Milwaukee M18 User manual

M18 ONESLDP
Original instructions

2 3
8
7
12
10
4 16
6
15
14
ON OFF
CR2032
18
Text section with Technical Data, important Safety
and Working Hints and description of Symbols

4 5
Remove the battery pack
before starting any work on
the machine.
click
click
1
2
2
1
1
1
2
1
2

6 7
ON
OFF
78-100 %
55-77 %
33-54 %
10-32 %
< 10 %

8 9
If the light is plugged into a AC outlet, the light runs in AC mode. Currently the battery will be charged.

10 11
The adjustment of the lighting range is only possible in DC
Mode and 110 V AC.
In AC (230 V) Mode only 360° operation.
1.
2.
3.

12 13
Brightness setting is only possible in DC Mode
and 110 V AC.
In 230 V AC Mode only max. brightness aktiv.

14 15

16 17
1 4
2 5
3 6
click
3V CR2032
+

1918
M18 ONESLDP
.............................................................. 3,5 h
.............................................................. 7,0 h
............................................................ 14,0 h
........................................................... 9000 lm
........................................................... 4800 lm
........................................................... 2500 lm
............................................................... 80
........................................................... 4000 K
...................................................... 110-240 V
.........................EU/DK/FR: 230 V, UK: 110 V
............................ EU/FR/UK: 16 A, DK: 13 A
............................................................. 190 W
............................................................... 81 W
............................................................... 18 V
.................................................. 2402-2480 MHz
.............................................................. 1,8 dBm
..................................... 4.0BT signal mode
.........................EU/DK/FR: 230 V, UK: 110 V
............................................................... 85 W
............................................................... 18 V
................................................................. 3 A
..............................................................115 min
............................................................. 135 min
............................................................. 195 min
.............................................................11,4 kg
.............................................................11,8 kg
............................................................ 12,1 kg
............................................................ 12,5 kg
....................................................IP40/IP54
ENGLISH
This appliance is not intended to
be used or cleaned by persons
with reduced physical, sensory or
mental capabilities, or lack of
experience or knowledge, unless
they have been given instructions
concerning the safe use of the
appliance by a person legally
responsible for their safety. They
should be supervised whilst using
the appliance. Children shall not
use, clean or play with this
appliance, which when not in use
should be secured out of their
reach.
ADDITIONAL SAFETY INSTRUCTIONS
Remove the battery pack before starting any work on the
appliance.
Do not dispose of used battery packs in the household
refuse or by burning them. Milwaukee Distributors offer to
retrieve old batteries to protect our environment.
Do not store the battery pack together with metal objects
(short circuit risk).
Use only compatible Milwaukee chargers from the same
battery platform for charging battery packs. Do not use
battery packs from other systems.
Battery acid may leak from damaged batteries under
extreme load or extreme temperatures. In case of contact
with battery acid wash it offimmediately with soap and
water. In case of eye contact rinse thoroughly for at least 10
minutes and immediately seek medical attention.
Warning! To reduce the risk of fire, personal injury, and
product damage due to a short circuit, never immerse your
tool, battery pack or charger in fluid or al-low a fluid to flow
inside them. Corrosive or conductive fluids, such as
seawater, certain industrial chemicals, and bleach or bleach
containing products, etc., Can cause a short circuit.
SPECIFIED CONDITIONS OF USE
The battery lamp can be used as lighting independently of a
mains power supply.
Additionally the charger can charge the specified Milwaukee
battery packs.
Do not use this product in any other way as stated for
normal use.
EC DECLARATION OF CONFORMITY
Hereby, Techtronic Industries GmbH declares that the radio
equipment type M18 ONESLDP is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
http://services.milwaukeetool.eu
GB- DECLARATION OF CONFORMITY
Hereby, Techtronic Industries GmbH declares that the radio
equipment type M18 ONERSAL is in compliance with
Directive S.I. 2017/1206 (as amended). The full text of the
GB declaration of conformity is available at the following
internet address: http://services.milwaukeetool.eu
ONE-KEY™
To learn more about the ONE-KEY functionality for this tool,
please reference the Quick Start guide included with this
product or go to www.milwaukeetool.com/one-key. To
download the ONE-KEY app, visit the App Store or Google
Play from your smart device.
Also, when the product experiences ESD, the Bluetooth
communication will be disconnected. It needs to be reset
manually to recover.
We considered the results to be within our minimum
acceptable performance level according to EN 55014-2 / EN
301489-1 / EN 301489-17.
ONE-KEY™ Indicator
Solid Blue Wireless mode is active and ready to be
configured via the ONE-KEY™ app.
Blinking Blue Tool is actively communicating with the
ONE-KEY™ app.
Blinking Red Tool is in security lockout and can be
unlocked by the owner via the ONE-
KEY™ app.
LI-ION BATTERIES
The rechargeable batteries are partially charged. The LED
