MISURA 3M101B User manual

USER MANUAL
PORTABLE DUAL MONITOR
ENGLISH
monitor 10.1“
3M101B
compatible with
laptops 12“ – 13“
(with aminimum height
of 178 mm for the laptop‘s
own screen)
monitor 12“
3M1200S
compatible with
13.3“ – 16.1“ laptops
(with aminimum height
of 210 mm for the
laptop‘sown screen)
monitor 14“
3M1400S
compatible with
15“ – 18“ laptops
(with aminimum height
of 230 mm for the
laptop‘sown screen)
monitor 15“
3M1500S
compatible with
15,5“ – 18“ laptops
(with aminimum height
of 235 mm for the
laptop‘sown screen)
monitor 13.3“
3M1303D
compatible with
laptops 14“ – 17“
(with aminimum height
of 218 mm for the
laptop‘sown screen)

Copyright © 2020 MISURA Store s.r.o. All rights reserved.
No part of this manual, including the products and software described in this manual, may be reproduced,
transmitted, transcribed, stored in adata storage system, or translated into any language in any form and by
any means, except for documentation stored by the Buyer for backup purposes without the written permission
of MISURA Store s.r.o. (“MISURA”).
The warranty for the product or service becomes void if: (1) the product is repaired, modified or altered without
the written permission of MISURA or (2) the serial number of the product is illegible or missing.
The technical data and information in this manual are provided for information only, are subject to change
at any time without notice, and should not be construed as acommitment by MISURA.
MISURA is not responsible for any errors or inaccuracies that may appear in this manual, including the products
and software described in this manual.
SAFETY INFORMATION
 Read all supplied documentation carefully before preparing this portable USB-C monitor for use.
 To reduce the risk of fire or electric shock, do not expose this portable USB-C monitor to rain or moisture.
 Do not attempt to disassemble the cover of this portable USB-C monitor.
 Before using this portable USB-C monitor, make sure that all cables are connected properly.
 Avoid extremely dusty environments, changes in temperature and humidity. Do not place the portable USB-C
monitor in areas where there is arisk of moisture/splashing.
 Do not allow objects or liquids to enter the holes / cutouts on the cover of the portable USB-C monitor.
 In the event of technical problems with the portable USB-C monitor, contact aqualified service technician
or dealer.
 Do not dispose of this product in afire.
 Do not use this monitor near heating devices or in places subject to high temperatures.
 Keep this monitor away from sharp objects.

NOTICE
Please handle dual screen with care and do not press the screens to avoid damage.
Do not exceed its maximum turning angle showing as below:
TURNING ANGLE OF SCREENS:
Left screen (0° – 235°) Right screen (0° – 180°)

OVERVIEW OF COMPONENTS 1
INPUTS AND BUTTONS 2
CABLE SELECTION 3
PROTECTIVE CAP 4
ASSEMBLY 5
CONNECTION METHODS 6–9
DISPLAY CONFIGURATION 10–11
INTRODUCTION TO OSD FUNCTIONS 12
OSD SETTINGS 13–15
TECHNICAL SPECIFICATIONS 16
CONTENT

OVERVIEW OF COMPONENTS
2× USB-C to USB-C
(90–degree) Cables
1× Hook and loop
6× Protective caps
(for fasten
the cables)
2× Mini HDMI
to HDMI Cables
2× USB-C
to USB-A Cables
VIDEO & POWER
VIDEO ONLY
POWER ONLY
1

USB-C Full Functioned Port: Power
Supply, Video Signal Transmission
Mini HDMI Port (No Power Supply):
Video Signal Transmission
USB-C Port (Power Supply Only): Power Supply,
Reverse Charging, Compatible with PD2.0
power supply protocol, Supporting 5-20V
voltage input
Increase the brightness;
Enter the Menu, and press it to turn to the next selection; Increase the value.
Decrease the brightness;
Return to the previous page;Decrease the value.
INPUTS AND BUTTONS
2
BRIGHTNESS +/-
MENU
TYPE-C PORT (Power only)
HDMI
Press the Menu to enter the OSD (On-Screen Display) menu.

