Mira 1559.006 User manual

P4297005
Excel Wall and Deck Mounted
Bath Shower Mixers
Installation and User Guide
MODEL NUMBERS
1559.006 1559.007
Important :- Please quote the above model number(s) when ordering spares.
IMPORTANT!
Installer: This manual is the property of the customer and must
be retained with the product for maintenance and operational
purposes.
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

P4297
CONTENTS
DESCRIPTION ......................................................................... 4
SAFETY : WARNINGS ............................................................. 4
DIMENSIONS ........................................................................... 5
SPECIFICATION ...................................................................... 7
Pressures ......................................................................... 7
Plumbing Connections ..................................................... 7
INSTALLATION ......................................................................... 8
Before You Begin ............................................................. 8
Install the Mixer (Deck Mount) ......................................... 9
Install the Mixer (Wall Mounted ) ...................................... 11
Install the Parking Socket ................................................. 13
Finish the Installation ....................................................... 16
User Operation ................................................................. 17
User Operation Shower Fittings ....................................... 18
USER MAINTENANCE ............................................................ 19
Cleaning ........................................................................... 19
Spray Plate Assembly — External ................................... 19
Spray Plate Removal ....................................................... 20
Spray Plate Assembly — Internal .................................... 21
Nozzle Ring Replacement ............................................... 22
Spray Plate Installation .................................................... 23
SPARE PARTS ......................................................................... 24
NOTES ..................................................................................... 26
CUSTOMER SERVICE ............................................................ 28
Guarantee of Quality (Brassware) .................................... 28
To contact us: .................................................................. 28
2
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

P4297
After Sales Service .......................................................... 28
Spare Parts ...................................................................... 28
3
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

P4297
DESCRIPTION
The Excel bath/shower Mixers are single control lever operated mixers for
baths. They can be either wall or deck mounted.
SAFETY : WARNINGS
Miraproductsareprecision-engineeredandshouldgivecontinuedsuperior
and safe performance, provided:
1. They are installed, commissioned, operated and maintained in
accordance with the recommendations given in this Manual.
2. Periodic attention is given, as necessary, to maintain the product in
good functional order. Recommended guidelines are given in the
MAINTENANCE section.
Carefully inspect the new fixture for any signs of damage.
When installing Mira Products, manufacturers guidelines for power tool
safety should be followed.
4
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

P4297
DIMENSIONS
P4297010
1/2" BSP 1/2" BSP
Wall Mounted BSM
5
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

P4297
P4297020
180 mm
1/2" BSP
164 mm
3/4" BSP
69 mm
3/4" BSP
Deck Mounted BSM
6
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

P4297
SPECIFICATION
Pressures
The minimum recommended operating pressure is 1.0 bar to enable
correction of the bath shower divertor.
Plumbing Connections
Hot (H) and Cold (C) inlets must be connected to the correct inlet supplies.
7
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

P4297
INSTALLATION
Before You Begin
1. Turn off the water supply.
2. The plumbing installation must comply with Water Supply
Regulations/Bye-laws (Scotland), Building Regulations or any
particular regulations and practices, specified by the local water
company or water undertakers. The installation should be carried out
by a plumber or contractor who is registered with, or is a member
of an association such as:
Institute of Plumbing (IOP), throughout the UK.
National Association of Plumbing, Heating and Mechanical Services
Contractors (NAPH & MSC), England and Wales.
Scottish and Northern Ireland Plumbing Employers’ Federation
(SNIPEF), Scotland and Northern Ireland.
3. Install the mixer before installing the bath (except wall mount).
4. Before installation carefully inspect the new fixture for any signs of
damage.
8
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

P4297
Install the Mixer (Deck Mount)
P4297030
Pillar
Connectors Mixer Assembly
Seal
1. Position the seals into the mounting nuts on the back of the mixer.
2. Screw the two pillar connectors into the mixer hand tight.
9
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

P4297
P4297040
Apply
Sealant
Sealing
Plate
Washer Locknut
3. Place the sealing plates over the threaded section of the column
connectors.
4. Apply a ring of sealant in accordance with the manufacturer’s
instructions underneath the sealing plates.
5. Fit the mixer through the top of the bath.
6. Install the washers and the locknuts. Use a tap spanner to tighten the
nut.
7. Remove any excess sealant.
10
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

