Miele SmartLine Tepan Yaki CS 7632 User manual

Operating and installation instructions
SmartLine Tepan Yaki
To avoid the risk of accidents or damage to the appliance it is essential
to read these instructions before it is installed and used for the first time.
en-GB M.-Nr. 10 803 080

Contents
2
Warning and Safety instructions.......................................................................... 4
Caring for the environment ................................................................................ 13
Guide to the appliance........................................................................................ 14
Tepan Yaki ............................................................................................................. 14
Controls / Indicators.............................................................................................. 15
Before using for the first time ............................................................................ 16
Cleaning the SmartLine element for the first time................................................. 16
Switching on the SmartLine element for the first time .......................................... 16
The induction principle ....................................................................................... 17
Setting ranges...................................................................................................... 18
Operation.............................................................................................................. 19
Using the appliance............................................................................................... 19
Setting the power level.......................................................................................... 20
Switching off.......................................................................................................... 20
Residual heat indicator.......................................................................................... 20
Setting the power level – extended setting range ................................................. 21
Switching the heating elements on together......................................................... 21
Tips........................................................................................................................ 22
Keeping warm ....................................................................................................... 22
Timer..................................................................................................................... 23
Minute minder ....................................................................................................... 23
Switching off the heating element/cooking zone automatically............................ 24
Additional functions ............................................................................................ 25
Stop&Go.............................................................................................................. 25
Recall..................................................................................................................... 25
Wipe protection ..................................................................................................... 26
Demonstration mode............................................................................................. 26
Displaying the SmartLine element data ................................................................ 26
Safety features..................................................................................................... 27
System lock / Safety lock...................................................................................... 27
Safety switch-off ................................................................................................... 29
Overheating protection.......................................................................................... 30
Programming ....................................................................................................... 31
Cleaning and care ............................................................................................... 34
Control panel......................................................................................................... 35

Contents
3
Frying surface........................................................................................................ 35
Problem solving guide ........................................................................................ 36
Optional accessories .......................................................................................... 39
Safety instructions for installation..................................................................... 40
Safety distances .................................................................................................. 41
Installation notes ................................................................................................. 44
Onset installation................................................................................................... 44
Installing several SmartLine elements................................................................... 46
Combination with a downdraft extractor............................................................... 46
Building-in dimensions ...................................................................................... 47
Onset installation................................................................................................... 47
Flush-fit installation ............................................................................................... 48
Worktop cut-out for onset installation .............................................................. 49
Worktop cut-out for flush-fit installation........................................................... 52
Spacer bars.......................................................................................................... 55
Installation............................................................................................................ 56
Preparing the worktop........................................................................................... 56
Fitting the spacer bars .......................................................................................... 56
Installing the SmartLine element ........................................................................... 57
Electrical connection .......................................................................................... 59
After sales service............................................................................................... 61
Contact in case of malfunction ............................................................................. 61
Data plate .............................................................................................................. 61
Warranty ................................................................................................................ 61

Warning and Safety instructions
4
This appliance complies with all relevant safety requirements. In-
appropriate use can, however, lead to personal injury and damage
to property.
To avoid the risk of accidents or damage to the appliance, please
read these instructions carefully before installation and before us-
ing it for the first time. They contain important notes on installa-
tion, safety, use and maintenance.
Miele cannot be held liable for damage caused by non-compliance
with these Warning and Safety instructions.
Keep these instructions in a safe place and ensure that new users
are familiar with the content. Pass them on to any future owner.

Warning and Safety instructions
5
Correct application
 This Tepan Yaki is intended for domestic use and use in other sim-
ilar environments.
 The appliance is not intended for outdoor use.
 It is intended for domestic use only to cook food and keep it
warm. Any other use is not supported by the manufacturer and could
be dangerous.
 People with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge who are not able to use the appli-
ance safely on their own must be supervised whilst using it. They
may only use it unsupervised if they have been shown how to use it
safely and recognise and understand the consequences of incorrect
operation.

