MILL IB250 User guide

EN
DE
SLO
EE
IT
FR
CZ
HR
LV
SK
LT
NL PL
Assembly and instruction manual
Series:
Invisible &
Glass panel
heater
Please read the instructions carefully before use.
Take good care of this manual for later use.

Scandinavian
home comfort
Mill is a Norwegian brand that develops heating and indoor
air quality products tailored for your modern home. Inspired
by Scandinavian nature, our products are designed to sustain
the toughest of climates to ensure safe, efficient and com-
fortable temperatures, as well as good air quality.
Mill products are praised for their minimalistic and elegant
features as they blend in naturally with any modern interior.
Our advanced and user-friendly technology will support a
relaxing and healthy home space with reliable temperatures
and air quality. Mill’s vision is to develop products that create
an enjoyable and harmonic household atmosphere, enhan-
cing both comfort and style; the ultimate Scandinavian home
comfort.
We hope you enjoy your Mill product.
Follow us on social media:
fb.com/millnorway
@millnorway
millnorway.com

1
EN
Content
24
4
5
5
5
5
6
6
6
6
6
7
7
7
7
8
8
8
9
9
11
11
11
11
11
11
12
12
12
Important safety information
Specifications
Before first use
First use
Minimum distances
Description of heater
Assembly
Temperature calibration
Resetting the heater
Memory function
“Open window” function
Instructions electronic thermostat
Power indicator for electronic thermostat
Set desired temperature for electronic thermostat
Instructions day/night thermostat
Power indicator day/night thermostat
Set desired temperature for day/night thermostat
Day- and nighttime setback
How to activate daytime setback
How to activate nighttime setback
Change setback temperature — daytime
Change setback temperature — nighttime
Change number of hours — daytime
Change number of hours — nighttime
Cancel (skip) setback period
Delete setback program
Maintenance
Warranty
Waste disposal
Please read the instructions carefully before use.
Take good care of this manual for later use.
STORE THIS INSTRUCTION MANUAL
FOR FUTURE USE!
NEVER TOUCH YOUR HEATER OR ITS
CASING WITH WET HANDS!
IN ORDER TO AVOID OVERHEATING,
DO NOT COVER THE HEATER.

2millnorway.com
EN
Important safety information
You must obey common safety guidelines when using
electrical products, especially in the presence of chil-
dren.
WARNING! To avoid electric shock or damage due
to the heat, always make sure the plug is pulled out
before the heater is moved or cleaned.
READ THE INSTRUCTIONS CAREFULLY
• The product is intended for home use only.
• Make sure the heater is connected to the house’s regular
mains as indicated on the heater.
• New heaters will produce a specific odor when used the
first time. This will stop after a short time and is completely
harmless.
• Check for any pieces of packing foam or cardboard that
may have fallen into the heating elements of the heater.
These pieces must be removed to avoid unpleasant odors.
• Prevent the heater from overheating -do not cover.
• Always turn off the heater and unplug it when not used for a
long period of time.
• Pay special attention if the heater is used in rooms where
children, the handicapped or elderly reside.
• The heater should not be set up directly beneath an electri-
cal socket outlet.
• The cord must not be laid under any kind of carpet. Make
sure the cord is laid in such a way that nobody can trip on it.
• The heater must not be used if either the cord or plug
is damaged. The heater must not be used if it has been

3
EN
dropped on the floor is damaged in any other way causing
it to malfunction.
• The cord must be repaired by the manufacturer or by an ex-
pert if it has been damaged, to avoid dangerous situations.
• Avoid using extension cords, which may overheat and
could possibly start a fire.
• Never cover the air vents on the heater. Avoid potential fire
hazards by making sure the air intakes are not blocked or
covered. The heater should be used in rooms with normal
flat floors.
• The heater should not be installed in close proximity to
flammable materials of any kind because there can always
be a risk of fire. The heater must never be used in rooms
where gasoline, paint or other flammable liquids are stored,
such as in a garage.
• Never touch an electric heater with wet hands. The heater
should be installed so a person showering or taking a bath
cannot come into direct contact with it.
• Some parts of this product can become very hot and cause
burns. Particular attention has to be given where children
and vulnerable people are present.
• The heater must be switched off, the plug removed and the
heater must cool down before it is moved.
• Avoid overloading the mains (the circuit) where the heater
is connected. The heater may overload the electrical circuit
if other electrical devices are plugged into the same socket
outlet.
• Do not use this heater in small rooms when they are occu-
pied by persons not capable to leaving the room on their
own, unless constant supervision is provided.

