Miele H 6560 B User manual

Installation Instructions
+%HQ&$



,QVWDOODWLRQUHSDLUDQGPDLQWHQDQFHZRUNVKRXOGEHSHUIRUPHGE\
D0LHOHDXWKRUL]HGVHUYLFHWHFKQLFLDQLQDFFRUGDQFHZLWKQDWLRQDO
DQGORFDOVDIHW\UHJXODWLRQVDQGWKHSURYLGHGLQVWDOODWLRQLQVWUXFWLRQV

Electrical connection
95
ĜCAUTION:
Before servicing, disconnect the
power supply by either removing the
fuse, shutting off the power main or
manually "tripping" the circuit
breaker.
Installation, repair and maintenance
work must be performed by a Miele
authorized service technician. Work
by unqualified persons could be
dangerous and may void the
warranty.
Before connecting the appliance to
the power supply, make sure that the
voltage and frequency listed on the
data plate correspond with the
household electrical supply. This
data must correspond to prevent
machine damage. Consult an
electrician if in doubt.
Only operate the appliance after it
has been installed into cabinetry.
The plug must be plugged into an
appropriate outlet that is installed
and grounded in accordance with all
local codes and ordinances.
WARNING: THIS APPLIANCE MUST
BE GROUNDED
Installer: Please leave these
instructions with the consumer.
Electrical connection
The oven is equipped with a power
cord approx. 7' 2" (2.2 m) in length with
a NEMA 14-30 P plug ready for
connection to the power supply:
– 120/208 V, 20 A, 60 Hz
or
– 120/240 V, 20 A, 60 Hz
The voltage can be adjusted (see
"Settings - Electrical Version").
SAVE THESE INSTRUCTIONS FOR
THE ELECTRICAL INSPECTOR'S
USE.
NEMA 14-30P, L1, L2, N, G, 20 amp
208/240VAC

Installation diagrams
96
Appliance and cut-out dimensions
Miele ovens can be installed flush or proud. Discuss your installation
requirements with your architect, designer and installer.
Undercounter installation
BB
7/8"
(22*/23** mm) 16"
(407 mm)
(510 mm)
21 1/2"
(546 mm)
23 7/16"
(595 mm)
23 7/16"
(596 mm)
AA
20 1/16"
22 1/16"
(560 mm)
4"
(100 mm)
23 5/8"
(600 mm)
21 5/8"
( 550 mm)
22 11/16"
(577 mm)
22 5/8"
(575 mm)
ǞCut-out (4" x 22" / 100 mm x 560 mm) in the bottom of the cabinet for power
cord and ventilation
ǟPower cord with plug
*Oven with glass front
** Oven with metal front
Front design may vary depending on model. For the more current specifications
please visit the Miele website.

Installation diagrams
97
Installation into a tall cabinet
BB
7/8"
(22*/23** mm) 16"
(407 mm)
(510 mm)
21 1/2"
(546 mm)
23 7/16"
(595 mm)
23 7/16"
(596 mm)
20 1/16"
22 11/16"
(577 mm)
22 5/8"
(575 mm)
AA
22 1/16"
(560 mm)
4"
(100 mm)
23 5/8"
(600 mm)
21 5/8"
( 550 mm)
ǞCut-out (4" x 22" / 100 mm x 560 mm) in the bottom of the cabinet for power
cord and ventilation
ǟPower cord with plug
*Oven with glass front
** Oven with metal front
Front design may vary depending on model. For the more current specifications
please visit the Miele website.

Installation diagrams
98
Front dimensions
- 1/16"
(-2 mm)
B
22 5/8"
(575 mm)
A
4 3/8" (111 mm)
3/16"
(4 mm)
18 5/8"
(473 mm)
23 5/16"
(592 mm)
23 7/16"
(596 mm)
AH65xx: 2.75" (69 mm)
BOven with glass front: .08" (2.2 mm)
Oven with metal front: .05" (1.2 mm)

Installing the oven
99
ĜThe oven must not be operated
until it has been properly installed
within cabinetry.
In order for the oven to function
correctly, it required an adequate
supply of cool air. Ensure that the air
flow is not impaired (e.g. insulation in
the cabinetry). Also be sure that the
cool air supply is not heated by other
sources nearby.
Before installation
ĺBefore connecting the oven to the
power supply, first disconnect the
power supply from the oven isolator
switch.
Mounting the door handle
(depending on model)
ĺMount the handle onto the retaining
bolts.
ĺUse the supplied Allen wrench to
tighten all four bolts.
Installing the oven
ĺConnect the power cord to the
electrical supply.
Do not carry the oven by the door
handle. The door can be damaged.
Use the handles on each side of the
oven to carry it.
It is recommended that you remove
the door before installing the
appliance (see "Cleaning and Care -
Removing the door") and all oven
accessories from the cavity. This will
make for easier installation into the
niche and will not tempt you to use
the handle to carry it.
ĺIf there are side handles, please
remove them.
ĺPush the oven into the cabinetry and
align it.
ĺOpen the door (if it was not removed
previously).
ĺUse the supplied screws to secure
the oven to the side walls of the
cabinetry through the holes in the
trim.

Installing the oven
100
ĺReinstall the door, if necessary (see
"Cleaning and care - Installing the
door").

9 Independence Way
Princeton, NJ 08540
Phone:
Fax:
www.mieleusa.com
U.S.A.
Miele, Inc.
National Headquarters
Please have the model and serial number
of your appliance available before
contacting Technical Service.
Canada
Importer
Miele Limited
Headquarters and Miele Centre
800-843-7231
609-419-9898
609-419-4298
Technical Service & Support
Nationwide
Phone:
Fax:
T
[email protected]
161 Four Valley Drive
Vaughan, ON L4K 4V8
www.miele.ca
800-999-1360
888-586-8056
Customer Care Centre
Phone:
[email protected]
800-565-6435
905-532-2272
Germany
Manufacturer
Miele & Cie. KG
Carl-Miele-Straße 29
33332 Gütersloh
101

M.-Nr. 09 786 780 / 01en – US, CA
H6560B
