MISURA P23CM27BFA01B User manual

USER MANUAL ENGLISH
MISURA MONITOR 27″ FLAT
Model: P23CM27BFA01B – 240 Hz
240 Hz refresh
frequency
178°
Ultra Wide
Viewing Angle
HDR
High Dynamic
Range
1080
Full HD resolution
1920×1080
VA Flat
panel
VA
Moving Picture
Response Time
1 ms
FreeSync & G-Sync
Technology
Low Blue Eyes
Technology

Dear Customer,
Thank you for having purchased this product. This document describes
how to install and use the LCD colour monitor. Read this manual which
contains information for correct, safe use carefully. Keep this manual at
hand so that you can refer to it when needed.
Product description and type of use.
The LCD color monitor presents avery rugged structure. It is designed for
continuous operation and can be used in closed circuit TV systems without
risks of excessive fatigue. The Flat Panel Display has an active matrix, thin-
film transistor (TFT), liquid crystal display (LCD).
General features
 Display area
 Wall mounting with not included bracket
 One composite two DP, two HDMI
 Wide inclination to allow viewing either from aseated position or
standing up and when moving from one position to the other
Multilingual OSD menu for easy setting and optimization of the display.
Opening the box
Check that the packing and the contents are not visibly damaged. Contact
the retailer immediately if parts are either missing or damaged. Do not
attempt to use the device in this case. Send the product back in its original
packing if it is damaged.
Contents of the box
 LCD monitor
 Power Adaptor
 Power cable
 DP cable
 User‘smanual
Important Note: Accessories may be changed without prior notice.
GENERAL INFORMATION

EN
Power
 Only use the power unit provided to power the device.
Check mains rating before plugging the power unit in.
 Do not pull the cable to unplug the device.
Safety precautions
 Keep the device away from rain and humidity to prevent risk of fire and
electrocution. Do not introduce material (solid or liquid) inside. If this
should accidentally occur, disconnect the device from the mains and have
it inspected by qualified personnel.
 Never open the device. In all cases, contact the qualified personnel or
authorized service center for repairs.
 Keep the device away from children, to prevent accidental damage.
 Do not touch the device with wet hands to prevent electrical shock
or mechanical damage.
 Do not use the device if it should fall or the external casing is damaged.
Risk of electrocution if the device is used in such conditions. Contact the
retailer or authorized installer.
 It is advisable to disconnect the power wire if the monitor is not used for
acertain time.
Installation precautions
 To prevent overheating the device, arrange it in aposition allowing the
flow of air through the slots in the casing. Ensure at least 5 cm of free
space when installing inside arack. For the same reason, do not install
sources of heat, such as radiators or hot air ducts. Keep away from direct
sunlight. Do not install in areas subject to excessive dust, mechanical
vibrations or shocks.
 Do not arrange this device on an unstable surface, such as atottering or
slanted table. The device could fall causing injury or mechanical failures.
 Do not install the device in aplace where it could be exposed to humidity
or water. Do not direct ajet of water onto the device: risk of fire, electrocu-
tion or mechanical failure.
 Stop using the device if water or other material should penetrate inside:
risk of fire and electrocution. Contact the retailer or authorized installer.
 Slots and openings in the cabinet are provided for ventilation.
These openings must not be blocked or covered.
WARNINGS

 Do not place heavy or heat generating objects on top of the device: this cou-
ld damage the casing and/or increase internal temperature causing faults.
 Do not cover the device with acloth while it is running to prevent
deforming the external casing and overheating the internal parts:
risk of fire, electrocution and mechanical failure.
 Keep magnets and magnetized objects away from the device
to prevent faults.
 Do not use the device in presence of smoke, vapor, humidity, dust
or intense vibrations.
 Wait for awhile before operating adevice immediately after transporting
it from acold place to awarm place and vice versa. Wait on average
for three hours: this will allow the device to adapt to the new ambient
(temperature, humidity, etc.).
 The monitor is provided with aplastic base and rubber feet. It can be
positioned on ahorizontal surface, such as adesk or atable. Make sure
that the device is fastened firmly and that it is not resting on unstable
supports or surfaces. Dropping could cause severe injury and damage
the device.
 Remember to adjust the brightness and contrast to obtain
aperfect image.
 The monitor can also be installed on the wall by means of abracket
(not provided).
1.3.4 Cleaning the device
 Rub delicately with adry cloth to remove dust and dirt.
 Dip the cloth in neutral detergent if dirt cannot be eliminated with adry
cloth alone.
 Do not use volatile liquids (such apetrol, alcohol, solvents, etc.) or
chemically treated clothes to clean the device to prevent deformation,
deterioration or scratches to the paint finish.
1.3.5 Privacy and copyright
 The LED monitor is adevice for Gaming. Recording of images is subject
to the laws in force in your country. Recording of images protected by
copyright is forbidden.
Product users shall be responsible for checking and respecting all local
rules and regulations concerning monitoring and recording video signals.
The manufacturing SHALL NOT BE LIABLE for use of this product not in
compliance with the laws in force.