4millnorway.com
EN
• The product cannot be used by children under 8 years of
age and persons with reduced physical or mental abilities
or lack of experience and knowledge unless they have
been given supervision or instruction in the safe use of the
product and understand the hazards involved.
• Children should not play with the product. Cleaning and
maintenance should not be done by unsupervised children.
• Children under the age of 3 should be kept away from the
product, unless they are under constant supervision.
• Children aged 3 to 8 years are only permitted to turn the
product ON/OFF, assuming the heater is mounted accord-
ing to the assembly instructions and the children have
received instruction or supervision in the safe use of the
product and understand the hazards involved.
• Do not use this heater in the immediate surroundings of a
bath, a shower or a swimming pool.
WARNING! The heater must not be used if the glass panels
are damaged (this applies to the products with model names
starting with MB).
Specifications
Model Thermostat Color Height Width Amperage Power (W) IP rating
IB250 Electronic White 30.0 cm 35.0 cm 220240V~, 5060Hz 250 IPx4
IB600DN Day/Night White 40.0 cm 65.0 cm 220240V~, 5060Hz 600 IPx4
IB900DN Day/Night White 40.0 cm 85.0 cm 220240V~, 5060Hz 900 IPx4
IB1200DN Day/Night White 40.0 cm 105.0 cm 220240V~, 5060Hz 1200 IPx4
IB800L DN Day/Night White 25.0 cm 105.0 cm 220240V~, 5060Hz 800 IPx4
IB1000L DN Day/Night White 25.0 cm 121.5 cm 220240V~, 5060Hz 1000 IPx4
MB250 Electronic White 30.0 cm 36.5 cm 220240V~, 5060Hz 250 IPx4
MB600DN Day/Night White 40.0 cm 66.5 cm 220240V~, 5060Hz 600 IPx4
MB900DN Day/Night White 40.0 cm 86.5 cm 220240V~, 5060Hz 900 IPx4
MB1200DN Day/Night White 40.0 cm 106.5 cm 220240V~, 5060Hz 1200 IPx4
MB800L DN Day/Night White 25.0 cm 106.5 cm 220240V~, 5060Hz 800 IPx4
MB1000L DN Den /noc White 25.0 cm 123.0 cm 220240V~, 5060Hz 1000 IPx4
The heater is approved for use in bathrooms zone 2 {IPX4 approved)

5
EN
Before first use
After unpacking the heater, check to make sure the product was not damaged during
transport. Contact the retailer or importer if you discover any visible damages to the
product.
Keep the outer packaging to transport the heater in the future. If you want to dispose the
packaging, make sure it is done properly. Keep plastic bags away from children.
First use
After turning on the heater for the first time or after an extende the heater can produce a
burnt odor for a short time. This is normal. Please read all the instructions carefully before
use. Save the instruction manual for future use.
It is also normal for the heater to make “sounds” when it warms up or cools down.
Minimum distances
100 mm
50 mm50 mm
100 mm
100 mm in front
of heater
Description of heater
See figure 1 on separate illustration sheet
A MILL INVISIBLE
1. On/Off
2. Wall bracket
3. Temperature sensor
4. Heat emission
5. Thermostat
6. Steel front
B MILL GLASS
1. On/Off
2. Wall bracket
3. Temperature sensor
4. Heat emission
5. Thermostat
6. Glass front

