Milesight UI-5D42-CV User manual

PTZ Network Camera
User Manual
V2.08

Thank you for purchasing our product. If there is any questions or requests, please do not hesitate to
contact your dealer.
This manual is applicable to the Milesight H.265 Network Camera, series are shown as follows, except
where otherwise indicated.
This Manual explains how to use and manage Milesight network cameras on your network. Previous
experience of networking will be of use when using the products. Please read this manual carefully before
operation and retain it for future reference.
This manual may contain several technically incorrect places or printing errors, and the content is subject to
change without notice. The updates will be added into the new version of this manual. We will readily
improve or update the products or procedures described in the manual.
Copyright Statement
This manual may not be reproduced in any form or by any means to create any derivative such as
translation, transformation, or adaptation without the prior written permission of Milesight Technology Co.,
Ltd (Hereinafter referred to as Milesight).
Milesight reserves the right to change this manual and the specifications without prior notice. The latest
specifications and user documentation for all Milesight products are available on our official website
www.milesight.com
Industry Canada ICES-003 Compliance:
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
Milesight H.265 PTZ Network Camera
Type
Megapixel 2MP 4MP 5MP
(PoE) Speed Dome
Network Camera UI-2A42-(R)(P)CV - UI-5D42-(P)CV
12x Mini (PoE) PTZ
Bullet Network Camera UI-2A61-(R)E(P)CV UI-4C61-E(P)CV UI-5D61-E(P)CV
12x LPR Mini (PoE) PTZ
Bullet Network Camera UI-2A61-EL(P)CV - -

Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid danger or
property loss. The precaution measures are divided into “Warnings” and “Cautions”
Warnings: Serious injury or death may be caused if any of these warnings is neglected.
Cautions: Injury or equipment damage may be caused if any of these cautions are neglected.
Warnings: Please follow these safeguards to prevent
injury or death. Cautions: Please follow these safeguards to prevent potential injury or material damage.
Warnings
uThis installation must be conducted by a qualified service person and should strictly comply with
the electrical safety regulations of the local region;
uTo avoid risk of fire and electric shock, do keep the product away from rain and moisture before
installed;
uDo not touch components such as heat sinks, power regulators, and processors, which may be hot;
uSource with DC 12V or AC 24V;
uPlease make sure the plug is firmly inserted into the power socket;
uWhen the product is installed on a wall or ceiling, the device should be firmly fixed;
uIf the product does not work properly, please contact your dealer. Never attempt to disassemble
the camera by yourself.
Cautions
uMake sure that the power supply voltage is correct before using the camera;
uDo not store or install the device in extremely hot or cold temperatures, as well as dusty or damp
locations, and do not expose it to high electromagnetic radiation;
uOnly use components and parts recommended by manufacturer;
uDo not drop the camera or subject it to physical shock;
uTo prevent heat accumulation, do not block air circulation around the camera;
uLaser beams may damage image sensors. The surface of image sensors should not be exposed to
where a laser beam equipment is used;
uUse a blower to remove dust from the lens cover;
uUse a soft, dry cloth to clean the surface of the camera. Stubborn stains can be removed using a
soft cloth dampened with a small quantity of detergent solution, then wipe dry;
uDo not use volatile solvents such as alcohol, benzene or thinners as they may damage the surface
finishes;
uSave the package to ensure availability of shipping containers for future transportation.

EU Conformity Statement
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as
unsorted municipal waste in the European Union. For proper recycling, return this product
to your local supplier upon the purchase of equivalent new equipment, or dispose of it at
designated collection points. For more information see: www.recyclethis.info.
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of
as unsorted municipal waste in the European Union. See the product documentation for
specific battery information. The battery is marked with this symbol, which may include
lettering to indicate cadmium (Cd), lead (Pb), or mercury(Hg). For proper recycling, return
the battery to your supplier or to a designated collection point. For more information see:
www.recyclethis.info.

