Mitsubishi Electric City Multi PURY-M200YNW-A1 Product guide

PURY-M200-500YNW-A1 (-BS)
PURY-EM200-500YNW-A1 (-BS)
MODEL
AIR CONDITIONING SYSTEMS

MEES18K068
GENERAL LINE-UP GENERAL LINE-UP
I.GENERAL LINE-UP
Heat Recovery R2-Series
Heat Recovery High efficiency R2-Series
PURY-M300YNW-A1(-BS)
PURY-M250YNW-A1(-BS)PURY-M200YNW-A1(-BS)
8, 10, 12HP
PURY-EM300YNW-A1(-BS)
PURY-EM250YNW-A1(-BS)PURY-EM200YNW-A1(-BS)
8, 10, 12HP
20HP
14, 16, 18HP
20HP
PURY-M500YNW-A1(-BS)
PURY-M450YNW-A1(-BS)
PURY-M400YNW-A1(-BS)PURY-M350YNW-A1(-BS)
14, 16, 18HP
PURY-EM500YNW-A1(-BS)
PURY-EM450YNW-A1(-BS)
PURY-EM400YNW-A1(-BS)PURY-EM350YNW-A1(-BS)
body1.fm 1 ページ ２０１８年１１月６日 火曜日 午後１２時３分

PURY-M-YNW-A1, PURY-EM-YNW-A1
MEES18K068 1
CONTENTS R2-Series
I.R2-Series
1. SPECIFICATIONS .................................................................................................................................... 2
2. EXTERNAL DIMENSIONS ....................................................................................................................... 16
3. CENTER OF GRAVITY ............................................................................................................................ 28
4. ELECTRICAL WIRING DIAGRAMS ......................................................................................................... 30
5. SOUND LEVELS ...................................................................................................................................... 33
5-1. Sound levels in cooling mode .......................................................................................................... 33
5-2. Sound levels in heating mode.......................................................................................................... 39
6. VIBRATION LEVEL .................................................................................................................................. 45
7. OPERATION TEMPERATURE RANGE...................................................................................................46
8. CAPACITY TABLES ................................................................................................................................. 47
8-1. Correction by temperature ............................................................................................................... 48
8-2. Correction by total indoor................................................................................................................. 60
8-3. Correction by piping length .............................................................................................................. 64
8-4. Correction at frost and defrost ......................................................................................................... 67
8-5. Correction by antifreeze solution concentration............................................................................... 68
9. ELECTRICAL WORK................................................................................................................................ 69
9-1. Power supply for Outdoor unit ......................................................................................................... 69
9-2. Power cable specifications .............................................................................................................. 70
9-3. Power supply examples................................................................................................................... 71
10.M-NET CONTROL ................................................................................................................................... 72
10-1.Address setting................................................................................................................................ 72
11.PIPING DESIGN ...................................................................................................................................... 73
11-1.R32 Piping material ......................................................................................................................... 73
11-2.Piping Design .................................................................................................................................. 74
11-3.Refrigerant charging calculation ...................................................................................................... 83
11-4.Water piping .................................................................................................................................... 84
0000005068.BOOK 1 ページ ２０１８年１１月２６日 月曜日 午後３時４６分

