, may result in death or serious injury.
Caution
The signal word indicates a hazard with a low degree of risk which, if
not avoided, may result in minor or moderate injury.
Attention
The signal word indicates important information (e.g. damage to
property), but not danger.
Observe instructions
This symbol indicates that a service technician should only operate and
maintain this appliance in accordance with the operating instructions.
The following safety guidelines are intended to prevent unforeseen risks or damage from
unsafe or incorrect operation of the appliance. Please check the packaging and appliance
on arrival to make sure everything is intact to ensure safe operation. If you find any
damage, please contact the retailer or dealer. Please note modifications or alterations to
the appliance are not allowed for your safety concern. Unintended use may cause
hazards and loss of warranty claims.
Read these operating instructions carefully and attentively before using/commissioning the
unit and keep them in the immediate vicinity of the installation site or unit for later use!
Intended Use
Explanation of Symbols
SAFETY INSTRUCTIONS
02

03
DANGER: Risk of Fire/Flammable materials
●
●
●
Do not store explosive substances such as aerosol cans with a flammable propellant in
this appliance.
The appliance must be disconnected from the main safter use and before user-per-
formable maintenance is carried out.
The following safety guidelines are intended to prevent unforeseen risks or damage
from unsafe or incorrect operation of the appliance. Please check the packaging and
appliance on arrival to make sure everything is intact to ensure safe operation. If you
find any damage, please contact the retailer or dealer. Please note modifications or
alterations to the appliance are not allowed for your safety concern. Unintended use
may cause hazards and loss of warranty claims.
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
CAUTION: Risk of injury!
WARNING
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
This appliance is intended to be used in household and similar applications such as:
sta kitchen areas in shops, oces and other working environments; farm houses and
by clients in hotels, motels and other residential type environments; bed and breakfast
type environments; catering and similar non-retail applications.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
This appliance is intended to be used by expert or trained users in shops, in light
industry and on farms, or for commercial use by lay persons.
The appliance is suitable for indoor use only.
WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in
structure, clear of obstruction.
WARNING: When positioning the appliance, ensure the supply cord is not trapped or
damaged.
WARNING: Do not locate multiple portable socket-outlets or portable power supplies
at the rear of the appliance.
The appliance must not be cleaned by a water jet.
The appliance must not be immersed.
This product is not recommended to use in areas above 1,500m altitude.
This machine is applicable to the water environment with TDS value less than 150 in
case of the high water hardness lead to incrustation even breakdown of the heater.
In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this
appliance must not be supplied through an external switching device, such as a timer,
or connected to a circuit that is regularly switched on and o by the utility.
It's normal when water flow shaking a little for air enter in especially in first use or
working without water .
Failure to comply with the safety information and instructions may result in injury.
Safety of children and persons with reduced abilities.

SPECIFICATIONS
04
MJR001TProduct Model
Rated Voltage
Rated Frequency
220-240V~
50/60Hz
20L/h(≥90°C)
3.0L
309x143x320mm
Rated power
Hot water capacity
Capacity
Product size
2100W
This appliance should work under environment of temprature from 10°C-43 °C
humidity ≤90%.

Product
PRODUCT OVERVIEW
05
Control Panel
Rotary Button
3. 0 L
MAX
2. 0 L
1. 0 L
MN I
Water Outlet
Light Indicator
Water drain
Water Tank Cover
Scale Label
Water Tank
Cable

Accessories
06
Instruction Manual x1 Warranty Card x1

07
PRODUCTINSTALLATION
GETTING STARTED
Fill in the water and plug the appliance into the main power outlet
Fill water volume between MIN and MAX level marked on the water tank. Plug the
appliance into a main power outlet. All the lights on the control panel will light up. The
room temperature sign will light on normally.
Use only fresh water at room temperature without any additive; otherwise this can
damage the appliance.
Note: Please ensure the water temperatures are more than 5°C when filling Attention:
Not suitable for dishwasher
3. 0 L
MA X
2. 0 L
1. 0 L
MN I
Unlock the appliance and dispense water
Turn the button to unlock the safety lock mode. The water dispense indicator light will
illuminate when dispensing water. The appliance will automatically go into safety lock
mode after 60 seconds if no function is selected on the appliance.

08
OPERATION INSTRUCTIONS
Operation Panel
Indicator Light
Indicator Light
●
No.1
Description
When this indicator light is on, the water tempera-
ture knob button is in the warm water position, and
the water from the faucet is at constant tempera-
ture.
●When this indicator light is on, the water tempera-
ture knob button is selected at the 45 ℃gear, and
the water outlet from the faucet is at 45 ℃.
●When this indicator light is on, the water tempera-
ture knob button is selected at the 55 ℃gear, and
the water outlet from the faucet is at 55 ℃.
●When this indicator light is on, the water tempera-
ture knob button is selected at the 65 ℃gear, and
the water outlet from the faucet is at 65 ℃.
●
●
When this indicator light is on, the water tempera-
ture knob button is selected at the 80 ℃gear, and
the water outlet from the faucet is at 80 ℃.
When this indicator light is on, the water tempera-
ture knob button is selected at the 90 ℃gear, and
the water outlet from the faucet is at 90 ℃.
●When this indicator light is on, the water tempera-
ture knob button is selected in the boiling water
position, and the water outlet from the faucet is
boiling water.
1 2 3 4 5 6 7
Indicator Light
No.2
No.3
No.4
No.5
No.6
No.7
45℃
Indicator Light
55℃
Indicator Light
65℃
Indicator Light
80℃
Indicator Light
90℃

09
OPERATION INSTRUCTIONS
Water dispensing
Tap the button, the water will flow out continuously from the water spout. Press the
Confirm button to stop the appliance immediately. Repeat if more hot water is required.
Water Flow:
Tap Once: 250ml Water
Tap 1.5 Sec, 1000ml Water
Notice: The appliance may take approximately 7 seconds to resume regular temperature
after being plugged in.
3.0 L
MAX
2. 0 L
1. 0 L
MNI
Dispensing Water
Turn the button to select the desired temperature. The water dispenses Indicator light
will illuminate when dispensing water.

