Mira Flight Wall User manual

11103014-W2-E
These instructions are to be left with the user
Installation and User Guide
MIRA FLIGHT WALL

2
1103014-W2-E
INTRODUCTION
Thank you for purchasing a quality Mira product. To enjoy the full potential of your
new product, please take time to read this guide thoroughly, having done so, keep
it handy for future reference.
Mira Modular Wall Panels
Mira Modular wall panels provide a fast, easy to install, low maintenance, durable
and leak free wall panel system. The modular wall panels have been designed to
suit most standard shower trays and over the bath installations.
Guarantee
For domestic installations, Mira Showers guarantee the Mira Flight Wall Panel
against any defect in materials or workmanship for a period of ten years from the
date of purchase.
For non-domestic installations, Mira Showers guarantee the Mira Flight Wall
Panel against any defect in materials or workmanship for a period of ve year from
the date of purchase.
For terms and conditions refer to the back cover of this guide.
Recommended Usage
Domestic ü
Light Commercial ü
Heavy Commercial ü
Healthcare ü
Patents
Patent Applications:
UK: 0720 339.1
World: PCT/GB2008/003518
DIMENSIONS
Product Width Height Depth
Flight Wall Panel 760 735 mm 2010 mm 8.0 mm
Flight Wall Panel 800 775 mm 2010 mm 8.0 mm
Flight Wall Panel 900 875 mm 2010 mm 8.0 mm
Flight Wall Panel 1200 1175 mm 2010 mm 8.0 mm
Bath Panel 2010 mm 500 mm 8.0 mm
Basin Splashback 600 mm 250 mm 8.0 mm
Nominal Tile Size 200 mm 250 mm 8.0 mm

31103014-W2-E
IMPORTANT SAFETY INFORMATION
Warning!
1. Products manufactured by Mira are safe and without risk provided they are
installed, used and maintained in good working order in accordance with our
instructions and recommendations.
2. When handling or cutting the wall panels, protective equipment should be
worn, P2 Rated Dust Mask, Safety Spectacles Approved to EN 166 and Ear
Protection required when noise levels exceeds 85dBA.
Caution!
1. Before Installing read all of these instructions.
2. Follow all warnings, cautions and instructions contained in this guide.
3 When this product has reached the end of its serviceable life, it should be
disposed of in a safe manner, in accordance with current local authority
recycling, or waste disposal policy.
Important! Carefully unpack and check the size. Check for transit damage and
report any faults immediately to your supplier. No claims for the above will
be considered after installation.
INSTALLATION REQUIREMENTS
Installation must be carried out in accordance with these instructions, and must be
conducted by designated, qualied and competent personnel.
1. Panel to be stored upright or at.
2. Walls must be clean, dry and free from dust and in accordance with adhesive
manufacturers instructions.
3. Before installing the wall panels, make sure that the shower tray or bath is
level.
4. If the panels need cutting or trimming we recommend using a circular saw. The
blade should have a minimum 80 teeth or a jigsaw with a grit edged tungsten
carbide blade (rough).
5. The corner extrusion can accommodate 7 mm of misalignment.
6. We recommended a good quality strong adhesive such as Evostik Serious
Stuff, Unibond No More Nails or similar equivalent.
7. We recommend using bathroom quality silicone sealant containing an
anti-microbial additive.
Caution! Care should be taken to protect wall panel corners from damage.
Caution! When installing the wall panels, care should be taken not to damage
the shower tray or bath.

4
1103014-W2-E
x6
x6
1
2
Installing a Single Corner Extrusion (Shower Tray Installation)
INSTALLATION
Read the section: Installation Requirements before proceeding with the
installation.
Silicone
Sealant
UPSTAND NO UPSTAND
Silicone
Sealant
Silicone
Sealant
Or
No.6 x 25
Countersunk
Head Self
Tapping Screw
1
2

51103014-W2-E
3 mm
NO UPSTAND
3 mm
UPSTAND
3 mm Spacers
Remove the 3 mm spacers once adhesive has cured and seal around the
edge with silicone sealant.
Silicone Sealant
Adhesive
Note! The circular pattern
of adhesive creates a
suction effect when the
ight wall is pushed at
onto the wall.
Cut any holes required for pipework. Seal the edges around the holes with
silicone sealant. Apply the silicone sealant around the edge of the wall
panel.
3
4
5

6
1103014-W2-E
Installing a Two Corner Extrusion (Shower Tray Installation)
Measure the size of the alcove.
Cut the ight wall panels to size, cut any holes required for pipework
and seal the edges around the holes with silicone sealant.
Note! The wall panels can be
cut or trimmed to size.
Or
Warning! When handling
and cutting the wall panels
Safety Equipment should
be worn.
Equipment Required
P2 Rated Dust Mask.
Safety Spectacles
Approved to EN 166.
Ear Protection required
85dBA.
1
2

71103014-W2-E
x3
x3
Silicone
Sealant
Silicone
Sealant
Adhesive
Silicone
Sealant
Corner
Extrusion
Drill 3 holes in each of the corner extrusions for the No.6 x 25 countersunk
head self tapping screws.
Corner
Extrusion
Apply the silicone sealant to the corner extrusion and around the edge of
the wall panel.
Corner
Extrusion
3
4