Table of Contents
Chapter I Product Description.......................................................................................................................1
1.1Product Overview............................................................................................................................1
1.2KeyFeatures....................................................................................................................................1
1.3Hardware Overview.........................................................................................................................2
1.4SystemRequirements......................................................................................................................4
Chapter II NetworkConnection.....................................................................................................................5
2.1SettingtheCameraovertheLAN.....................................................................................................5
2.1.1 Connect the Camera to the PC Directly..................................................................................5
2.1.2Connectvia aSwitchor a Router............................................................................................5
2.2DynamicIP Connection....................................................................................................................6
Chapter III Accessing the NetworkCamera....................................................................................................6
3.1Assigning An IP Address...................................................................................................................7
3.1.1 Assigning An IP Address Using Smart Tools.............................................................................7
3.1.2 AssignAn IP Addressvia Browser.........................................................................................11
3.2Accessing from the Web Browser...................................................................................................13
3.3AccessingfromMilesightVMS(VideoManagementSoftware).......................................................15
Chapter IVSystemOperationGuide............................................................................................................16
4.1LiveVideo......................................................................................................................................16
4.1.1Operationson LiveView Page..............................................................................................16
4.1.2 3D Positioning ..........................................................................Error! Bookmarknot defined.
4.1.3 Set/ Call apreset/ Patrol /Pattern......................................................................................19
4.2Playback........................................................................................................................................23
4.3Local Settings.................................................................................................................................25
4.4BasicSettings.................................................................................................................................25
4.4.1 Video ..................................................................................................................................25
4.4.2Image..................................................................................................................................27
4.4.3Audio...................................................................................................................................35
4.4.4Network..............................................................................................................................37
4.4.5Date&Time..........................................................................................................................47
4.5Advanced Settings..........................................................................................................................48
4.5.1Alarm..................................................................................................................................48
4.5.2Storage................................................................................................................................56
4.5.3Security...............................................................................................................................60
4.5.4SIP.......................................................................................................................................62
4.5.5SmartEvent.........................................................................................................................63
4.5.6PTZ......................................................................................................................................70
4.5.7Logs.....................................................................................................................................76
4.6System...........................................................................................................................................77
4.7Maintenance.................................................................................................................................79
Chapter VServices......................................................................................................................................81

1
Chapter I Product Description
1.1 Product Overview
Milesight provides a consistent range of cost-effective and reliable network cameras to fully meet your
requirements. Based on embedded Linux operating system, Milesight network cameras could be easily
accessed and managed either locally or remotely with great reliability. With built-in high-performance
DSP video processing modules, the cameras pride on low power consumption and high stability. They
support state-of-the-art H.265/ H.264/ MJPEG video compression algorithm and industry-leading HD
dual-stream technology to achieve the highest level of video image quality under the limited network
resources. It is fully functional, supporting for flexible and comprehensive alarm linkage mechanism, day
and night auto switch, smart PTZ control and privacy masking, etc.
In practical applications, Milesight network cameras could either work independently in the LAN, or be
networked to form a powerful safety monitoring system. It is widely used in fields such as finance,
education, industrial production, civil defense, health care for security’s sake.
1.2 Key Features
²Up to 30x Optical Zoom for Speed Dome, 12x Optical Zoom for Mini (PoE) PTZ Bullet
²360° continuous pan and 0°~ 90° auto flip tilt for (PoE) Speed Dome
²360° continuous pan and -45°~30° tilt for Mini (PoE) PTZ Bullet
²255 Preset Points and 8 Patrols
²Based on Linux OS with high reliability
²H.265/ H.264/ MJPEG video compression capability
²Support Smart Stream
²Support ONVIF Profile S & G
²Support Primary Stream/ Secondary Stream/ Tertiary Stream
²ICR filter with auto switch, true day/night
²Built-in WEB server, support IE/ Firefox/ Chrome/ Safari browser
²UPnP protocol for the easy management of IPC
²Support Milesight DDNS
²3D Positioning, PTZ Motion, PTZ Limit, Scheduled Tasks and Auto Home function
²White LED for Mini (PoE) PTZ Bullet
²Motion Detection, Privacy Masking, Network Fault Detection and ROI
²FTP upload, SMTP upload, SD card record and SIP function
²G.711/AAC audio compression capability
²Audio Input/Output
²Three-privilege levels of users for flexible management
²Micro SD/SDHC/SDXC card local storage support, expand the edge storage
²Local PAL/NTSC signal output

2
1.3 Hardware Overview
1. (PoE) Speed Dome Network Camera
Figure1-3-1 (PoE) Speed Dome Network Camera
Note:
1) AC24V and PoEare availablefor power supply.
2) Built-in SD cardslot can be seen after removing the4 screws and open thefront panel.

