OPERATING THE BLACK AND SILVER PEN WITH MOTION
ACTIVATION 4GB
IMPORTANT NOTICE: Allow the device to charge 4 – 6 hours be ore
using.
HOW TO CHARGE THE PEN
Using the A/C Charger
1. Plug the A/C adapter into a power source such as an outlet
2. If the A/C light is on, then power is being fed to the adapter
• If the light is not on, try a different outlet
3. Connect the USB charging cable to the A/C adapter
4. Make sure the pen is turned off
5. Connect the USB charging cable to the camcorder pen
• The Indicator Light will flash blue while charging
• When the Indicator Light is solid blue, the pen is fully
charged
Using Your PC
1. Plug the USB charging cable into your laptop or desktop PC
2. Make sure the pen is turned off
3. Connect the USB charging cable to the camcorder pen
• The Indicator Light will flash blue while charging
• When the Indicator Light is solid blue, the pen is fully
charged
HOW TO RECORD VIDEO
1. Push the Power / Record Button until the blue light turns on
2. Wait about 3 seconds
3. The green light will start blinking
• The pen is now recording live video
• The green light will blink once every second while
recording
4. Push the Record Button again to stop recording
• The blue light will turn on and remain solid until you
start recording again
NOTICE: I the continuous recording time is more than 60 minutes,
the pen will save the current recording data and then restart video
recording automatically.
HOW TO USE MOTION DETECTION
1. Push the Power/ Record Button until the blue light turns on
2. Wait about 3 seconds
• The light will flash green
3. When the green light starts flashing, push the Power/ Record
Button
• The light will turn blue
• The pen is in st ndby mode
4. Push the Power/ Record Button 4 times
• The blue and green light will turn on
• The pen is in Motion Detection mode
o If no motion is detected, the blue and green
light will blink once every 3 seconds
o When motion is detected, the blue and green
light will blink every second while recording
o When motion is no longer detected, the blue
and green light will blink once every 3 seconds
5. Push the Power/ Record Button to stop recording
• The blue and green light will be solid
6. To exit Motion Detection mode, push the Power/ Record
Button 4 times
• The light will turn blue
• The pen is in st ndby mode
NOTICE: When the disk space is ull, the pen will delete the oldest
video ile in order to make room or the newest video ile.
HOW TO TAKE PHOTOGRAPHS
1. Push the Power/ Record Button until the blue light turns on
2. Wait about 3 seconds
• The light will flash green
3. When the green light starts flashing, push the Power/ Record
Button