Warning and Safety instructions
6
Safety with children
 Children under 8 years of age must be kept away from the appli-
ance unless they are constantly supervised.
 Children 8 years and older may only use the appliance unsuper-
vised if they have been shown how to use it in a safe way and can
recognise and understand the consequences of incorrect operation.
 Children must not be allowed to clean the appliance unsuper-
vised.
 Please supervise children in the vicinity of the appliance, and do
not let them play with it.
 The appliance gets hot when in use and remains hot for a while
after being switched off. Keep children well away from the appliance
until it has cooled down and there is no danger of burning.
 Danger of burning.
Do not store anything which might arouse a child's interest in stor-
age areas above or next to the appliance. Otherwise they could be
tempted into climbing onto the appliance.
 Danger of suffocation. Packaging, e.g. plastic wrappings, must be
kept out of the reach of babies and children. Whilst playing, children
could become entangled in packaging or pull it over their head and
suffocate.
 Activate the system lock to ensure that children cannot switch the
Tepan plate on by mistake. Use the safety lock when the Tepan plate
is in use to prevent children from altering the settings selected.

Warning and Safety instructions
7
Technical safety
 Unauthorised installation, maintenance and repairs can cause
considerable danger for the user. Installation, maintenance and re-
pairs must only be carried out by a Miele authorised technician.
 Do not use a damaged appliance. It could be dangerous. Check
the appliance for visible signs of damage.
 Reliable and safe operation of this appliance can only be assured
if it has been connected to the mains electricity supply.
 The electrical safety of this appliance can only be guaranteed
when correctly earthed. It is essential that this standard safety re-
quirement is met. If in any doubt please have the electrical installa-
tion tested by a qualified electrician.
 Before connecting the appliance to the mains supply, ensure that
the connection data on the data plate (voltage and frequency) match
the mains electricity supply.
This data must correspond in order to avoid the risk of damage to
the appliance. Consult a qualified electrician if in any doubt.
 Do not connect the appliance to the mains electrical supply by a
multi-socket adapter or extension lead. These are a fire hazard and
do not guarantee the required safety of the appliance.
 For safety reasons, this appliance may only be used when it has
been built in.
 The appliance must not be used in a non-stationary location (e.g.
on a ship).
 Never open the casing of the appliance.
Touching or tampering with electrical connections or components
and mechanical parts is highly dangerous to the user and can cause
operational faults.

Warning and Safety instructions
8
 While the appliance is under warranty repairs should only be un-
dertaken by a Miele authorised service technician. Otherwise the
warranty is invalidated.
 Miele can only guarantee the safety of the appliance when genu-
ine original Miele replacement parts are used. Faulty components
must only be replaced by Miele spare parts.
 The appliance is not intended for use with an external timer switch
or a remote control system.
 If the plug is removed from the connection cable or if the cable is
supplied without a plug, the appliance must be connected to the
electrical supply by a suitably qualified electrician.
 If the mains connection cable is damaged, it must be replaced
with a special connection cable by an electrician (see “Electrical
connection”).
 During installation, maintenance and repair work, the appliance
must be disconnected from the mains electricity supply.
 Danger of electric shock.
Do not use the appliance if it is faulty. Switch it off immediately, dis-
connect it from the mains electricity supply and contact Miele.
 If the appliance is installed behind a furniture panel (e.g. a door),
ensure that the door is never closed whilst the appliance is in use.
Heat and moisture can build up behind a closed furniture panel and
cause subsequent damage to the appliance, the housing unit and
the floor. Do not close the door until the residual heat indicators have
gone out.

Warning and Safety instructions
9
Correct use
 The appliance gets hot when in use and remains hot for a while
after being switched off. There is a danger of burning until the resid-
ual heat indicators go out.
 Due to the high temperatures radiated, objects left near the appli-
ance when it is in use could catch fire.
Do not use the appliance to heat up the room.
 Oil and fat can overheat and catch fire. Do not leave the appliance
unattended when cooking with oil and fat. If it does ignite do not at-
tempt to put the flames out with water.
Disconnect the appliance from the mains and use a suitable fire
blanket, saucepan lid, damp towel or similar to smother the flames.
 Flames could set the grease filters of a cooker hood on fire. Do
not flambé under a cooker hood.
 Spray canisters, aerosols and other inflammable substances can
ignite when heated. Therefore do not store such items or substances
in a drawer under the appliance. Cutlery inserts must be heat-resist-
ant.
 Do not heat up food in closed containers e.g. tins or sealed jars
on the appliance, as pressure can build up in the container, causing
it to explode.
 Do not cover the appliance, e.g. with cover, a cloth or protective
foil. The material could catch fire, shatter or melt if the appliance is
switched on by mistake or if residual heat is still present.
 When the appliance is switched on either deliberately or by mis-
take, or when there is residual heat present, there is the risk of any
metal items left on the appliance heating up, with the danger of
burning. Depending on the material, other items left on the appliance
could also melt or catch fire. Do not use the appliance as a resting
place. Switch the appliance off after use.

