Miele W 3035 Parts list manual

Product Dimensions
Large Capacity Washing Machine
Angled control
W3035 / W3037
2"
23 1/2"
33 3/8" - 34 1/8"
22 1/2"
D
W
E
3 3/4" - 4 1/2"
21 1/2"
Location Codes
D -
E -
W -
5 foot flexible drain hose connects
upper left rear.
120 Volt, 15 Amp 5 foot molded plug
power supply connects upper left rear
(NEMA5-15Configuration).
5 foot separate flexible hot and cold
water intake hoses connect upper left
rear. Notes
• All installations must be done in accordance with local codes
• See "Cut-out Dimensions" sheet for undercounter or built-in space requirements
• Remove transport struts in rear of machine before installation. NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 08262011

Product Dimensions
Large Capacity Washing Machines
Flat controls - Decor Unit
W3039i
2"
23 1/2"
33 3/8" - 34 1/8"
22 1/2"
5 7/8"
3 3/4" - 4 1/2"
1 1/2"
Decor White
D
W
E
Location Codes
D -
E -
W -
5 foot flexible drain hose connects
upper left rear.
120 Volt, 15 Amp 5 foot molded plug
power supply connects upper left rear
(NEMA5-15Configuration).
5 foot separate flexible hot and cold
water intake hoses connect upper left
rear. Notes
• All installations must be done in accordance with local codes
• See "Cut-out Dimensions" sheet for undercounter or built-in space requirements
• Remove transport struts in rear of machine before installation. NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 08262011

Cut-out Dimensions
Built-in Installations
Large Capacity Laundry Products
24"
See Notes
Water & Electrical
Connection
Location
C
32 3/8" - 35 1/4"
Location Codes
C - Cutout for Electric and Vent or Drain
pass-through. Adjust according to duct
or drain location.
Notes
• Needed depth will vary by model number:
W3033-W3035: 24" minimum
W3039i: 25" minimum
• Typically requires removal of unit's lid. Out of box unit height dimension withoutlid is 32 5/16" - 32 11/16".
NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 08262011

Product Dimensions
Laundry Stand
WTS410 - White Only
22"
11"
23 3/8"
Notes
• For use with both large and super
capacity washers or tumble dryers.
• All installations must be done in
accordnace with local codes NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 08262011

Product Dimensions
Stacked Washer & Dryer
Example Combination
W3037 + T8003
2"
D
W
E1
3 3/4" - 4 1/2"
23 1/2"
22 1/2"
66 3/8" - 67 1/8"
V
E2
Location Codes
D -
E1 -
E2 -
W -
5 foot flexible drain hose connects
upper left rear.
120 Volt, 15 Amp 5 foot molded plug
power supply connects upper left rear
(NEMA5-15Configuration).
208/240 Volt, 30Amp 5 foot molded
plug power supply connects upper
right rear (NEMA 14-30 Configuration).
5 foot separate flexible hot and cold
water intake hoses connect upper left
rear. Notes
• All installations must be done in accordance with local codes
• See "Cut-out Dimensions" sheet for undercounter or built-in space requirements
• Remove transport struts in rear of machine before installation.
• WTV 407 Stacking kit for W3033, T8003, T8013C
• WTV 410 Stacking kit for W3039i / T8019Ci
• WTV 419 Stacking kit for W3035 / T8005 NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 08262011