Version 2 UL Listed TX3-CX Card Access System Installation Manual 5
LT-6906 Copyright 2019
List of Figures
Figure 1 Basic Card Access System 9
Figure 2 Card Access System using an RS-485 network 9
Figure 3 Card Access System using an Ethernet TCP/IP
network 10
Figure 4 Card Access System using both Ethernet and RS-485
networks 11
Figure 5 Enclosure dimensions for TX3-CX-2-A 27
Figure 6 Enclosure dimensions for TX3-CX-4-A, TX3-CX-6-A,
TX3-CX-8-A 28
Figure 7 Installation of the controllers in the TX3-CX-4-A, TX3-
CX-6-A, TX3-CX-8-A enclosure 29
Figure 8 Inside the TX3-PS24-5A enclosure 30
Figure 9 TX3-PS24-5A voltage selection switch 31
Figure 10 TX3-PS24-5A enclosure dimensions 32
Figure 11 Controller board connection locations 35
Figure 12 IP module board location 36
Figure 13 TX3-USB-AD board location 37
Figure 14 Controller board battery wring 38
Figure 15 Modem board location 39
Figure 16 Modem module telephone connectors 40
Figure 17 Controller board power supply 41
Figure 18 TX3-PS24-5A terminal block wiring 42
Figure 19 RS-485 Wiring for TX3-CX-2-A 44
Figure 20 RS-485 Wiring for TX3-CX-4-A 44
Figure 21 RS--485 Wiring for TX3-CX-6-A 45
Figure 22 RS-485 Wiring for TX3-CX-8-A 45
Figure 23 Controller board input terminals 46
Figure 24 Input terminal sample connections 46
Figure 25 Input - supervised for open 48
Figure 26 Input - supervised for short 48
Figure 27 Input - supervised for open and short 49
Figure 28 Controller output terminal sample connections 51
Figure 29 Outputs 7 and 8 sample connections 52
Figure 30 Controller board card reader connectors 53
Figure 31 Location of jumpers JW1 to JW8 and switches SW1
and SW2 55