6millnorway.com
EN
Assembly
See figure 2 on separate illustration sheet
A. Drill holes in the wall for holes 1 & 2. Then drill holes in the wall for the topmost holes
(holes 3 & 4 by using 6).
B. Insert the wall plugs into the drilled holes and attach the bracket with 4 screws.
C. Place the heater on the lower lugs on the bracket, then hang the heater on the
upper lugs (lift the heater slightly to align the heater with for the upper lugs). Screw in
the locking screws on the top of the bracket (clockwise).
ATTENTION! HORIZONTAL PLACEMENT ONLY
Temperature calibration
See figure 3 on separate illustration sheet
It may occur deviation between the temperature registered by the heater and the actual
temperature in the room. This can be caused by several reasons, however, the most com-
mon is that the heater is placed in a fair distance from where you usually reside. When you
set the temperature to for example 22 degrees, it is only natural that you expect the same
temperature where your sofa is placed for instance. However, the temperature sensor is
placed on the product itself, and therefore a deviation in temperature may occur. To adjust
this, all Mill heaters are equipped with a calibration function, which enables you to adjust
the temperature registered by the heater. N.B! The room must have achieved a stable
temperature before any calibration.
Press ○2 times and use + or - to set the actual temperature observed in the room. Con-
firm with○or wait 15 seconds for automatic confirmation.
Resetting the heater
See figure 4 on separate illustration sheet
Turn off the heater‘s main switch. Press and hold (9 while you turn on the heater‘s main
switch.
Memory function
The heater remembers all the temperature settings and will automatically return to the
desired temperature after a power cut. Your day- and nighttime setbacks will however be
deleted after a power cut, and you will need to register the programs again.
“Open window” function
The heater has an “open window” function that is activated instantly when it registers a
sudden drop in temperature with more than 2 degrees Celsius in 2 minutes. The heater will
automatically stop heating and FO will be visible in the display of the heater.
The heater will automatically start heating again after 10 minutes (the display switch from
FO to desired room temperature).

7
EN
Instructions electronic thermostat
Please see table on page 4 for which models that have electronic thermostats
Control panel
See figure 5 on separate illustration sheet
1. Display (shows the desired room temperature by default)
2. Power indicator - shows whether the heater is using power or not
3. Control button ( +) (increase temperature)
4. Control button (-) (reduce temperature)
5. Function button
ATTENTION! After a power cut the thermostat will return to the last registered
temperature
WARNING! BEFORE THE HEATER IS TURNED ON, IT MUST BE ATTACHED TO A WALL.
IF THE HEATER IS NOT INSTALLED CORRECTLY OR IS INSTALLED ASKEW, THIS MAY
CAUSE THE HEATER TO MALFUNCTION OR IN THE WORST CASE, BE DAMAGED.
If the temperature sensor is not functioning properly, you will see this symbol on the
display. Please contact the dealer or importer.
Power indicator for electronic thermostat
See figure 6 on separate illustration sheet
When the panel heater is using power (i.e. when it is heating), the power indicator is lit ϟ
Set desired temperature for electronic thermostat
See figure 7 on separate illustration sheet
Press the arrow buttons to set the desired temperature.
Instructions day/night thermostat
Please see table on page 4 for which models that have day- and night thermostats.
TIP! The thermostat can be used as a regular electronic thermostat (i.e. the heater will
maintain a constant temperature 24 hours a day). Please see the section instructions elec-
tronic thermostat for further information.

