MISURA 3M101B User manual

PORTABLE DUAL MONITOR FOR LAPTOPS
USER MANUAL
monitor 10.1" 3M101B monitor 11.6" 3M1106D monitor 13.3" 3M1303D
compatible with 13.3"- 16.1"
laptops (with a minimum height of
213 mm for the laptop's own screen)
compatible with laptops 10.1"- 13.3"
(with a minimum height of
178 mm for the laptop's own screen)
compatible with laptops 14 "and larger
(with a minimum height of
230 mm for the laptop's own screen)
PŘENOSNÝTROJITÝMONITOR PRO LAPTOPY
monitor 11.6" 3M1106D monitor 10.1" 3M101B monitor 13.3 " 3M1303D

Copyright © 2020 MISURA Store s.r.o.. All rights reserved.
No part of this manual, including the products and software described in this manual, may be reproduced, transmitted, transcribed,
stored in a data storage system, or translated into any language in any form and by any means, except for documentation stored
by the Buyer for backup purposes without the written permission of MISURA Store s.r.o. (“MISURA”) .
The warranty for the product or service becomes void if: (1) the product is repaired, modied or altered without the written
permission of MISURA or (2) the serial number of the product is illegible or missing.
The technical data and information in this manual are provided for information only, are subject to change at any time without notice,
and should not be construed as a commitment by MISURA.
MISURA is not responsible for any errors or inaccuracies that may appear in this manual, including the products and software
described in this manual.
SAFETY INFORMATION
• Read all supplied documentation carefully before preparing this portable USB monitor for use.
• To reduce the risk of re or electric shock, do not expose this portable USB monitor to rain or moisture.
• Do not attempt to disassemble the cover of this portable USB monitor.
• Before using this portable USB monitor, make sure that all cables are connected properly.
• Avoid extremely dusty environments, changes in temperature and humidity. Do not place the portable USB monitor in areas
where there is a risk of moisture/splashing.
• Do not allow objects or liquids to enter the holes / cutouts on the cover of the portable USB monitor.
• In the event of technical problems with the portable USB monitor, contact a qualied service technician or dealer.
• Do not dispose of this product in a re.
• Do not use this monitor near heating devices or in places subject to high temperatures.
• Keep this monitor away from sharp objects.

NOTICE
Please handle the dual monitor with care to avoid damage.
Do not attempt to rotate the monitors more than shown below.
Right screen 0 - 180 degrees Left screen 0 - 235 degrees
MAXIMUM ANGLE OF ROTATION:

OVERVIEW OF COMPONENTS
INPUTS AND BUTTONS
CABLE SELECTION
ASSEMBLY
DISPLAY CONFIGURATION
INTRODUCTION TO OSD FUNCTIONS
OSD SETTINGS
TECHNICAL SPECIFICATIONS
1
2
3
4
5-6
7
8-10
11
CONTENT

OVERVIEW OF COMPONENTS
Dual monitor
2x MINI HDMI
to HDMI cables
2x USB-C cables
(90 degrees)
2x USB-C
to USB-A cables
VIDEO ONLY VIDEO &POWER
POWER SUPPLY ONLY
1

Thunderbolt 3 / USB-C 3.1 with
DisplayPort (video and power)
Mini-HDMI (video only)
USB-C (power supply only) +
continuous charging
Menu / Input
Increase brightness / Move up menu
Decrease brightness / Move down menu / Back
INPUTS AND BUTTONS
2

INPUTS AND BUTTONS
To determine which cables you will need, rst
identify the ports on your laptop using the images on the right,
or refer to the laptop's user guide.
If your laptop has two Thunderbolt3 / USB-C
with DisplayPorts, the easiest way to use a triple screen
is to use two USB-C to USB-C cables.
If your laptop has no Thunderbolt3 / USB-C
with DisplayPorts you will need to use one USB-A to
USB-C cable and one HDMI to Mini-HDMI cable for each
screen.
If your laptop does not have an HDMI port, you can use any
of the other video outputs shown on the right with a simple HDMI
adapter.
* Some laptops have USB-C ports that do not support
DisplayPort via USB-C.
Read the laptop user guide.
HDMI DisplayPort
Mini-DisplayPort Mini-DVI
VGA USB 3.0
(with HDMI adapter)
USB-A Thunderbolt 3 /
USB-C with Display Port
3