To determine which cables you will need, first
identify the ports on your laptop using the images
on the right, or refer to the laptop‘suser guide.
If your laptop has two Thunderbolt3 / USB-C
with DisplayPorts, the simplest way to use MISURA
monitors is with the two USB-C to USB-C
cables provided.
If your laptop has no Thunderbolt3 / USB-C with
DisplayPorts you will need to use one USB-Ato
USB-C cable and one HDMI to Mini-HDMI cable
for each screen.
If your laptop does not have an HDMI port, you can use
any of the other video outputs shown on the right with
asimple HDMI adapter.
CABLE SELECTION
3
HDMI
Mini-DisplayPort
VGA
USB-A
DisplayPort
Mini-DVI
USB 3.0
(with HDMI adapter)
Thunderbolt 3 /
USB-C with Display
Portadapter)
* Some laptops have USB-C ports that do not support
DisplayPort via USB-C. Read the laptop user guide.

PROTECTIVE CAP
4
Using the protective cap if your laptop is an ultra-thin style(laptop screen thickness ≤6mm),
it helps to reduces the shaking.

ASSEMBLY
5
1.
Take the dual
monitor out
of the box.
4.
Lift the stand and pull
the end of the stand
to extend the stand. Press
and hold the button to retract
the stand.
5.
Use the necessary cables
to connect the screens
to the laptop. See „Inputs
and Buttons“ on page 2.
2.
Open the two
screens in
in the directions
described
in the figure.
3.
Place the holder over
the back of the screen
and clamp it well to cover
the edges and fits
on the laptop screen.

CONNECTION METHODS
6
1. Two USB-C or Thunderbolt 3/4 Ports
Notes:
Use the protective cap if your laptop is an ultra-thin style (laptop screen thickness ≤6mm).
It helps to reduces the shaking.
If there are 2 full-functioned Type-C or 2 Thunderbolt 3/4 ports on the laptop, use two included
Type-C cables to connect the laptop to the MISURA monitors.
USB-C USB-C

7
Notes:
1 | Make sure the USB-C of your laptop is a Full-functioned USB-C port
(support both video & data transmission).
2 | Make sure 5V/2A or above power can be supported through USB-C port. An external power
supply of 5V/2A or above is needed for normal use (adjust brightness above 50).
Some USB-C ports may not be able to transmit currents above 5V/2A, please connect an external
power supply to better use the monitor.
USB-C USB-C
USB-C to USB-A
NOTE: it can
be also powered by
other USB-A avalible
on laptop.

CONNECTION METHODS
8
2. One Full Functioned Type-C and HDMI Port Connection
Notes:
The HDMI port does not provide power, so the monitor must be plugged
into the power supply (5V/2A or above).
If there‘s one full functioned Type-C port and one HDMI port on the laptop:
1 | Use the included full functioned Type-C cable to connect one side of the monitor
and the laptop.
2 | Meanwhile, use the HDMI cable and an extra power supply (USB-C to USB-A cord) to connect
the other side of the monitor and the laptop.
USB-C HDMI
USB-C to USB-A
NOTE: it can
be also powered by
other USB-A avalible
on laptop.

9
3. Other Connection Type (Extra Adapter Needed)
Notes:
The HDMI port does not provide power, so the monitor must be plugged
into the power supply (5V/2A or above).
If you lack enough HDMI port for connection:
1 | Find a suitable HDMI hub for your laptop.
2 | First: Connect one side of your monitor to laptop with a HDMI and a USB-C to USB-A cord.
Second: Connect the HDMI hub to your laptop.
Finally, connect the other side of your monitor with another HDMI and USB-C
to USB-A cord
USB-C to USB-AUSB-C to USB-A
HDMI HDMI
HUB NOTE: it can
be also powered by
other USB-A avalible
on laptop.
NOTE: it can
be also powered by
other USB-A avalible
on laptop.

DISPLAY CONFIGURATION – PC / WINDOWS
10
1. Go to Display Settings
(Start > > Settings > System> Display
2. Click and drag screens to configuration shown
3. If you need to set different display modes
for multiple screens, please click 1/2/3 (click the
„Identify“ button down the screen to find the
corresponding screen) and select the one, then
enter into the „Multiple displays“ menu to set
4. If any of the screens are upside down, click
on the screen in the display menu. Then click
on the “Orientation” dropdown menu and select
“Landscape (flipped)”
5. To increase the zoom, click the “Change the size
of text, apps, and other items” dropdown
and select “150 %”
* Keeping three displays sync can be configured in setting of graphic card.
If there is any issue please consult local distributor. Resolution recomended for 10.1“: 1920 × 1200