8millnorway.com
EN
Control panel
See figure 8 on separate illustration sheet
1. Display (shows the desired room temperature by default)
2. Control light — night function
3. Control light — day function
4. Power indicator — Shows whether the heater is using power or not
5. Control button ( +) (Increase temperature)
6. Control button (-) (Reduce temperature)
7. Night function
8. Day function
9. Function button
ATTENTION! After a power cut the thermostat will return to the last registered tempera-
ture.
WARNING! BEFORE THE HEATER IS TURNED ON, IT MUST BE ATTACHED TO A WALL.
IF THE HEATER IS NOT INSTALLED CORRECTLY OR IS INSTALLED ASKEW, THIS MAY
CAUSE THE HEATER TO MALFUNCTION OR IN THE WORST CASE, BE DAMAGED.
If the temperature sensor is not functioning properly, you will see this symbol on the
display. Please contact the dealer or importer.
Power indicator for day/night thermostat
See figure 9 on separate illustration sheet
When the panel heater is using power (i.e. when it is heating), the power indicator is lit ϟ
Set desired temperature for day/night thermostat
See figure 7 on separate illustration sheet
Press the arrow buttons to set the desired temperature.
Day- and nighttime setback
When programming the heater for either day- or nighttime setback, the setback period will
be active from the time you register the program. Which means; if you want to start your
daytime setback at 7.30 am, you need to register the program at 7.30 am.
You only need to program the heater 1 time for daytime setback and 1 time for nighttime
setback. If you have programmed the heater, the setback programs will be active on all 7
days (or 7 nights).

9
EN
EXAMPLE:
Let us say you want to program the heater for both daytime- and nighttime setback (normally
the heater is set to 23 degrees). ‚bu want the heater to do the following:
1. Daytime setback activated from 7.30 am to 2.30 pm. Desired temperature: 17 degrees.
2. Nighttime setback activated from 10.00 pm to 6.00 am. Desired temperature: 18
degrees.
How to activate daytime setback
See figure 10 on separate illustration sheet
1. Tuesday 7.30 am you go to the heater and press☉on the heater‘s control panel.
2. “d” will be visible in the display. Use the + and - buttons to set what day it is today
when you are programming the heater (1= Monday, 2 = Tuesday etc.) ‚bu are not pro-
gramming the heater for the various days. This is simply to tell the heater what day it is
when you are programming the heater. Select 2 for Tuesday. Confirm by pressing ○
3. “C” will flash in the display. Use the + and - buttons to set 17 as the desired temperatu-
re for daytime setback. Confirm by pressing ○
4. “H” will flash in the display. Use the + and - buttons to set 7 hours as desired setback
period (meaning it will be active from 7.30 am to 230 pm). Confirm by pressing ○
5. The daytime setback will now be active from 7.30 am to 230 pm every day. Setback
temperature is 17 degrees.
*Control light☉is green when the heater is in an active setback period. The control light is
red when the setback period is inactive but programmed.
How to activate nighttime setback
See figure 11 on separate illustration sheet
1. Tuesday 10.00 pm you go to the heater and press☾on the heater‘s control panel.
2. “d” will be visible in the display. Use the + and - buttons to set what day it is today
when you are programming the heater (l=Monday), 2 = Tuesday etc.). You are not
programming the heater for various days. This is simply to tell the heater what day it is
when you are programming the heater. Select 2 for Tuesday. Confirm by pressing○
3. “C” will flash in the display. Use the + and - buttons to set 18 as the desirectfemperatu-
re for nighttime setback. Confirm by pressing○
4. “H” will flash in the display. Use the + and - buttons to set 8 hours as desired setback
period (meaning it will be active from 22.00 pm to 6.00 am). Confirm by pressing○
5. The nighttime setback will now be active from 10.00 pm to 6.00 am every day. The
setback temperature is 18 degrees.
*Control light(! is green when the heater is in an active setback period. The control light is red
when the setback period is inactive but programmed.
N.B! If a power cut occurs/you turn off the heater, the programming will be lost and you will
have to do this over again.

