miseno MM3030LED27K User manual

MODELS:
MM3030LED27K/60K | MM3636LED27K/60K
LED LIGHTED MIRROR
USER GUIDE

IMPORTANT SAFETY INFORMATION
WARNING
This product must be installed in accordance with the installation instruction by
qualified technician. Failure to follow instruction could result in death or serious
bodily injury.
Please read through this installation instruction so you will know how to install
and operate your model properly. Keep this document in a safe place for future
reference after use.
CAUTION
This product must be serviced by qualified personnel. ALWAYS unplug the power
cord or turn off the circuit breaker before service.
PACKAGE CONTENTS
2
(x1)
(x1)
Mirror
Mounting Bracket Screw Drywall Anchor
(x4) (x4)
Customer Service: 855.480.2915 | [email protected]

INSTALLATION
For drywall installation,
mark the hole locations and
drillɌ6mm holes for the
drywall anchors.
Insert provided drywall
anchors.
Install the mounting bracket.
Connect to 110V power
supply.
Hang the mirror to the wall and
make sure the bracket in the
back of the mirror lineup with
the mounting bracket properly.
Press the mirror down
slightly and make sure the
brackets fit properly.
3
•Using the wall studs to hang the mirror is highly recommended.
Customer Service: 855.480.2915 | [email protected]

INSTALLATION DIMENSIONS
Model# A B C
MM3030LED27K/60K 30 30 1 5/8
MM3636LED27K/60K 36 36 1 5/8
4
Customer Service: 855.480.2915 | [email protected]
A
B
C

BASIC OPERATION
5
Customer Service: 855.480.2915 | [email protected]
1. Touch switch
a. Press the switch once to turn on/off the LED lights.
b. When the lights are on, press and hold the switch for about 3 seconds
to change the color temperature.

CARE AND MAINTENANCE
6
WARRANTY
DEFECTIVE GOODS CONSUMER WARRANTY
SHORTAGE OR DAMAGED PRODUCTS
RETURN NEW GOODS
Customer Service: 855.480.2915 | [email protected]
Clean the mirror with a soft, damp cloth and dry thoroughly with a soft towel. Do NOT
allow the edges of the mirror to get or remain wet over a period of time. Please do NOT
use glass cleaner that contains ammonia or vinegar. Never spray any cleaner directly onto
a mirror. Instead apply the cleaner to a soft cloth and then wipe the mirror. Make sure no
commercial cleaner comes in contact with the edge or backing.
Miseno inspects all of its products prior to shipment. We offer a 5-year Limited warranty
on our electric mirror products. Defective products should be returned to place of
purchase for replacement. However, if this is not possible, we accept returns on defective
product with our written authorization. Returns will be handled by product replacement.
Defects or damage caused to the product by the consumer do not qualify for warranty
replacement.
All shipments are carefully inspected and counted before leaving our distribution centers.
Please inspect carefully on receipt of merchandise, noting any discrepancy or damage
on the carrier’s freight bill at that time, and file a claim with the carrier within 10 days
from receipt of order. Then contact our office. Deductions from invoices for shortages
or damage claims will not be allowed.
All claims for returns or adjustments must have prior approval and return
authorization (RMA) number. Only original, sealed product in salable condition are
eligible for a general return. Credit for authorized general returns will be issued at
the net price paid for the product and may be subject to a 15% restocking/handling
fee. Merchandise is to be returned via prepaid freight. All unauthorized returns will
be refused or subject to a 25% restocking/handling fee.

REPLACEMENT PARTS
7
Customer Service: 855.480.2915 | [email protected]
Part Description
1 SS Frame
2 Mirror
3Aluminum
Frame - Inner
5
6
Sensor Switch
7
LED Driver
8
Sensor Switch
Driver
9
Galvanized Plate
EVA Ring -
Outer
EVA Ring -
Inner
4
Part Description
10 LED Strip
11 Cover Plate
12 Mounting
Bracket