Mimosa Noosa User manual

NOOSA BUTTERFLY GAZEBO
ASSEMBLY GUIDE AND
OPERATING INSTRUCTIONS
2019_Sortento_Gazebo_3x3M_IM_04.indd 1 5/07/2019 5:06:52 PM

MIMOSA NOOSA BUTTERFLY
GAZEBO
WARRANTY CONDITIONS
Any claim under this warranty must be made within 3 years of the
date of purchase of the product. To make a claim under the
warranty, take the product (with proof of purchase) to any Bunnings
store (see www.bunnings.com.au for store locations) or contact
Gale Pacific.
Gale Pacific bears reasonable, direct, expenses of claiming under
the warranty.
You may submit details and proof to Gale Pacific for consideration.
The warranty covers manufacturer defects in materials, workmanship
and finish under normal use.
This warranty is provided in addition to other rights and remedies you
may have under law: our goods come with guarantees
which cannot be excluded under the Australian Consumer
Law or Consumer Guarantees Act 1993 (NZ). You are entitled to
replacement or refund for a major failure and to compensation for
other reasonably foreseeable loss or damage. You are also entitled
to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to
a major failure.
The warranty excludes damage resulting from product misuse or
product neglect.
The warranty covers domestic use only and does not apply to
commercial applications.
This warranty is given by Gale Pacific, ABN 80 082 263 778, 145
Woodlands Dr Braeside Vic 3195, 1800 331 521, galepacific.com
New Zealand #: 0800 555 171
WARRANTY EXCLUSIONS
Fading due to weather exposure or damage to the frame and
fabric through accident, misuse or negligence. Your gazebo is a
non-permanent structure. Always ensure the gazebo is properly
weighted down. Damage caused by not following the instructions
will void your warranty.
2019_Sortento_Gazebo_3x3M_IM_04.indd 2 5/07/2019 5:06:52 PM

Please check all parts against the parts list before commencing
construction of Gazebo.
Make the most of your outdoor
living area with your very own
Mimosa Noosa Bufferfly Gazebo.
Relax and enjoy the outdoors while
being protected from the sun.
The Mimosa powder coated
aluminium frame Sorrento Gazebo
is perfect for shading your garden,
deck, courtyard or swimming pool.
IMPORTANT
This structure is a non-permanent
structure and the warranty does
not cover damage incurred under
extreme weather conditions
including heavy rain, high winds or
if exposed to high heat from
heaters or BBQs.
PARTS LIST
Safety precautions should always
be followed when assembling and
using this product to reduce the
risk of personal injury and damage
to equipment.
Please read all instructions before
assembly and use. Never leave
children unattended around/
under this gazebo.
Do not attempt to assemble or use
the gazebo in moderate or heavy
wind conditions. Always secure it
during heavy winds or extreme
weather conditions to avoid
damage to the gazebo or
personal injury.
PARTS LIST QTY
A Upper Corner Poles 2
B Upper Corner Poles 2
C Cover Poles 4
D Lower Leg Poles 4
E Feet 4
F Common Pole 8
G Common Bolts 16
H Centre Pole 4
JLeg Bolts with Plastic Caps 4
KLower Leg Pole Bolts with Plastic Caps 4
LElastic Bobbles 1
MFeet Bolts 12
NSpanner 1 (For Lower Leg Pole Bolts) 1
Spanner 2 (For Upper Corner Pole Bolts) 1
A
C
D
E
B
F
G
H
MIMOSA NOOSA BUTTERFLY
GAZEBO
2019_Sortento_Gazebo_3x3M_IM_04.indd 3 5/07/2019 5:06:52 PM
O
Canopy 1
P
I
J
K
L
M
N
O
P

STEP BY STEP INSTRUCTIONS
MIMOSA NOOSA BUTTERFLY
GAZEBO
2019_Sortento_Gazebo_3x3M_IM_04.indd 4 5/07/2019 5:06:53 PM
Step 1: Measure a 4 x 4m square in the
postion you want the gazebo, mark the
four corners with chalk or tape. Ensure the
pole feet are placed on these markings
with even spacing between poles to
provide a sound structure.
Step 2: Connect the common poles (f)
using centre poles (h) as shown.
Step 3: Connect the common poles (f)
into upper corner poles (a) and (b) as
shown. Using spanner (n) provided secure
with common bolts.
Step 4: Attach the feet (e) into lower
leg poles (d) using bolts (j) and tool (m).
f
g
a
n
f
f
b
g
n
ff f f
f
f
f
f
h
h
h
h
a
b
f
f
h
d
d
e
j
m
l
f
f
h

STEP BY STEP INSTRUCTIONS
MIMOSA NOOSA BUTTERFLY
GAZEBO
2019_Sortento_Gazebo_3x3M_IM_04.indd 5 5/07/2019 5:06:53 PM
Step 6: Insert the four cover poles (c) along the edges of the canopy.
Connect corners of the canopy to the corners of the frame with turnbuckles (o).
p
a
a
b
b
o
c
c
p
p
p
Step 5: Unfold the canopy (p).

STEP BY STEP INSTRUCTIONS
MIMOSA NOOSA BUTTERFLY
GAZEBO
2019_Sortento_Gazebo_3x3M_IM_04.indd 6 5/07/2019 5:06:54 PM
Step 7: Secure the edges of canopy to frame with elastic bobbles (k). Tighten the
turnbuckles (o) by rotating.
Step 8: Lift the assembled upper section of the gazebo and inser the lower leg of the
gazebo and inser the lower leg poles (d) into the upper corner poles (a) and (b).
Secure the connection with bolts and plastic caps (i).
k
o
p
p
d
d
b
b
a a
d
d
m
i

STEP BY STEP INSTRUCTIONS
MIMOSA NOOSA BUTTERFLY
GAZEBO
2019_Sortento_Gazebo_3x3M_IM_04.indd 7 5/07/2019 5:06:54 PM
Step 9: Once erect, ensure the Butterfly gazebo is firmly secured to a stable surface, you
can use feet bolts (I) if desired.

2019_Sortento_Gazebo_3x3M_IM_04.indd 8 5/07/2019 5:06:54 PM