Mircom BC-160 User manual

BC-160 Battery Cabinet - Installation Instruction
The BC-160 Battery Cabinet it comes complete with a lockable bottom hinged door that opens downwards to allow access
to the battery compartment.
&Place the BC-160 Cabinet in a clean, dry, vibration-free area, a minimum of 6" below the Fire Alarm Control Panel it
is being used with.
&Align the BC-160 Cabinet and Control Panel knock-outs so as to simplify conduit installation.
&Mount the BC-160 Cabinet, using the 6 pre-drilled mounting holes, to the wall.
&Connect the BC-160 Cabinet to the Control Panel cabinet with conduit between the adjacent knock-outs.
Note: Door not shown / All dimensions in Inches
LT-589, Rev-1
Feb. 2006

WARRANTY
MIRCOM Technologies Ltd., manufactured equipment is guaranteed to be free of defects in material
and workmanship for a period of one (2) year from the date of original shipment. MIRCOM will repair or
replace, at its option, any equipment which it determines to contain defective material or workmanship.
Said equipment must be shipped to MIRCOM prepaid. Return freight will be prepaid by MIRCOM. We
shall not be responsible to repair or replace equipment which has been repaired by others, abused,
improperly installed, altered or otherwise misused or damaged in any way. Unless previously contracted
by MIRCOM, MIRCOM will assume no responsibility for determining the defective or operative status at
the point of installation, and will accept no liability beyond the repair or replacement of the product at our
factory authorized service depot.
Head Office: U.S.A. Distribution Centre:
MIRCOM Technologies Ltd. MIRCOM Technologies Inc.
25 Interchange Way 60 Industrial Parkway PMB 278
Vaughan, Ontario Cheektowaga, New York
Canada L4K 5W3 U.S.A. 14277
Tel.: [phone] Tel.: [phone]
Fax: [phone] Fax: [phone]
email: [e-mail] Web Site: http://www.mircom.com