Warning and Safety instructions
10
 You could burn yourself on the hot appliance. Protect your hands
with heat-resistant pot holders or gloves when working with the hot
appliance. Do not let them get wet or damp, as this causes heat to
transfer through the material more quickly with the risk of scalding or
burning yourself.
 When using an electrical appliance, e.g. a hand-held food blender,
near the appliance, ensure that the cable of the electrical appliance
cannot come into contact with the hot appliance. The insulation on
the cable could become damaged.
 Placing hot pans on the sensors and indicators could damage the
electronics underneath. Do not place hot pans on the sensors or in-
dicators.
 Because induction heating works extremely quickly, the temperat-
ure could reach the ignition point of oils and fats within a very short
time. Do not leave the Tepan plate unattended whilst it is being used.
 For people fitted with a heart pacemaker: please note that the
area immediately surrounding the Tepan plate is electromagnetically
charged when it is switched on. It is very unlikely to affect a pace-
maker. However, if in any doubt, consult the manufacturer of the
pacemaker or your doctor.
 When switched on, the electromagnetic field of the Tepan plate
can impair the function of magnetisable objects. Do not leave credit
cards, digital storage devices, pocket calculators, etc, in the immedi-
ate vicinity of the Tepan plate.
 Metal utensils stored in a drawer under the Tepan plate can be-
come hot if the appliance is used intensively for a long time. Do not
store any metal items or utensils in a drawer directly under the Tepan
plate.

Warning and Safety instructions
11
 The Tepan plate is fitted with a cooling fan. If a drawer is fitted dir-
ectly underneath the appliance, ensure that there is sufficient space
between the drawer and its contents and the underside of the appli-
ance in order to ensure sufficient ventilation of the Tepan plate. Do
not store pointed or small items or paper in the drawer. They could
get in through the ventilation slots or be sucked into the casing by
the fan and damage the fan or impair cooling.
 The appliance becomes very hot. Do not use plastic utensils. Even
heat-resistant plastic utensils are unsuitable.

Warning and Safety instructions
12
Cleaning and care
 Do not use a steam cleaning appliance to clean this appliance.
The steam could reach electrical components and cause a short cir-
cuit.
 If the Tepan plate is built in over a pyrolytic oven, it should not be
used whilst the pyrolytic cleaning process is being carried out, as
this could trigger the overheating protection mechanism on the Te-
pan plate (see relevant section).

Caring for the environment
13
Disposal of the packing mater-
ial
The packaging is designed to protect
the appliance from damage during
transportation. The packaging materials
used are selected from materials which
are environmentally friendly for disposal
and should be recycled.
Recycling the packaging reduces the
use of raw materials in the manufactur-
ing process and also reduces the
amount of waste in landfill sites.
Disposing of your old appli-
ance
Electrical and electronic appliances of-
ten contain valuable materials. They
also contain specific materials, com-
pounds and components, which were
essential for their correct function and
safety. These could be hazardous to hu-
man health and to the environment if
disposed of with your domestic waste
or if handled incorrectly. Please do not,
therefore, dispose of your old appliance
with your household waste.
Please dispose of it at your local com-
munity waste collection / recycling
centre for electrical and electronic ap-
pliances, or contact your dealer or
Miele for advice. You are also respons-
ible (by law, depending on country) for
deleting any personal data that may be
stored on the appliance being disposed
of. Please ensure that your old appli-
ance poses no risk to children while be-
ing stored prior to disposal.