3
2. 12x Mini PoE PTZ Bullet Network Camera
WallMount: PedestalMount:
MiniPTZBullet: MiniPoEPTZBullet:
Figure 1-3-2 12x Mini PoEPTZ Bullet Network Camera
Note:
1) Reset Button:Press“Reset” buttonfor 5 seconds, then thedevice will be restored to factory default.
2) Only DC 12V is available for Mini PTZ Bullet power supply. DC 12V and PoE (802.3at) are available for Mini PoE PTZ
Bullet power supply.

4
1.4 System Requirements
Operating System: Windows XP/Vista/7/8/10/Server 2000/Server 2008
CPU: 1.66GHz or higher
RAM: 1G or higher
Graphic memory: 128MB or more
Internet protocol: TCP/IP (IPv4/IPv6)
Web Browsers: Internet Explorer 8.0 and above version, Mozilla Firefox, Google Chrome and Safari.

5
Chapter II Network Connection
2.1 Setting the Camera over the LAN
Connecting the camera to a switch or a router is the most common connection method. The camera must
be assigned an IP address that is compatible with its LAN.
2.1.1 Connect the Camera to the PC Directly
In this method, only when the computer connected to a camera, it will be able to view the camera. The
camera must be assigned a compatible IP address to the computer. Details are shown as the following
figure.
Figure2-1-1 Connect the camera to the PC directly
2.1.2 Connect via a Switch or a Router
Set network camera over the LAN via the switch or router as figure 2-1-2:
Figure2-1-2 Connect viaaswitchoraRouter

6
2.2 Dynamic IP Connection
uConnecting the network camera via a router
Step1: Connect the network camera to a router;
Step2: On the camera, assign a LAN IP address, a Subnet mask and a Gateway;
Step3: On the router, set port forwarding. E.g. 80, 8000 and 554 ports. The steps for port forwarding vary
depending on different routers. Please look up the router's user manual for assistance with port
forwarding;
Step4: Apply a domain name from a domain name provider;
Step5: Configure the DDNS settings in the setting interface of the router;
Step6: Visit the camera via the domain name.
Figure2-2 Connect the network camera via a routerusingdynamic IP

7
Chapter III Accessing the Network Camera
The camera must be assigned an IP address to be accessible.
3.1 Assigning An IP Address
The Network Camera must be assigned an IP address to be accessible. The default IP address of Milesight
Network Camera is 192.168.5.190. The default user name is “admin”, and password is “ms1234”.
You can either change the IP address of the camera via SmartTools or browser. Please connect the camera
in the same LAN of your computer.
3.1.1 Assigning An IP AddressUsing Smart Tools
Smart Tools is a software tool which can automatically detect multiple online Milesight network cameras in
the LAN, set IP addresses, and manage firmware upgrades. It’s recommended to use when assigning IP
addresses for multiple cameras.
Step1: Install Smart Tools (The software could be downloaded from our website);
Step2: Start Smart Tools, click the IPC Tools page, then enter the device information, such as IP address,
MAC address, Port number, Netmask, and Gateway, then all related Milesight network cameras in
the same network that will be displayed. Details are shown as Figure 3-1-1;
Figure 3-1-1 Smart Tools

8
Step3: Select a camera or multiple cameras according to the MAC addresses;
Figure3-1-2 Select single camera
Figure3-1-3 Select multiplecameras

9
Step4: Type the User Name and Password (admin/ms1234 for default, please change your password for
yourdevice security);
Figure 3-1-4 Type the User Name and Password
Step5: Change the IP address or other network values, and then click “Modify” button;
Figure 3-1-5 Modify

10
Step6: Change the IP address successfully;
Figure 3-1-6 Change IP address successfully
Step7: By double clicking the selected camera or the browser of interested camera, you can access the
camera via web browser directly. The Internet Explorer window will pop up.
Figure3-1-7 Login interface
More usage of Smart Tools, please refer to the Smart Tools User Manual.

