Minerva Classic User manual

Minerva Classic
Dryer Chair
Assembly Guide
Please read guide thoroughly to ensure proper setup.
Minerva Beauty, Inc.
2500 Meadowbrook Parkway, Suite D
Duluth, GA 30096
1-888-332-0123
www.MinervaBeauty.com

CLASSIC DRYER CHAIR ASSEMBLY INSTRUCTIONS
1.
Open Box
Remove all pieces from box and
neatly arrange on floor to ensure
no parts are missing.
Please keep all plastic wrapping
and box in good condition in
case product is damaged and
needs to be returned.
2.
Furniture Parts:
Chair Back
Char Seat
2 X Arms
Hardware:
1 x Allen Wrench
4 x Bolts with Washers
6 x Bolts with Cylinder Guides
8 Plugs

3.
Lay back of chair and seat on
side and insert all 4 large bolts
with washers.
Note: Insert bolt with washer
such that bolt head and washer
are inside chair base.
Align bolts with holes on dryer
back and tighten to create a
snug fit between chair and back.
Note: Socket wrench (not
included) may be used to further
tighten arm bolts.
4.
Insert 3 bolts into arm of chair.
The top hole nearest the
"pointed" part of the arms will
not receive a bolt.
After bolts are inserted, turn arm
over and insert cylindrical
guides.
Attach arm to chair and tighten
bolts. Repeat with second arm.
5.
Once arms are attached to chair,
insert plugs so screw heads are
not visible on chair arms.
END OF INSTRUCTIONS