on the battery indicates the state of charge.
If it is not used for long periods, the rechargeable battery will
switch to the non-operative state.
When fully discharged the rechargeable battery switches off
automatically (depth discharge not possible).
Under extreme circumstances, the internal temperature of
the battery could become to high. If this happens, the
battery will shut down.
Place the battery on the charger to charge and reset it.
The state of charge can be read by pressing the button on
the rechargeable battery. The battery can be left in the
electric tool while the reading is taken but it must be
switched offat least one minute beforehand (otherwise the
display will be inaccurate). The number of LEDs illuminated
indicates the state of charge. A flashing LED indicates a
max. power reserve of 10%.
As a general principle, if the electric tool should fail to work
after inserting the rechargeable battery, then the battery
should be plugged into the charger. The displays on the
battery and charger will then provide information about the
condition of the battery.
In low temperatures work may continue at reduced output.
CHARGING CHARACTERISTICS
After inserting the battery into the reception of the charger
the battery will automatically be charged (red control lamp is
illuminated continuously)
When a hot or cold battery pack is inserted into the charger
(flashing red lamp), charging will begin automatically once
the battery reaches the correct charging temperature
TECHNICAL DATA BATTERY-LAMP
Lighting time with two fully charged battery (9.0 Ah)
Mode 3 High Level...............................................................
Mode 2 Med Level ...............................................................
Mode 1 Low Level ...............................................................
Luminous flux
High Level............................................................................
Med Level ............................................................................
Low Level ............................................................................
Colour rendering index (CRI)..................................................
Colour temperature.................................................................
AC-Mode
Voltage.................................................................................
Rated Output Voltage ..........................................................
Rated Output Current ..........................................................
Rated Power Input...............................................................
DC-Mode
Rated Power Input...............................................................
Battery voltage.....................................................................
Frequency band(s) of Bluetooth .............................................
Radio-frequeny power ............................................................
Bluetooth version....................................................................
AC input..................................................................................
Charger rated power input......................................................
Charger output........................................................................
Quick charge current ..............................................................
Battery charging time with 5.0 Ah...........................................
Battery charging time with 6.0 Ah...........................................
Battery charging time with 9.0 Ah...........................................
Weight without battery............................................................
Weight according EPTA-Procedure 01/2014 (2.0 Ah) ............
Weight according EPTA-Procedure 01/2014 (5.0 Ah) ............
Weight according EPTA-Procedure 01/2014 (9.0 Ah) ............
Protection class ......................................................................
CHARGER SAFETY INSTRUCTIONS
Do not store the battery pack together with metal objects
(short circuit risk).
Only the following battery packs can be charged with this
charger:
Battery Cat.
No.
Cell Type DC Volts Capacity Cell No.
M18B Li-Ion 18 V ≤1.5 Ah 5
M18BX Li-Ion 18 V ≤3.0 Ah 2 x 5
M18B2 Li-Ion 18 V ≤2.0 Ah 5
M18B4 Li-Ion 18 V ≤4.0 Ah 2 x 5
M18B5 Li-Ion 18 V ≤5.0 Ah 2 x 5
M18B6 Li-Ion 18 V ≤6.0 Ah 2 x 5
M18B9 Li-Ion 18 V ≤9.0 Ah 3 x 5
Do not try to charge non-rechargeable batteries with this
charger.
No metal parts must be allowed to enter the battery section
of the charger (short circuit risk).
Never break open battery packs and chargers and store
only in dry rooms. Keep dry at all times.
Do not touch the tool with conducting objects.
Never charge a damaged battery pack. Replace by a new
one.
Before use check machine, cable, and plug for any
damages or material fatigue. Repairs should only be carried
out by authorised Service Agents.
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
BATTERY LAMP SAFETY INSTRUCTIONS
WARNING Do not direct the light beam at persons or
animals and do not stare into the light beam yourself (not
even from a distance). Staring into the light beam may result
in serious injury or vision loss.
WARNING This device contains a lithium button/coin
cell battery. A new or used battery can cause severe
internal burns and lead to death in as little as 2 hours
if swallowed or enters the body. Always secure the battery
cover. If it does not close securely, stop using the device,
remove the batteries, and keep it away from children. If you
think batteries may have been swallowed or entered the
body, seek immediate medical attention.
Caution – this product is provided with cooling openings in
the bottom enclosure. Only install this luminaire on a surface
that will not allow accumulation of water into the housing.
Keep the product away from puddles,etc.
ENGLISH

