Mimosa Signature Silverleaves 3192438 User manual

Chair (A)x1
Support Bar (B)x1
Cushion (C)x1
Cap,Screw and Washer (D)x6
Allen Key (E)x1
A
B
C
D
3192438
Use screws and washers (D) to fit the support bar (B) to the chair (A). Once all screws are in position
tighten securely using Allen key (E), then cap the screws. Complete the chair assembly by securing
the cushion (C). Repeat for all the chairs.
A S S E M B L Y I N S T R U C T I O N S
SILVERLEAVES 7 PCE RESIN
WICKER BAR SETTING
PARTS LIST

Cap,Screw and Washer
(G)x24
Allen Key (H)x1
Table Top (A)x1
Right Leg (B)x2
Center Support Bar (E)x1
Left Leg (C)x2
Cross Support Bar (D)x2
Glass (F)x1
A
B
C
B
C
D
E
F
G
G
3192438
Use screws and washers(G) to fit the legs (B) and (C) to the table
top (A). Loosely tighten screws using Allen Key (H). Then attach
the cross support bar (D) to the table legs (C&B), using screws
and washers (G) and Allen Key (H).
Attach the center support bar(E) to the cross support bar(D), using
screws and washers (G) and Allen Key (H). Once all screws are in
position, tighten securely, then cap the screws. Carefully place the
glass table top onto the bar table. Your setting is now ready for use.
A S S E M B L Y I N S T R U C T I O N S
SILVERLEAVES 7 PCE RESIN
WICKER BAR SETTING
PARTS LIST