10 millnorway.com
EN
Advanced mode
If you want to have different temperature settings each day, you may use advanced mode.
To activate advanced mode you need to activate day and night setback first.
See figure 18 on seperate illustration sheet.
How to activate advanced mode for daytime setback:
1. Press and hold☉, then press+ one time.
2. “dl” (day one) will be visible W he display, and you may now choose the temperature
you want for Monday. Confirm by pressing○
3. “0 C” will flash in the display. Use the + and - buttons to set the temperature for
daytime setback. Confirm by pressing○
4. “H” will flash in the display. Use the + and - buttons to set the number of hours as
desired setback period. Confirm by pressing○
5. “SR” will be visible in the display. Now you have the option to set the time of day
that you want the setback time to start. You may choose from -4 hours to +4 from
the time your daytime setback normally starts. Meaning, if your daytime setback
normally starts at 1030, but you want the setback time to be activated 0830 every
Monday, you may use the - button to set “-2” (hours). Confirm by pressing ○
6. “d2” (day 2) which is Tuesday, will now be visible in the display and you may do the
same procedure to set the desired temperature for Tuesday. Keep repeating the
same procedure for all 7 days.
How to activate advanced mode for nighttime setback:
1. Press and hold ☾, then press + one time.
2. “dl” (day one) will be visible in the.JJLsplay, and you may now choose the temperatu-
re you want for Monday night. Confirm by pressing○
3. “0 C” will flash in the display. Use the + and - buttons to set the temperature for
nighttime setback. Confirm by pressing○
4. “H” will flash in the display. Use the plus and minus buttons to set the number of
hours as desired setback period. Confirm by pressing○
5. “SR” will be visible in the display. Now you have the option to set the time of night
that you want the setback time to start. You may choose from -4 hours to +4 hours
from the time your nighttime setback normally starts. Meaning, if your nighttime set-
back normally starts at 2200, but you want the setback time to be activated 2100
every Monday, you may use the - button to set “-1” (hour). Confirm by pressing.
6. “d2” (day 2) will now be visible in the display and you may do the same procedure to
set the desired temperature for Tuesday. Keep repeating the same procedure for all
7 days.

11
EN
Change setback temperature — daytime
See figure 12 on separate illustration sheet
Press and hold○and press☉3 times.
Enter the desired temperature for daytime setback. Save by pressing○or wait for 15
seconds for automatic confirmation.
Change setback temperature — nighttime
See figure 13 on separate illustration sheet
Press and hold○and press☾3 times.
Enter the desired temperature for nighttime setback. Save by pressing○or wait for 15
seconds for automatic confirmation.
Change number of hours — daytime
See figure 14 on separate illustration sheet
Press and hold○and press☉2 times.
Enter the desired number of hours for daytime setback. Save by pressing○or wait for 15
seconds for automatic confirmation.
Change number of hours — nighttime
See figure 15 on separate illustration sheet
Press and hold○and press☾2 times.
Enter the desired number of hours for nighttime setback. Save by pressing○or wait for
15 seconds for automatic confirmation.
Cancel (skip) setback period
See figure 16 on separate illustration sheet
Press and hold○and press☉or☾once (depending on which setback period you
want to cancel).
*The heater will skip an active setback period or the next setback period.
*During the next setback period, the heater will automatically resume the programmed
temperature reduction.
Delete a setback program
See figure 17 on separate illustration sheet
Press and hold☉or ☾(depending on which setback period you want to cancel) for 3
seconds.

12 millnorway.com
EN
Maintenance
1. For cleaning, always unplug the heater and leave it to cool.
2. Wipe the heater regularly with a damp cloth and dry the surface before turning on
the heater again.
3. The heater must be cleaned at least once a month during the he
CAUTION! The heater should never be immersed in water.
Avoid using detergents to clean the heater.
Never let any water get inside the heater; this can be hazardous.
4. Dust etc. should be removed with a soft cloth.
5. The heater can be stored in a dry and clean place.
6. If the heater stops working, do not attempt to repair it yourself because it can cause
a fire hazard and/or electric shock.
Warranty
The warranty is valid for 2 years. The heater will be repaired or replaced during this time
should any malfunction occur. The warranty applies if the heater is used according to the-
se instructions and the customer can present the heater malfunctions in any way, please
contact the store where it was purchased or the importer.
Waste disposal
The symbol#indicates that this product is not to be disposed of together with house-
hold waste. This product must be delivered to a recycling service or container for electrical
appliances and electronic equipment. This is do and prevent harm to the environment.
Local businesses (or the environmental station in your neighborhood) are required by law
to accept and recycle such products, as a means of environmentally sound disposal.
Mill International B.V.
De Giesel 5
6081 PG Haelen
The Netherlands
www.millnorway.com