Guide to the appliance
14
Tepan Yaki
aRear cooking zone
bFront cooking zone
cControls / Indicators

Guide to the appliance
15
Controls / Indicators
Sensor controls
aSwitching the SmartLine element on/off
bStop&Go
cWipe protection
dSwitching the heating elements on together/separately
eActivating/deactivating the keeping warm function
fNumerical keybank
For setting power levels/minute minder and switch-off times
gHeating element selection, automatic switch-off
hMinute minder
Indicator lights
iHeating element allocation, automatic switch-off
jResidual heat
kTimer display
: to : Duration
 System lock/safety lock activated
 Demonstration mode activated

Before using for the first time
16
Please stick the extra data plate for
the appliance supplied with this doc-
umentation in the space provided in
the “After sales service” section of
this booklet.
Remove any protective wrapping and
stickers.
Cleaning the SmartLine ele-
ment for the first time
Wipe all surfaces with a damp cloth
and then dry them.
Switching on the SmartLine
element for the first time
The metal components have a protect-
ive coating. Smells and possibly some
vapours may occur when the SmartLine
element is used for the first time. The
heating of the induction coils also
causes odours in the first few hours of
operation. With each subsequent use,
the odour is reduced until it disappears
completely.
The smell and any vapours given off do
not indicate a faulty connection or ap-
pliance and they are not hazardous to
health.
Please note that the heating-up time
for induction hobs is much shorter
than on conventional hobs.

The induction principle
17
The Tepan plate is heated by induction.
An induction coil is located under the
Tepan plate. When the Tepan plate is
switched on, this coil creates a mag-
netic field which impacts directly on the
surface and heats it up.
When the Tepan plate is
switched on either deliberately or by
mistake, or when there is residual
heat present, there is a risk of any
metal items placed on the Tepan
plate heating up.
Danger of burning.
Do not use the Tepan plate as a rest-
ing place for anything else. Switch
the Tepan plate off after use with the
appropriate sensor control.

Setting ranges
18
Cooking process Setting range
Keeping cooked food warm 1–2
Gently cooking fruit, e.g. apple slices, peach halves, bananas,
etc.
3–4
Gently stir-frying vegetables, e.g. leeks, sliced mushrooms,
green/red peppers, onion rings, etc.
4–5
Gently frying eggs, fish, meat, sausages, escalopes, vegetables
bacon
5–6
Frying meat, fish, hash browns, potato cakes 6–8
Frying steak, pancakes, marinated meat 8–9
These settings should only be taken as a guide. Times will vary according to the
type, texture and thickness of the food being cooked.

Operation
19
Using the appliance
This SmartLine element is equipped
with electronic sensor controls which
react to finger contact. For safety reas-
ons, in order to switch the appliance on,
the On/Off sensor needs to be
touched for a little longer than the other
sensors.
Each time you touch a sensor, an aud-
ible tone sounds.
Only the printed On/Off symbol is
visible when the SmartLine element is
switched off. The other sensor controls
light up when the SmartLine element is
switched on.
Malfunction due to dirty and/or
covered sensor controls.
If the sensor controls are dirty or
covered this could cause them to fail
to react, to activate a function or
even to switch the appliance off
automatically (see “Safety switch-
off”). Placing hot pans on the sensor
controls/indicators can damage the
electronic unit underneath.
Keep the sensor controls and indic-
ators clean and do not place any-
thing on top of them. Do not place
hot pans on them.
The Tepan plate has two cooking zones
which can be switched on and regu-
lated independently of one another. The
entire area can be used when cooking
large quantities of food. For smaller
quantities, the front element can be
used to cook the food whilst the rear
element can be used to keep food
warm with the keeping warm func-
tion.

Operation
20
Fire hazard.
Do not leave the Tepan plate unat-
tended whilst it is being used.
Please note that the heating-up time
for induction hobs is much shorter
than on conventional hobs.
Switching on the Tepan plate
Touch the sensor control.
Further sensor controls will light up. If
no further entry is made, the Tepan
plate will switch itself off after a few
seconds for safety reasons.
Setting the power level
Touch the appropriate sensor control
on the respective numerical keybank
for the power level you want.
Switching off
To switch off a cooking zone, touch
the 0 sensor on the numerical key-
bank for that zone.
To switch off the Tepan plate and
thus both cooking zones, touch
the sensor control.
Residual heat indicator
If the SmartLine element is still hot, the
residual heat indicator will light up after
it has been switched off. Depending on
the temperature, a dot will appear
above power levels 1, 2 and 3.
The dots of the residual heat indicator
go out one after the other as the Smart-
Line element cools down. The last dot
only goes out when the SmartLine ele-
ment is safe to touch.
Danger of burning.
Do not touch the SmartLine element
whilst the residual heat indicators are
lit up.