INPUTS AND BUTTONS
1. Remove the dual screen
from the box
4. Release the stand
at the back
of the dual screen
and turn the anchor screw
to adjust the length
5. Use the necessary cables
(listed on the previous
page) to connect the screens
to the laptop. See "Inputs
and Buttons" on page 2
2. Open the two
screens in
in the directions
described in the gure
3. Place the holder
over the back of the screen
and clamp it so that the
dholder covers the edges
and ts on the
laptop screen
1
4

DISPLAY CONFIGURATION
PC / WINDOWS
1.Go to Display Settings (Start > > /
System Settings > Display
2.Tap and drag the screen to view
the conguration
3.If any of the screens are upside down,
click on the icon in the display menu.
Then click on the icon. Select
"Landscape" from the "Orientation"
drop-down menu (inverted)
4.To enlarge the image, click on
"Screen Resolution" to adjust the size
to your requirements
5

DISPLAY CONFIGURATION
MAC
1. Open "System Preferences"
2. Select "Monitors" from the menu
3. In the display menu, click on "Arrangement"
4. Tap and drag the screens to view
the conguration
5. If one of the screens is upside down,
click on the icon to display the menu on that screen
and select "180 degrees"
from the drop-down menu
6. To enlarge the image, click the "Adjusted" switch,
then choose the resolution that suits
you best from the menu
6

1. Activate the OSD menu by pressing the
Menu button " "
2. Press the "+" button to select your setting
3. Press the Menu " " button to conrm
4. Press the "-" button to return to the previous
page
INTRODUCTION TO OSD FUNCTIONS
7

OSD SETTINGS
BRIGHTNESS
CONTRAST
BLACK LEVEL
SHARPNESS:
The setting range is from 0 to 100
The setting range is from 0 to 100
The setting range is from 0 to 100
The setting range is from 0 to 100
Default display settings for various modes
(Standard / Game / Movie / Text /
FPS / RTS modes)
Adjusts the aspect ratio to 4:3 / 16: 9
Select ON or OFF to
enable or disable the dynamic
contrast ratio feature
ECO:
DCR:
ASPECT:
BRIGHTNESS BRIGHTNESS
8

OSD SETTINGS
RED:
GREEN:
BLUE:
COLORTEMP:
The setting range is from 0 to 100
The setting range is from 0 to 100
The setting range is from 0 to 100
Allows you to adjust
each individual RGB color or select
a default Warm or Cool level
Select the OSD language.
You can choose from:
English, French, German,
Simplied Chinese, Italian, Spanish,
Portuguese, Turkish, Polish, Dutch,
Japanese, Korean
Sets the time limit for the monitor
setting menu (10-60 seconds)
Adjusts the transparency
of the monitor settings menu
LANGUAGE:
TRANSPARENCY:
OSD TIMER:
COLOR TEMPERATURE OSD SETTINGS
9

SETTINGS
RESET: Selects RESET to return all settings
to the factory default mode
It contains two signal sources,
USB-C and HDMI
Enables HDR (High Dynamic
Range) when connected to
a compatible device.
Contains three modes (o/
auto / 2084)
Reduces the blue light
content on the display
SIGNAL
SOURCE:
WEAK BLUE
LIGHT:
HDR MODE:
RESET MISC
10