1
SLO
Vsebina
L. 24
L. 5
L. 5
L. 5
L. 5
L. 6
L. 6
L. 6
L. 6
L. 6
L. 7
L. 7
L. 7
L. 7
L. 8
L. 8
L. 8
L. 9
L. 9
L. 910
L. 11
L. 11
L. 11
L. 11
L. 11
L. 11
L. 12
L. 12
L. 12
Pomembni varnostni podatki
Specifikacije
Pred prvo uporabo
Prva uporaba
Minimalne razdalje
Opis grelnika
Montaža
Umerjanje temperature
Ponastavitev grelnika
Spominska funkcija
Navodila za elektronski termostat
Indikator napajanja za elektronski termostat
Funkcija »odprtega okna«
Nastavite želeno temperaturo za elektronski termostat
Navodila za dnevni/nočni termostat
Indikator napajanja za dnevni/nočni termostat
Nastavite želeno temperaturo za dnevni/nočni termostat
Dnevni in nočni zamik
Kako aktivirati dnevni zamik
Kako aktivirati nočni zamik
Spreminjanje temperature zamika — podnevi
Spreminjanje temperature zamika — ponoči
Spreminjanje števila ur — podnevi
Spreminjanje števila ur — ponoči
Prekini (preskoči) obdobje zamika
Brisanje nastavitev zamika
Vzdrževanje
Garancija
Odlaganje odpadkov
Pozorno preberite navodila za uporabo,preden pričnete z
uporabo proizvoda. Skrbno shranite ta navodila za kasnejšo
uporabo.
TA NAVODILA ZA UPORABO SHRANITE ZA KAS-
NEJŠE PREVERJANJE!
NIKOLI SE NE DOTIKAJTE GRELNIKA ALI OHIŠ-
JA Z MOKRIMI ROKAMI!
NE POKRIVAJTE GRELNIKA, DA NE
PRIDE DO PREGREVANJA.

2millnorway.com
SLO
Pomembni varnostni podatki
Pri uporabi elektronskih aparatov je potrebno upoštevati
splošne varnostne smernice, še posebej v prisotnosti
otrok.
OPOZORILO! Za preprečevanje električnega udara
in škode zaradi vročine, je potrebno vedno iz kij učiti
vtič pred premikanjem ali čiščenjem grelnika.
SKRBNO PREBERITE NAVODILA
• Ta proizvod je namenjen zgoij domači uporabi.
• Grelnik prikijučite na hišno omrežno napajanje, kot je nave-
deno na grelniku.
• Novi grelniki ob prvi uporabi oddajajo določen vonj. To bo
po krajšem času izginilo in je povsem neškodijivo.
• Preverite, če so v grelne elemente grelnika padli koščki em-
balažne pene ali lepenke. Te koščke je potrebno odstraniti,
da ne pride do neprijetnih vonjev.
• Preprečite pregrevanje grelnika — ne pokrivajte.
• Vedno izklopite grelnik in ga iztaknite iz vtičnice, če ga daij
časa ne uporabljate.
• Bodite še posebej pozorni, če se grelnik uporabijo v prosto-
rih, kjer se nahajajo otroci, invalidi ali starejši.
• Grelnik ne sme biti postavijen neposredno pod električno
vtičnico.
• Kabla ni dovoijeno polagati pod preproge. Položen mora biti
tako,da se nihče ne more spotakniti obenj.
• Če sta kabel ali vtikač poškodovana, se grelnika ne sme
uporabljati.