DISPLAY CONFIGURATION – MAC
11
1. Open „System Preferences“
2. Select “Displays” from the menu
3. Click “Display Settings” from display
menu (Fig. 1)
4. Click monitor name to set Mirror
or Extended display (Fig. 2)
5. Click any display screen in the interface
shown in Fig. 3 to adjust the screen
position.
6. To increase the zoom, click the “Scaled”
radio button.
Fig. 1
Fig. 2
Fig. 3
S19(1)
S19(2)
S19(2)
S19

INTRODUCTION TO OSD FUNCTIONS
12
1. Press the „ „ Menu button to activate
the OSD menu
2. Press the „+„ button to select your
setting
3. Press the Menu „ „ button to confirm
4. Press the „-„ button to return
to the previous page
BRIGHTNESS
BRIGHTNESS
CONTRAST
BLACK LEVEL
SHARPNESS

OSD SETTINGS
13
IMAGE
BRIGHTNESS
BRIGHTNESS The setting range is from 0 to 100
CONTRAST The setting range is from 0 to 100
BLACK LEVEL The setting range is from 0 to 100
SHARPNESS The setting range is from 0 to 100
ECO: Default display settings for various modes
(Standard / Game / Movie / Text / FPS / RTS modes)
DCR: Select ON or OFF to enable or disable the dynamic
contrast ratio feature
ASPECT: Adjusts the aspect ratio to 4:3 / 16: 9 / WIDE

OSD SETTINGS
14
COLOR TEMPERATURE
OSD SETTINGS
COLOR TEMP Allows you to adjust each individual
RGB color or select adefault Warm
or Cool level
RED The setting range is from 0 to 100
GREEN The setting range is from 0 to 100
BLUE The setting range is from 0 to 100
LANGUAGE Select the OSD language. You can choose
from: English, French, German, Simplified
Chinese, Italian, Spanish, Portuguese, Turkish,
Polish, Dutch, Japanese, Korean
OSD TIMER Sets the time limit for the monitor
setting menu (10–60 seconds)
TRANSPARENCY Adjusts the transparency of the monitor
settings menu

OSD SETTINGS
15
MISC
RESET
RESET Selects RESET to return all settings
to the factory default mode
SIGNAL
SOURCE
It contains two signal sources,
USB-C and HDMI
LOW BLUE
LIGHT
Reduces the blue light
content on the display
HDR MODE Enables HDR (High Dynamic Range) when
connected to acompatible device. Contains
three modes (off / auto / 2084)

TECHNICAL SPECIFICATIONS 16
Screen size 10.1 inch 12 inch 13.3 inch 14 inch 15 inch
Adaptive for
laptop panel
Length (left to right)
225 – 328mm Breadth
(top to bottom) > 178mm
Length (left to right)
255 – 372mm Breadth
(top to bottom) > 210mm
Length (left to right)
308 – 427mm Breadth
(top to bottom) > 218mm
Length (left to right)
305 – 425mm Breadth
(top to bottom) > 230mm
Length (left to right)
325 – 450mm Breadth
(top to bottom) > 235mm
Thickness < 7mm Thickness < 7mm Thickness < 8.2mm Thickness < 8mm Thickness < 8mm
Resolution 1920×1200 1920×1080
Panel Type IPS
Contrast 1000:1
Power Normal/
Standby ≤8W / ≤0.5W
Brightness 350 cd/m2 230 cd/m2 230 cd/m2 250 cd/m2 250 cd/m2
View angle H:85º, V:85º (CR>10)
Pitch 0.1128mm(H) × 0.1128mm (V) 45.7um(H)×137.1um(V) 0.1529mm(H) × 0.1529mm (V) 0.1335mm(H) × 0.1335mm (V) 0.1529mm(H) × 0.1529mm (V)
Aspect ratio 16:10 16:09
Backlight type W-LED
Power 5V 2A (Per screen)
HDR HDR 10
Mini HDMI 1920×1200@60HZ 1920×1080@60HZ
Type-C 3.1/
Thunderbolt 3/4 1920×1200@60HZ 1920×1080@60HZ
Type-C Only for power 1920×1080@60HZ Only for power
Language English, French, German, Simplified Chinese, Italian, Spanish, Portuguese, Turkish, Polish, Nederlands, Japanese, Korean
Dimension 286×2182×25mm 318×215×25 mm 373×219×25.3 mm 371×231×25.3 mm 395×245×25.3 mm
Tri-screen weight 837 g 1.17 kg 1.39 kg 1.42 kg 1.63 kg