11
3.1.2 Assign an IP Address via Browser
If the network segmentof the computer and that ofthe camera are different, please follow the steps to
change the IP address:
Step1: Change the IP address of computer to 192.168.5.0 segment, here are two ways as below:
a.StartàControl PanelàNetwork and Internet ConnectionàNetwork ConnectionàLocal Area
Connection, and double click it. (Refer to Figure 3-1-8);
Figure3-1-8 Setting Network Segment IP Address of Computer
b. Click “Advanced”, and then click “IP settings” à“IP address” à“Add” (See Figure 3-1-9). In
the pop-up window, enter an IP address that in the same segment with Milesight network
camera ( e.g. 192.168.5.61, but please note that this IP address shall not conflict with the IP
address on the existing network);

12
Figure 3-1-9 Setting IP Address of Computer
Step2: Start the browser. In the address bar, enter the default IP address of the camera:
http://192.168.5.190;
Step3: Enter the user name and password when the LOGIN page appears;
Default user name: admin
Default password: ms1234
Figure 3-1-10 Login
Step4: After login, please select “Configuration”à“Basic Settings”à“Network”à“TCP/IP”. The Network
Settings page appears (Shown as below Figure);
Figure 3-1-11 IP Address of Camera
Step5: Change the IP address or other network values. Then click “Save” button;
Step6: The change of default IP address is completed.

13
3.2 Accessing from the Web Browser
The camera can be used with the most standard operating systems and browsers. The recommended
browsers are Internet Explorer, Firefox, Chrome, Safari.
Access over IE Browser
Before using the browser toget access to your camera,you need to install the MsActiveX firstly. You can
refer the steps as follows:
Step1: Launch the IE browser and enter the IP address of the camera;
Step2: Enter the User Name and Password and click “Login”;
(The default user name is “admin”, password is “ms1234”)
Step3: At the first time to log in the device, the browser will prompt to install Controls, please click “Click
here to download and install controls manually” as Figure 3-2-1;
Figure 3-2-1 To download and installcontrols
Note：During installing thecontrols, pleasekeep the browsers close.
Step4: Follow the prompts to install the Controls, when it`s finished, it will pop out a window as Figure
3-2-2. Please click “Finish” and refresh the browser, then you will see the video.
Figure3-2-2 Finishinstallation
If IE9 or higher version browser is used, it is suggested that the Milesight camera web link should be added
as a trusted site. See the instructions as follows:
Step1: Start the IE9 or higher version browser, and select “Tools”à“Internet Options”;
Figure 3-2-3 To add the permission

14
Step2: Select “Security” to “Trusted”;
Figure3-2-4 To trust thecontrol
Step3: Enter the IP address of the camera in the blank and click “Add”;
Figure 3-2-5 Add the website to the zone
Step4: Enter the IP address. After logging on network camera’s web GUI successfully, user is allowed to view
live video as follows.
Figure 3-2-6 Live View Interface

15
3.3 Accessing from Milesight VMS (Video Management Software)
Milesight VMS(ONVIF compatible) is a handy and reliable application designed to work with network
cameras in order to provide video surveillance, recording settings and event management functions. The
interface of MilesightVMS is very easy to use, intuitive, with easy access to the most common activities,
such as viewing live video, searching through recordings and exporting videos and snapshots. It's able to be
integrated with other devices through ONVIF. Itis designed to work on Windows XP/ 7/ 8/ Vista/ Server
2000/ Server 2008. The software could be downloaded from our website www.milesight.com.
Please install Milesight VMS; then launch the program to add the camera to the channel list. For detailed
information about how to use the software, please refer to user manual of Milesight VMS.
Figure 3-3-1 Milesight VMS Live View