TECHNICAL SPECIFICATIONS
Model designation
ID-3M101B
ID-3M1106D
ID-3M1303D
Panel type
IPS
IPS
IPS
Size
10.1" 11.6“ 13.3”
Backlight type
W-LED System
W-LED System
W-LED System
Brightness
350cd/m2
230cd/m2
220cd/m2
Contrast
800:1
1000:1
1000:1
E
DP YES NO NO
Pitch
0.1128mm (H) x 0.1128mm (V)
0.1335mm(H) x 0.1335mm (V)
0.153mm (H) x 0.153mm (V)
Contrast
1920x1200
1920x1080
1920x1080
Aspect Ratio
16:10 16:9 16:9
Reaction time (typical)
30ms
25ms
25ms
Reaction time (typical)
H:85º,V:85º
(CR>10)
10)
H:89º,V:89º (CR>10)
H:89º,V:89º (CR>10)
LowBlue mode
YES YES YES
HDR10
YES
YES
YES
miniHDMI
1920x1200@60Hz
1920x1080@60Hz
1920x1080@60Hz
T
ype-C
1920x1200@60Hz
1920x1080@60Hz
1920x1080@60Hz
Type-C 2
YES (for power supply only)
YES (for power supply only)
YES (for power supply only)
Headphone input
NO
NO
NO
Speaker
NO
NO
NO
Operational ≤8W Operational Operational ≤8W ≤8W
Stand by ≤0.5W
Stand by ≤0.5W
Stand by ≤0.5W
Power supply
AC 100-240V 50/60Hz
AC 100-240V 50/60Hz
AC 100-240V 50/60Hz
Power adapter
5V /2A
5V /2A
5V /2A
Monitor size
286*182*25
318*215*25mm
357*233*25mm
Weight
0,84kg
1.15kg
1.5kg
HDMI Cacble
YES
YES
YES
Type-C Cacble
YES
YES
YES
Type-C to USB Cacble
YES
YES
YES
User Manual
YES
YES
YES
Compatibility
Windows 7/8/8.1/10/MAC OS
Windows 7/8/8.1/10/MAC OS
Windows 7/8/8.1/10/MAC OS
Consumption
11

• Turn othe monitor and unplug the cable before cleaning. Clean the surface of the monitor with a smooth cloth that does not release bres
does not release bres Resistant stains can be removed with a cloth dampened with a mild detergent designed for cleaning monitors.
Do not use a detergent containing alcohol or acetone. Use only a detergent designed for LCD monitors. Do not spray detergent
directly on the surface of the display, as it may enter the monitor and cause an electric shock.
CLEANING AND MAINTENANCE
• Depending on the desktop background, the brightness of dierent parts of the screen may dier slightly.
• If you display the same image for several hours, it may "burn" into the screen and persist. The display will gradually but slowly
"recover" or turn it ofor a few hours.
IF THE DISPLAY IS BLACK, FLASHING, OR NOT WORKING AT ALL, CONTACT THE SERVICE
OR DEALER FOR REQUEST FOR SERVICING. DO NOT ATTEMPT TO SERVICE IT YOURSELF!
!
THE FOLLOWING SYMPTOMS ARE NORMAL, NOT A DEFECT:

Declaration of conformity
according to the EMC Directive 2014/30 / EC on the harmonization of legal regulations
of Member States related to electromagnetic compatibility. .
Manufacturer / importer:
MISURA Store s.r.o.
KPoště429/2
252 67 Tuchoměřice
Person responsible for completing the technical documentation:
Ing. Jiří Mihel - executive director of the company
Description and identication of machinery:
Title: portable USB monitor
Type: 3M101B, 3M1106D, 3M1303D
The device described above has been tested in accordance with the above standards
and found to comply with the EMC 2014/30/ES. The observations and test results given in
this certicate are only relevant for the test sample.
The product complies with the following European Community regulations:
Directive EN 55032: 2015 of the European Parliament and of the Council
- Electromagnetic compatibility of multimedia equipment - Emission requirements.
Directive EN 55035: 2017 of the European Parliament and of the Council
- Electromagnetic compatibility of multimedia devices - Immunity requirements.
HARMONIZED STANDARDS USED:
IEC 62321-3-1:2013, IEC 62321-5:2013, IEC 62321-4:2013+AMD1:2017,
IEC 62321-7-1:2015, IEC 62321-7-2:2017, IEC 62321-6:2015, IEC 62321-8:2017