3
SLO
• Grelnika se ne sme uporabijati, čeje padel na tla alije kakor
koli poškodovan in okvarjen.
• Poškodovani kabel mora popraviti proizvajalec ali strokov-
njak, da ne pride do nevarnih situacij.
• Ne uporabljajte podaljškov kabla, saj se lahko pregrejejo in
vžgejo.
• Nikoli ne pokrivajte prezračevalnih odprtin na grelniku.
Preprečite požarno nevarnost, tako da preprečite blokiranje
ali pokrivanje prezračevalnih odprtin. Grelnik je potrebno
uporabijati v prostorih z običajnimi ravnimi tlemi.
• Grelnika ni dovoljeno namestiti v bližini vnetljivih materialov,
saj obstaja nevarnost požara.
• Grelnika ni dovoljeno uporabljati v prostorih, kjer se hranijo
bencin, laki, barvila ali druge vnetijive snovi, npr. v garaži.
• Nikoli se ne dotikajte električnega grelnika z mokrimi roka-
mi. Namestite ga tako, da se ga ne more dotakniti osebe
med tuširanjem ali v kadi.
• Nekateri deli izdelka se lakho zelo segrejejo in povzročijo
opekline. Posebno pozornost je potrebno posvetiti otrokom
in ranljivim osebam.
• Pred premikanjem je grelnik potrebno izkijučiti, iztakniti vtič,
grelnik pa se mora ohladiti.
• Ne preobramenite električnih povezav (el. omrežja) grelnika.
• Grelnik lahko preobremeni el. tokokrog, če v isto vtičnico
prikijučite tudi drugi električne naprave.
• Ne uporabljajte grelnika v majhnih prostorih, kjer se nehaja-
jo osebe, ki prostora ne morajo zapustiti same, razen če so
pod stalnim nadzorom.
• Proizvoda ne smejo uporabljati otroci mlajši od 8 let in ose-
be z omejenimi fizičnimi ali umskimi zmožnostmi ali neiz-

4millnorway.com
SLO
kušene oz. nepoučene osebe, razen če so pod nadzorom
ali so bile poučene o varni uporabi proizvoda ter razumejo s
tem povezane nevarnosti.
• Otroci se ne smejo igrati s proizvodom. Otroci brez nadzora
ne smejo čistiti ali vzdrževati proizvoda.
• Otroci mlajši od 3 let se ne smejo približevati proizvodu,
razen če so pod stalnim nadzorom.
• Otroci stari od 3 do 8 let lahko proizvod izkijučijo/vkijučijo
zgoij, če je grelnik nameščen v skladu z navodili za uporabo
in so bili otroci poučeni o varni uporabi oz. so med uporabo
pod nadzorom ter razumejo s tem povezane nevarnosti.
• Ne uporabijajte tega grelnika v neposredni bližini kadi, tuša
ali plavalnega bazena.
OPOZORILO! Grelnika ni dovoljeno uporabljati, ce so
steklene plošce poškodovane (to velja za proizvode z nazivi
modelov, ki se zacnejo na MB).
Specifikacij
Mudel Thermostat Barva Višina Širina Jakost toka Moc
(W) IP-grad
IB250 Elektronski Bela 30.0 cm 35.0 cm 220240V~, 5060Hz 250 IPx4
IB600DN Dan/nač Bela 40.0 cm 65.0 cm 220240V~, 5060Hz 600 IPx4
IB900DN Dan/nač Bela 40.0 cm 85.0 cm 220240V~, 5060Hz 900 IPx4
IB1200DN Dan/nač Bela 40.0 cm 105.0 cm 220240V~, 5060Hz 1200 IPx4
IB800L DN Dan/nač Bela 25.0 cm 105.0 cm 220240V~, 5060Hz 800 IPx4
IB1000L DN Dan/nač Bela 25.0 cm 121.5 cm 220240V~, 5060Hz 1000 IPx4
MB250 Elektronski Bela 30.0 cm 36.5 cm 220240V~, 5060Hz 250 IPx4
MB600DN Dan/nač Bela 40.0 cm 66.5 cm 220240V~, 5060Hz 600 IPx4
MB900DN Dan/nač Bela 40.0 cm 86.5 cm 220240V~, 5060Hz 900 IPx4
MB1200DN Dan/nač Bela 40.0 cm 106.5 cm 220240V~, 5060Hz 1200 IPx4
MB800L DN Dan/nač Bela 40.0 cm 106.5 cm 220240V~, 5060Hz 800 IPx4
MB1000L DN Dan/nač Bela 25.0 cm 123.0 cm 220240V~, 5060Hz 1000 IPx4
Grelniki se lahko uporabljajo v coni 2 v kopalnicah (odobreno za IPx4)