8
1103014-W2-E
NO UPSTAND
3 mm
3 mm
UPSTAND
Silicone
Sealant
3 mm Spacers
UPSTAND
NO UPSTAND
Silicone
Sealant
6
5

91103014-W2-E
NO UPSTAND
3 mm
3 mm
UPSTAND
Silicone Sealant
Silicone
Sealant
Adhesive
Remove the 3 mm spacers
once adhesive has cured and
seal around the edge with
silicone sealant.
7
8

10
1103014-W2-E
Joining
Strip
Cut the bath panels and joining
strip to size.
Warning! When handling and
cutting the wall panels Safety
Equipment should be worn.
Equipment Required
P2 Rated Dust Mask.
Safety Spectacles Approved
to EN 166.
Ear Protection required when
noise levels exceeds 85dBA.
Installing The Bath Panel
Prepare panels with adhesive
and silicone sealant as previous
installations.
Apply silicone sealant to one
edge of the joining strip and
install onto the wall panel.
Or
Note! Drilling and installing wall
screws on the joining strip is
optional.
No.6 x 25
Countersunk
Head Self
Tapping Screw
1
2
3

11 1103014-W2-E
MAINTENANCE
Cleaning
Many household cleaners contain abrasives and chemical substances, and should
not be used for cleaning the wall panels. It is advised that the wall panels are cleaned
immediately after use to remove any insoluble products. The wall panels should be
cleaned with hot soapy water and then the wall panels should be wiped dry using
a soft cloth.
The acrylic ABS surface of the wall panels has good resistance properties to acids
but should not come into contact with alkalis or organic solvents, such as caustic
soda, dry cleaning agents and paint strippers.
ACCESSORIES
1.1669.085.1.0 Corner Extrusion
1.1669.097.1.0 Wall Panel Joining Strip
6.1669.042.1.0 Fixing Kit
Installing Sink Splashback Panel
Prepare the sink splashback as
panels and install as previous
installations.
Install the wall panels as
previous installations.
Apply silicone sealant
to the joining strip and
install the bath panel.
Silicone
Sealant
Silicone
Sealant
4
5
1

12
1103014-W2-E © Kohler Mira Limited, July 2013
Mira is a registered trade mark of
Kohler Mira Limited.
The company reserves the right to alter
product specifi cations without notice. FM 14648
Guarantee
Your product has the benefit of our manufacturer’s
guarantee which starts from the date of purchase.
To activate this guarantee, please return your completed
registration card, visit our website or free phone 0800
0731248 within 30 days of purchase (UK only).
Within the guarantee period we will resolve defects in
materials or workmanship, free of charge, by repairing or
replacing parts or product as we may choose.
This guarantee is in addition to your statutory rights
and is subject to the following conditions:
● The guarantee applies solely to the original installation
under normal use and to the original purchaser only.
The product must be installed and maintained in
accordance with the instructions given in this user
guide.
● Servicing must only be undertaken by us or our
appointed representative. Note! if a service visit
is required the product must be fully installed and
connected to services.
● Repair under this guarantee does not extend the original
expiry date. The guarantee on any replacement
parts or product ends at the original expiry date.
● For shower fi ttings or consumable items we reserve
the right to supply replacement parts only.
The guarantee does not cover:
● Call out charges for non product faults (such as
damage or performance issues arising from incorrect
installation, improper use, inappropriate cleaning,
lack of maintenance, build up of limescale, frost
damage, corrosion, system debris or blocked fi lters)
or where no fault has been found with the product.
● Water or electrical supply, waste and isolation issues.
● Compensation for loss of use of the product or
consequential loss of any kind.
● Damage or defects caused if the product is repaired
or modifi ed by persons not authorised by us or our
appointed representative.
● Routine maintenance or replacement parts to
comply with the requirements of the TMV 2 or TMV
3 healthcare schemes.
● Accidental or wilful damage.
● Products purchased ex-showroom display.
What to do if something goes wrong
If your product does not work correctly refer to this
manual for fault diagnosis and check that it is installed
and commissioned in accordance with our instructions.
If this does not resolve the issue, contact us for help
and advice.
Extended Guarantees
A selection of protection plans are available that
enable you to cover repair bills (excludes Eire). Ring
01922 471763 for more details.
01 531 9337
Mira Customer Services Dept, Cromwell
Road, Cheltenham, Gloucestershire, GL52
5EP
Helpdesk Service - Ring our Customer
Services Te am for product advice, to purchase
spare parts or accessories or to set up service
visit. You can contact us via phone or e-mail,
details below. Please provide your model
name, power rating (if applicable) and date
of purchase.
Mira Showers Website (www.mirashowers.
co.uk)
Visit our website to register your guarantee,
download user guides, diagnose faults,
purchase our full range of accessories and
popular spares, or request a service visit.
Spares and Accessories - We hold the largest
stocks of genuine Mira spares and accessories.
Contact us for a price or visit our website to
purchase items from our accessory range and
popular spares.
Service/Repairs - No one knows our products
better than our nationwide team of Service
Technicians. We can carry out service or repair
work to your product both during and after the
guarantee period. Ask about our fi xed price
service repairs.
To Contact Us: UK
CUSTOMER SERVICE
E-mail: Visit www.mirashowers.co.uk/
contactus
To Contact Us: Eire Only
0844 571 5000
Fax: [phone]
E-mail: CustomerServiceEire@
mirashowers.com