10
CLEANING AND MAINTENANCE
1. Clean the water tank and spout
To maintain performance, it is recommended to descale the appliance at least twice a
month: use a toxic-free detergent such as citric acid or vinegar to the tank. Suggest
using 50g-100g citric acid with 2.5L water in the first time. Wait until the citric acid is
completely dissolved. Tap the button to empty the water tank. After that, fill in 2.5L
water, and wait for 5 minutes. Empty the water tank again. Repeat two or three times to
complete descaling. Drain boiled water and replace with clean water before operating
the appliance again.
3.0 L
MAX
2.0L
1.0 L
MNI
Citric acid
2. Refreshing the water
If the water is filling in the tank more than 48 hours, please refreshing the water
periodically.
3.0 L
MAX
2.0 L
1.0 L
MNI
3. Always disconnect the appliance from mains power when not in use
Turn the appliance (power) o if you are not going to use it for a long time. Please wait
for at least 3 minutes for reheating the water while plugging in the water dispenser.
Drain boiled water and replace with clean water before operating the appliance again.
4. Emptying the Water Drain
Remove the water tray by using one hand to stabilize the appliance and another to lift
the water drain slightly and remove it. Empty the water drain and replace it with medium
force. Clean up the water tray periodically to prevent germs and bacteria.
TIPS:
1. Do not drink the cleaning water.
2. Empty the water tank and pour out the water in the appliance while using the citric
acid to prevent from entering the pipeline and causing the product damage.
3. First usage: Fill in 3L Fresh water to the water tank. Turn the button to select the
desired temperature. Suggest turn the button from the highest level to the lowest level
once in sequence, and empty the water tank.

TROUBLESHOOTING
Please use this chart to troubleshoot common problems using instant hot water
dispenser
11
No water
Electric plug out of the socket.
Hall device abnormal
Check the water tank.
●
There is something between the
inlet water tank
●
No water or too little water in
the.water tank
●
●
Possible reason SolutionProblem
Panel light does
not shine
Panel does not
work
Display board failure Contact the company's
customer service department.
Contact the company's
customer service department.
Check the temperature.
Temperature failure
Not Heaing
All panel lights flash
Board failure
Heater over temperature
Heater blockage
There is something between the
inlet water tank
Water pump failure
Cleaned by citric acid.
Check the water tank.
●
●
●
Heater failure
●
●
●
Heater over temperature
●
●
●
Heater blockage
●
Board failure
●
Waiting for cold down.
●
●
●
●
●
●
Water pump failure
●
●
●
●
Thermostat failure
Panel does not work
The plug is not in place. Check the plug.
●●
Contact the company's
customer service department.
●
The room tempera-
ture light flashes,
the other lights o
Press the water button to
return to normal automatically.
Water flow
becomes smaller
Contact the company's
customer service department.
●
Contact the company's
customer service department.
●

EN
logo, word marks, trade name, trade dress and all versions thereof are
valuable assets of Midea Group and/or its aliates (“Midea”), to which Midea owns
trademarks, copyrights and other intellectual property rights, and all goodwill derived
from using any part of an Midea trademark. Use of Midea trademark for commercial
purposes without the prior written consent of Midea may constitute trademark
infringement or unfair competition in violation of relevant laws.
This manual is created by Midea and Midea reserves all copyrights thereof. No entity or
individual may use, duplicate, modify, distribute in whole or in part this manual, or
bundle or sell with other products without the prior written consent of Midea.
All the described functions and instructions were up to date at the time of printing this
manual. However, the actual product may vary due to improved functions and designs.
TRADEMARKS, COPYRIGHTS
AND LEGAL STATEMENT
12

13
EN
DISPOSAL AND RECYCLING
Important instructions for environment
Compliance with the WEEE Directive and Disposing of the Waster Product:
This product complies with EU WEEE Directive (2012/19/EU). This product bears a
classification symbol for waster electrical and electronic equipment (WEEE).
This symbol indicates that this product shall not be disposed
with other household wastes at the end of its service life. Used
device must be returned to ocial collection point for
recycling of electrical electronic devices. To find these
collection systems please contact to your local authorities or
retailer where the product was purchased. Each household
performs important role in recovering and recycling of old
appliance. Appropriate disposal of used appliance helps
prevent potential negative consequences for the environment
and human health.
Compliance with RoHS Directive
The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does
not contain harmful and prohibited materials specified in the Directive.
Package information
Packaging materials of the product are manufactured from
recyclable materials in accordance with our National Environ-
ment Regulations. Do not dispose of the packaging materials
together with the domestic or other wastes. Take them to the
packaging material collection points designated by the local
authorities.

14
EN
DATA PROTECTION NOTICE
For the provision of the services agreed with the customer,
we agree to comply without restriction with all stipulations of applicable data protection
law, in line with agreed countries within which services to the customer will be delivered,
as well as, where applicable, the EU General Data Protection Regulation (GDPR).
Generally, our data processing is to fulfil our obligation under contract with you and for
product safety reasons, to safeguard your rights in connection with warranty and
product registration questions. In some cases, but only if appropriate data protection is
ensured, personal data might be transferred to recipients located outside of the
European Economic Area.
Further information are provided on request. You can contact our Data Protection
Ocer via [email protected]. To exercise your rights such as right to object your
personal date being processed for direct marketing purposes, please contact us via
[email protected]. To find further information, please follow the QR Code.

EN