5
SLO
Pred prvo uporabo
Po razpakiranju grelnika preverite, če je bil izdelek poškodovan med prevozom. Stopite v
stik s preprodajalcem ali uvoznikom, če odkrijete vidne poškodbe na izdelku.
Zunanjo embalažo shranite za kasnejši prevoz grelnika. Embalažo je potrebno odlagati na
primeren način. Plastične vreče shranite stran od dosega otrok.
Prva uporaba
Ob prvi vkijučitvi ali vkijučitvi po daijšem obdobju mirovanja, lahko grelnik kratek čas oddaja
vonj po ožganem. Toje normalno.
Pred uporabo pozorno preberite vsa navodila. Shranite navodila za uporabo za kasnejše
preverjanje.
Normalno je tudi, da grelnik med segrevanjem in ohlajanjem proizvaja določene »zvoke«.
Minimalne razdalje
Opis grelnika
Glej sliko 1 na posebnem listu z diagramom
A MILL INVISIBLE
1. Vklop/izklop
2. Stenski nosilec
3. Temperaturni senzor
4. Oddajanje toplote
5. Termostat
6. Jekleni sprednji del
B MILL GLASS
1. Vklop/izklop
2. Stenski nosilec
3. Temperaturni senzor
4. Oddajanje toplote
5. Termostat
6. Steklen sprednji del
≥50 mm ≥50 mm
≥100 mm
≥100 mm pred
drelnik
≥100 mm

6millnorway.com
SLO
Montaža
Glej sliko 2 na posebnem listu z diagramom
A.Izvrtajte luknje v steno za izvrtini 1 in 2. Nato izvrtajte luknje za najvišje lege (izvrtini 3
in 4 z uporabo 6).
B. Vstavite stenske vtče v izvrtane luknje in pritrdite nosilec s 4 vijaki.
C. Postavite grelnik na spodnja držala na nosilcu, nato obesite grelnik na zgornja držala
(dvignite grelnik, da ga uravnate z zgornjimi držali). Privijte blokirne vijake na vrh nosil-
ca (v smeri urinega kazalca).
POZOR! SAMO HORIZONTALNI PLACEMENT.
Umerjanje temperature
Glej sliko 3 na posebnem listu z diagramom
Pride lahko do odstopanja med temperaturo, ki jo zabeleži grelnik in dejansko temperaturo
v prostoru. To se lahko zgodi iz več razlogov, najpogostejši pa je, da je grelnik postavljen v
določeni razdalji od mesta, kjer se nahajate. Če na primer temperaturo nastavite na 22 sto-
pinj, lahko pričakujete, da bo temperatura enaka kot tam, kjer se nahaja kavč. Vendar pa je
temperaturni senzor nameščen na sam proizvod, zato lahko pride do odstopanj v tempe-
raturi. Za odpravo tega so vsi grelniki Mill opremljeni s funkcijo umerjanja, ki vam omogoča
nastavitev temperature, ki jo zaznava grelnik.
Opomba: Temperatura v prostoru se mora ustaliti, preden pričnete z umerjanjem.
Pritisnite○2-krat in uporabite + ali – za nastavitev dejanske temperature, ki je zaznana
prostoru. Potrdite s○ali počakajte 15 sekund za samodejno potrditev.
Ponastavitev grelnika
Glej sliko 4 na posebnem listu z diagramom
Izklopite glavno stikalo grelnika.
Držite gumb○medtem pa vklopite glavno stikalo grelnika.
Spominska funkcija
Grelnik ima v spominu vse nastavitve temperature in se samodejno vrne naželeno tem-
peraturo po začasni prekinitvi elektr nega napajanja. Vaše nastavitve dnevnih in nočnih
zamikov pa se bodo po prekinitvi elektr nega napajanja izbrisale, zato jih boste morali
ponovno nastaviti.