Mimosa Signature Silverleaves 3192437 User manual

Step 2:
Step 1:
using the bolt (D),washer(G), bolt cover(F)and Allen key(H).
Secure the table frame (B) to the table legs (A),
2
4
A
B
C
D
E
F
1
16
1
20
16
H
1
F
G
D
A
B
C
B
AD
F
G
I
4
Bolt cover
Washer
Allen Key
Glass
G
Repeat for each leg.
Assembly Instruction
Item number:3192437
Support Bracket
Use the support bracket (C) to secure the table
frame (B) with the table legs (A), using bolt (D),
washer (G), allen key (H) and bolt cover (F).
SILVERLEAVES 3 PCE RESIN WICKER BENCH SETTING
Table leg
Table frame
M6x20
M6x35

IA
B
Step 3: Use scissors to carefully cut and remove the strapping securing the glass in place.
Step 4: Carefully lift the glass top and place on a clean protected surface.

E
G
A
B
Step 5:
Step 7:
Step 6:
IA
B
Using the bolt(E) ,washer(G) with the shaft sleeve,secure with the table frame(A)and leg frame(B),and using the allen key (H).
Important Notice:
Do not fully tighten bolts until the table is fully assembled.
Carefully replace the glass (I) back on top of the table frame (A).
Your table is now fully assembled and ready for use.

Step 4:
Step 1:
Step 2:
Step 3:
2
2
A
B
C
D
E
F
1
10
F
A
BE
D
G
1
C
B
A
D
F
E
10
10
H
4
H
B
Your bench is now ready for use.
Washer
Bolt cover
Allen key
Adjusting knob
Important Notice:
Do not fully tighten bolts until the table is fully assembled.
Support bracket
Bench frame
Bench leg
Secure the bench frame (A) to the bench legs (B),
Repeat for the other leg.
using bolt (D), washer (E), bolt cover (F) and allen key (G).
Allen key (H) and bolt cover (F).
Use the support bracket(C) to secure the bench frame (A)
to the bench legs(B), using bolt (D), washer (G),
Insert the adjusting knob (H) into the bench leg (B).
M6x20