EN
MONITOR INPUTS
ACCESSORIES
1 | Power ( 12V, 4A )
2 | HDMI 1
3 | HDMI 2
4 | DP 1
5 | DP 2
6 | AUDIO OUT
1 | 27 inch monitor
2 | Stand
3 | DP/HDMI cable
4 | Pawer adaptor and power cable
5 | User Guide
INITIAL SETUP
Connect the monitor to apower outlet.
1 | Press the POWER button on the monitor
or to turn it on (The indicator will be blue).
2| Connect the relevant cable to the
corresponding input on the monitor.
The source will be automatically detected.
3| To change between inputs, press the
“Source” button to enter the source menu.
Use the “” and “” buttons to choose
the input source between Auto Select,
DP1,DP2 and HDMI.
DP2
DP1
HDMI 2
HDMI 1

1
2
3
4
5
MONITOR BUTTONS
MENU OPTIONS
1Open the Main OSD Menu and Select submenu
2Go Down on the Main OSD Menu Decrease the value
of aselected item
3Go Up on the Main OSD Menu Increase the value
of aselected itemI
4Select signal source or Exit OSD
5Turn the monitor on or Of f
The menu for the monitor can be accessed by pressing the menu button
on the control panel. This menu is separated into the following sub menus:
Picture Settings, Image Settings, Colour Temperature, OSD Settings, Reset,
and Miscellaneous options, details of each menu can be found in the
following section.

EN
OSD MENU
Input Source
Switch the signal input to DP2, DP1, HDMI2, HDMI1, or have the monitor
Auto Select the source.
1920x1080@240Hz
Setting
Setting
DP2
DP2
DP1
HDMI2
HDMI1
Input source
OSD
OSD
Language Change the OSD Menu display language.
OSD H Position Change the horizontal position of the OSD Menu.
OSD VPosition Change the vertical position of the OSD Menu.
OSD Transparency Change the transparency value of the OSD
Menu from 0 to 100.
OSD Timer Out Change how long the OSD Menu is on before
it automatically exits.
OSD Rotation Rotate the OSD Menu.

Color Setting
Display
Setting
Setting
Aspect Ratio
DP2
4:3
Display
Color Setting
Gamma Change the display Gamma value to: 2.0,2.2,2.4.
Pirture Mode Change the pre-set mode to: Standard, Photo,
Game, Movie, RTS or FPS.
Color
Temperature
Change the color temperature to:
Normal, Warm, Cool, User.
Hue Change the display Hue value from oto 100.
Saturation Change the display Saturation value from 0 to 100.
Low Blue Light Change the display Saturation value from 0 to 100.
Ratio Change the image aspect ratio to Full Screen, Auto,
4:3, 5:4, or 1:1.

EN
Audio
Picture Quality Setting
Picture Quality Setting
Audio
Sharpness Change the display Sharpness value from 0 to 100.
Response Time Select the Response Time Value from, Low, Middle,
High or turn it Off.
Noise
Reduction
Select the Noise Reduction Value from, Low, Middle,
High or turn it Off.
Super
Resolution
Select the Super Reduction Value from, Low, Middle,
High or turn it Off.
Dynamic Luminance
Control
Turn the Dynamic Luminance Control
feature On or Off.
Mute Turm On or Off to mute the audio source.
Volume Change the audio source volume from 0 to 100.

Other
Other
FreeSync Mode Turn FreeSync On or Off.
HDR Turn HDR On (requires HDMI 2.0 input).
MPRT On or Off.
Flicker Free On or Off.
LightEffect On or Off.
Reset Press this function to restore the original settings.
Brightness/Contrast
1920x1080@240Hz
Setting
Setting
Brightness
DP2
Contrast
DCR
80
50
Off
Brightness/Contrast
Brightness Change the display brightness value from 0 to 100.
Contrast Adjust the display contrast value from 0 to 100.
DCR Turn the Dynamic Contrast Ratio feature On or Off.

EN
P23CM27BFA01B – 240 Hz
1920 × 1080
240 Hz
300 cd/m²
MPRT 1 ms
16:9
178° (H) / 178° (V)
16.7
Million Colors (8-bit)
x2
x1
100 × 100 mm
DC 12V, 4A
x2
Panel
In/Out
Resolution
Model
Refresh
Brightness (MAX)
Response Time
Aspect Ratio
27 ” Flat VA Screen Size
Viewing Angle
Display Color
HDMI
DP
Audio
VESA Mount
Power Consumption
Typical 36W
Power Source
Support
Support
Support
Support
Support
Support
Support
Support
Features
HDR
Over Drive
FreeSync/Gsync
Support
Plug & Play
Low BLue Light Mode
Flick free
Support
VESA mount
Speaker
RGB light
Fixed stand
Black
DP cable / Power Supply /
Power cable / User's manual
Cabinet Color
Accessories
TECHNICAL SPECIFICATION

Manuál vČeštině otevřete zde /
Manuál vo Slovenčine otvoríte tu /
Open the English manual from here /
Das Handbuch in Deutsch können Sie öffnen hier /
Amagyar nyelvű kézikönyvet itt tudja megnyitni /
Odprite priročnik vslovenščini tukaj /
Aprire il manuale in italiano qui /
URL: www.misura.shop/en/advisor/manuals-for-download-gaming-monitor-27-
240-hz-flat-p23cm27bfa01b