Mimosa BORDEAUX 0101667 User manual

ASSEMBLY INSTRUCTIONS
BORDEAUX TEAK BENCH
100% FSC Certified Teak Timber
Distressed Timber-Natural Oil Finish
22mm Thick Timber Bench Top Slats
Size: 230Lx38Wx43.5Hcm
Max weight capacity: 120kgs per seat
Page 1

ASSEMBLY INSTRUCTIONS
BORDEAUX TEAK BENCH
100% FSC Certified Teak Timber
Your Bordeaux teak bench requires assembly prior to use. It is
important that you read the entire assembly instructions to
become familiar with the unit before you set up the table.
Safety Warning and Precautions
WARNING: When setting up your table, basic precautions should
always be followed to reduce risk of personal injury and
damage to the table.
Read all instructions before assembly and usage of this product.
1. Select ideal location. Set out all parts on a clear and level
surface prior to assembly. Ideally, the table should be set up in
the desired location to avoid moving it after assembly.
2. Use caution. During all the processes of assembling, especially
when lifting heavy or large parts, pay attention to safety.
3. Tools and Assistance. An adjustable spanner is required for
assembly. It is recommended 2 people assist with assembly.
4. Check all parts before assembling the table, ensure you have
all parts detailed in the parts list on Page 3.
5. Refer to assembly diagram. During assembly, refer to the
assembly instructions on page 3.
6. Caution. Keep children away from work area during assembly.
Do not allow children to handle parts or tools while assembling
your table.
Page 2

ASSEMBLY INSTRUCTIONS
BORDEAUX TEAK BENCH
100% FSC Certified Teak Timber
Spare parts list
Periodically check and make sure all bolts are fully tightened.
Page 3
Part # Description Figure Qty
Part A Bench top 1pc
Part B Bench leg 2pcs
Part C Bolt(M8x65
mm) 2pcs
Part # Description Figure Qty
Part D Bolt(M6x35
mm) 10pcs
Part E Washer 12pcs
Part F Allen Key 1pc
Step 1&2: Place the bench
top(Part A) on a level
surface with bottom
upward. Use bolt(Part C) &
bolt(Part D) and washer
(Part E) to fix the bench
leg(Part B) with the bench
top.
Step 3 & 4 : Same as Step
1&2, fix the other leg with
the bench top.
Tighten all the bolts.
Step 5: Place the bench
upright and it is ready to
use.