20 21
(0°C...60°C). The max. charging current is flowing when the
temperature of the Li-Ion-battery is between 5°C and 40°C.
Charging time varies depending on the battery temperature,
charge needed and the type of battery pack being charged.
Once the battery is fully charged, the LED on the charger
changes from red to green.
Remove the battery pack from the tool for charging when
convenient for you and your job. Milwaukee batteries do not
develop a “memory” when charged after only a partial
discharge. It is not necessary to run down the battery pack
before placing it on the charger.
As a general practice, it is best to unplug battery chargers
and remove batteries when not in use. No battery pack
damage will occur, however, if the charger and battery pack
are left plugged in.
If the LED flashes alternately red/green, then the
rechargeable battery is either not fully pushed in or there is
a fault with the battery or charger. Take the charger and
battery out of use immediately for safety reasons and have
them inspected by a Milwaukee customer service centre
LIGHT INDICATORS
Continuous red Charging
Continuous green Charging is complete
Fast flashing red
Battery is too hot/cold -
Charging will begin when
battery reaches correct
charging temperature
Slow flashing red
Battery charge is pending -
Charging will begin when the
first pack is fully charged
Flashing red/
green
Damaged or faulty battery
pack
BATTERIES
Battery packs which have not been used for some time
should be recharged before use.
Temperatures in excess of 50°C (122°F) reduce the
performance of the battery pack. Avoid extended exposure
to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept
clean.
For an optimum life-time, the battery packs have to be fully
charged, after used.
To obtain the longest possible battery life remove the battery
pack from the charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 27°C
and away from moisture
Store the battery packs in a 30% - 50% charged condition
Every six months of storage, charge the pack as normal.
TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods
Legislation requirements.
Transportation of those batteries has to be done in
accordance with local, national and international provisions
and regulations.
• The user can transport the batteries by road without
further requirements.
• Commercial transport of Lithium-Ion batteries by third
parties is subject to Dangerous Goods regulations.
Transport preparation and transport are exclusively to be
carried out by appropriately trained persons and the
process has to be accompanied by corresponding experts.
When transporting batteries:
• Ensure that battery contact terminals are protected and
insulated to prevent short circuit.
• Ensure that battery pack is secured against movement
within packaging.
• Do not transport batteries that are cracked or leak.
Check with forwarding company for further advice
AC OPERATION
Several lamps can be connected together in AC mode.
Please observe the following limits.
230 V
Fuse maximum number of lamps
10 A 6
16 A 10
110 V
10 A 4
16 A 6
MAINTENANCE
For type Y attachments:
If the external flexible cable or cord of this luminaire is
damaged, it shall be exclusively replaced by the
manufacturer or his service agent or similar qualified person
in order to avoid a hazard.
Caution! Risk of electric shock.
The light source contained in this luminaire shall only be
replaced by the manufacturer or his service agent or a
similar qualified person.
Use only Milwaukee accessories and spare parts. Should
components need to be replaced which have not been
described, please contact one of our Milwaukee service
agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered.
Please state the machine type printed as well as the six-digit
No. on the label and order the drawing at your local service
agents or directly at: Techtronic Industries GmbH,
Max-Eyth-Straße 10, 71364 Winnenden, Germany.
ENGLISH
SYMBOLS
CAUTION! WARNING! DANGER!
Please read the instructions carefully before
starting the machine.
Always disconnect the plug from the socket
before carrying out any work on the machine.
Remove the battery pack before starting any
work on the machine.
Do not stare at the operating light source.
Do not swallow the coin cell battery!
Class II tool.
Tool in which protection against electric shock
does not rely on basic insulation only, but in
which additional safety precautions, such as
double insulation or reinforced insulation, are
provided.
There being no provision for protective earthing
or reliance upon installation conditions.
EU (production code 4000 4589 08)
France (production code 4000 4588 96)
Door opened status -> protection class IP40
EU (production code 4000 4589 08)
France (production code 4000 4588 96)
Door closed status -> protection class IP54
UK (production code 4000 4589 02)
Protection class IP54
Denmark (production code 4000 4588 89)
AC mode -> protection class IP40
Denmark (production code 4000 4588 89)
DC mode -> protection class IP54
ENGLISH
Do not dispose of waste batteries, waste
electrical and electronic equipment as unsorted
municipal waste. Waste batteries and waste
electrical and electronic equipment must be
collected separately.
Waste batteries, waste accumulators and light
sources have to be removed from equipment.
Check with your local authority or retailer for
recycling advice and collection point.
According to local regulations retailers may have
an obligation to take back waste batteries and
Waste electrical and electronic equipment free of
charge.
Your contribution to re-use and recycling of waste
batteries and waste electrical and electronic
equipment helps to reduce the demand of raw
materials.
Waste batteries, in particular containing lithium
and waste Electrical and electronic equipment
contain valuable, recyclable materials, which can
adversely impact the environment and the
human health, if not disposed of in an
environmentally compatible manner.
Delete personal data from waste equipment, if
any.
T3.15A Time-lag fuse 3.15 A
L
E
D
230V
LED LED
The light source and the control
device cannot be exchanged.
This product contains a light source
of energy efficiency class D.
European Conformity Mark
British Confomity Mark
Ukraine Conformity Mark
EurAsian Conformity Mark

22 23

(04.22)
4100 4148 58
Copyright 2022
Techtronic Industries GmbH
Max-Eyth-Str. 10
71364 Winnenden
Germany
[phone]
www.milwaukeetool.eu
Techtronic Industries (UK) Ltd
Parkway
Marlow, SL7 1YL
UK