P4297
Install the Mixer (Wall Mounted )
Note! When wall mounting the mixer it should be noted that the product
is supported by the pipework only.
1. Make sure the hot and cold mains supply are turned off. Install the
connectors in the wall and connect to the hot and cold supply (hot
supply to left, cold supply to right).
P3911150
150mm
Spirit Level
2. Make sure that the connectors are leveland set at the correctdistance
apart.
P4297050
Seal Mixer
3. Position the seals into the mounting nuts on the back of the mixer.
11
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

P4297
P4297060
Spanner
Caution! Risk of product damage. Make sure you protect the chrome
plated surfaces when you tighten the nuts.
4. Align the mixer and connectors and tighten the nuts using a suitable
spanner.
12
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

P4297
Install the Parking Socket
P4302270
Top Half of Parking
Socket
Wall Plugs Fixing Screws
1. Decide on a suitable location for the parking socket avoiding buried
cables and pipes.
2. Hold the top half of the parking socket on the wall and mark the
positions of the fixing holes.
3. Drill the 8 mm holes for the fixing screws and insert the wall plugs
(supplied).
Note! Alternativelyuseproprietarycavityfixingsfordrylined,studpartition,
shower cubicle or laminated panel walls.
4. Secure the top half of the parking socket on the wall with the fixing
screws (supplied).
13
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

P4297
P4302280
Bottom Part of
Parking Socket
5. Clip the bottom part of the parking socket over the top part of the
parking socket.
6. Attach the hose to the adjustable handset and the bath shower mixer.
14
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

P4297
P4302260
Parking Socket
Adjustable Handset
7. Park the handset assembly in the parking socket.
15
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

P4297
Finish the Installation
1. Install the bath and drain (refer to the manufacturer’s instructions).
2. Connect the supply hoses to the water supply.
3. Connect the drain body to the drain outlet.
P4297070
4. Make sure that the mixer lever is set in the off position (see User
Operation).
5. Turn on the hot and cold water supply and check for leaks from both
the mixer.
6. Remove the aerator from the spout.
7. Turn on the mixer lever and push lever as far to the left (hot water) and
to the right (cold water) as possible, to remove any debris with a strong
flow of water. Check for leaks from both the mixer and the drain.
8. Position the mixer lever to the off position.
9. Re-install the aerator.
10. Connect the shower fittings to the outlet connector.
16
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

P4297
User Operation
P4297080
ON
OFF
HOT COLD
Pull 'DOWN' to divert
water to shower
17
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

P4297
User Operation Shower Fittings
1. The handset has four different spray settings (start, soothe, force and
eco).
P4302290
b`l
To access the eco setting, turn the spray
plate fully clockwise.Water will flow from
the outer set of holes and the flow rate
will be reduced.
pq^oq
To access the start setting, turn the spray
plate anticlockwise until it 'Clicks' (one click
from the eco setting).Water will flow from
the outer set of holes.
pllqeb
To access the soothe setting, turn the spray
plate anticlockwise until it 'Clicks' (two clicks
from the eco setting).Water will flow from
the large diameter holes.
clo`b
To access the force setting, turn the spray
plate anticlockwise until it 'Clicks' (three clicks
from the eco setting).Water will flow from
the inner set of holes.
18
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

P4297
USER MAINTENANCE
Cleaning
Caution! Risk of product damage. Many cleaners contain abrasive and
chemical substances, and should not be used for cleaning stainless steel,
enamel, plated or plastic fittings. These finishes should be cleaned using
a mild washing up detergent or soap solution, rinsed and then wiped dry
with a soft clean cloth.
Regularly dismantle and clean the aerators to keep water flow regular.
Spray Plate Assembly — External
P4302200
1. Use your thumb or a soft cloth to wipe any limescale from the soft
rubber nozzles and the front face of the spray plate assembly.
19
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

P4297
Spray Plate Removal
Handset Body
Assembly
Inner Nozzle
Ring Retainer
Outer Nozzle
Ring Retainer
Spray Plate
Assembly
Adjuster Ring
P4302220
1. Turn the adjuster ring fully clockwise.
2. Unclip and remove the adjuster ring.
3. Unscrew the spray plate assembly in an anticlockwise direction. The
’O’ seals will provide some assistance.
4. Remove the inner and outer nozzle retaining rings.
20
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk