Mimosa 3192508 User manual

PALERMO GAZEBO
Item number: 3192508
3.0 X 3.6M
Assembly Instructions

Roof frame
Leg tube
The four inclined tube
The middle inclined tube
Surrounding edge tube
Surrounding edge tube
Surrounding edge tube
The powder layer
The powder layer
The powder layer
polycarbonate panel
polycarbonate panel
Roof frame
Roof frame
Roof frame

Inclined top outside iron
Middle cape corner fittings
polycarbonate panel
polycarbonate panel
polycarbonate panel
Angle plate of supporting
Angle plate of supporting
The four package plate
The middle package plate
Leg base
Leg base cover
The plate on the top
The plate up the top
Four cape corner fittings
Outside the top iron

Bolt
Washer
Allen Key
Stake
Hanging hook
Bolt
Bolt
Bolt
Bolt
Bolt

using the allen key (Y) to complete with the bolt (V1)
O
N
O
N
Connect the leg base cover(O) to the leg tube( A),
secure the leg base (N) and the leg tube (A),

Secure the ring beam(B)to the ring beam(B1).
Secure the ring beam(B2)to the ring beam(B3).
STEP 02
B
B1
B2
B3
B2 B3 V
V1
B1
Using the allen key (Y),with bolt (V) and bolt (V2).
Using the allen key (Y),with bolt (V) and bolt (V2).

Secure the middle package plate(K)
with the ring beam(B) and ring beam (B1),push.
Secure the middle package plate(K)
with the ring beam(B2) and ring beam (B3),push.

by using allen key(Y) with the bolt (V)
Secure the Angle plate of supporting (I) ,
I
2
1
I1
I
I
1
I
V1
V1V1
V1
Secure the ring beam (B2) ,ring beam (B3)
with the leg tube (A) ,by using allen key (Y)
with the bolt (V6) ,bolt (V5).
the Angle plate of supporting(I1),

Secure the four package plate(J) with the ring beam (B1) and ring beam (B2),push.
Secure the four package plate(J) with the ring beam (B) and ring beam (B3),push.

9
V1
V1
Secure Four cape corner fittings (P)
with the four inclined tube(C),
by using allen key(Y) with the bolt (V)
Secure Middle cape corner fittings (Q)
with The middle inclined tube (C1),
by using allen key(Y) with the bolt (V)

10
STEP 07
V1
Secure the four inclined tube(C)
with the plate up the top (M).
secure the Four cape corner fittings (P )
with the ring beam (B),ring beam (B3).
Secure by using allen key(Y) with the bolt (V).

By using allen key(Y) with the bolt (V).
with the plate up the top (M)
with the ring beam (B),ring beam (B1).
STEP 08
11
V1
Secure the middle inclined tube (C1)
secure the Middle cape corner fittings (Q )

T
STEP 09
12
Secure the plate on the top(L)
with the plate up the top (M),
by using the allen key (Y) with bolt (V4) and washer (W).
Secure hanging hook (T) with the plate up the top (M), screwing hanging hook (T).

13
Secure the polycarbonate panel(E) with the polycarbonate panel(G)
Secure the polycarbonate panel(E1) with the polycarbonate panel(F1) (G1)
Secure the polycarbonate panel(E2) with the polycarbonate panel(H)

14

Secure the polycarbonate panel(H)(E2)
Secure the polycarbonate panel(F1)(G1)(E1)
Secure the polycarbonate panel(F)(G)(E)
15
G
G
H
F
G
with the four inclined tube(C),
the middle inclined tube (C1)
with the four inclined tube(C),
the middle inclined tube (C1)
with the middle inclined tube (C1)

Secure Inclined top outside iron (R ) ,
Surrounding edge tube(D) ,Surrounding edge tube(D1)
with the four inclined tube(C),
by using the allen key (Y) with bolt (V3).
Secure outside the top iron(R1),
Surrounding edge tube(D) ,Surrounding edge tube(D1),
Surrounding edge tube(D2) with the middle inclined tube (C1),
by using the allen key (Y) with bolt (V3).

Secure the Stake(Z) with the leg base (N), then assembly of your gazebo is completed.