MEES18K068
PURY-M-YNW-A1, EM-YNW-A1
2
1. SPECIFICATIONS R2-Series
I.R2-Series1. SPECIFICATIONS
Model PURY-M200YNW-A1 (-BS)
Power source 3-phase 4-wire 380-400-415 V 50/60 Hz
Cooling capacity *1 kW 22.4
(Nominal) kcal/h 20,000
BTU/h 76,400
Power input kW 5.53
Current input A 9.3-8.8-8.5
EER kW/kW 4.05
Temp. range of Indoor W.B. 15.0~24.0°C (59~75°F)
cooling *3 Outdoor D.B. -5.0~52.0°C (23~126°F)
Heating capacity *2 kW 25.0
(Nominal) kcal/h 21,500
BTU/h 85,300
Power input kW 6.39
Current input A 10.7-10.2-9.8
COP kW/kW 3.91
Temp. range of Indoor D.B. 15.0~27.0°C (59~81°F)
heating *3 Outdoor W.B. -20.0~15.5°C (-4~60°F)
Indoor unit Total capacity 50~150% of outdoor unit capacity
connectable Model/Quantity WP10~125, W10~125/1~30
Sound pressure level (measured in anechoic room) *4 dB <A> 59.0/59.0
Sound power level (measured in anechoic room) *4 dB <A> 76.0/78.0
Refrigerant High pressure mm (in.) 15.88 (5/8) Brazed
piping diameter Low pressure mm (in.) 19.05 (3/4) Brazed
FAN Type x Quantity Propeller fan x 1
Air flow rate m3/min 170
L/s 2,833
cfm 6,003
Control, Driving mechanism Inverter-control, Direct-driven by motor
Motor output kW 0.92 x 1
*5 External static press. 0 Pa (0 mmH2O)
Compressor Type Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter
Motor output kW 4.6
Case heater kW - (- V)
Lubricant MEL46EH
External finish Pre-coated galvanized steel sheets (+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension H x W x D mm 1,858 (1,798 without legs) x 920 x 740
in. 73-3/16 (70-13/16 without legs) x 36-1/4 x 29-3/16
Protection devices High pressure protection High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Inverter circuit (COMP./FAN) Over-heat protection, Over-current protection
Compressor -
Fan motor -
Refrigerant Type x original charge R32 x 5.2 kg (12 lbs)
Control HBC controller
Net weight kg (lbs) 227 (501)
Heat exchanger Salt-resistant cross fin & copper tube
HIC circuit (HIC: Heat Inter-Changer) -
Defrosting method Auto-defrost mode (Reversed refrigerant cycle, Hot gas)
Drawing External WKL94T598
Wiring WKE94G769
Standard attachment Document Installation Manual
Accessory -
Optional parts
Main HBC controller: CMB-WM108,1016V-AA
Sub HBC controller: CMB-WM108,1016V-AB
Remarks Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be
referred to the Installation Manual.
Due to continuing improvement, above specifications may be subject to change without notice.
Notes: Unit converter
1.Nominal cooling conditions (subject to JIS B8615-2)
Indoor: 27°CD.B./19°CW.B. (81°FD.B./66°FW.B.), Outdoor: 35°CD.B./24°CW.B. (95°FD.B./75°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-2)
Indoor: 20°CD.B. (68°FD.B.), Outdoor: 7°CD.B./6°CW.B. (45°FD.B./43°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.-5°CD.B. (23°FD.B.)/-6°CW.B. (21°FW.B.) to 21°CD.B. (70°FD.B.)/15.5°CW.B. (60°FW.B.)
with cooling/heating mixed operation.
4.Cooling mode/Heating mode
5.External static pressure option is available (30 Pa, 60 Pa, 80 Pa/3.1 mmH2O, 6.1 mmH2O, 8.2 mmH2O).
Consult your dealer about the specification when setting External static pressure option.
6.R32 is flammable, and certain restrictions apply to the installation of units.
When installing new units, moving the existing units, or changing the layout of the room,
ensure that installation restrictions are observed.
For detail, refer to the section in the Databook on installation restrictions.
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg/0.4536
*Above specification data is
subject to rounding variation.
0000005068.BOOK 2 ページ ２０１８年１１月２６日 月曜日 午後３時４６分

MEES18K068
PURY-M-YNW-A1, EM-YNW-A1
3
1. SPECIFICATIONS R2-Series
Model PURY-M250YNW-A1 (-BS)
Power source 3-phase 4-wire 380-400-415 V 50/60 Hz
Cooling capacity *1 kW 28.0
(Nominal) kcal/h 25,000
BTU/h 95,500
Power input kW 8.40
Current input A 14.1-13.4-12.9
EER kW/kW 3.33
Temp. range of Indoor W.B. 15.0~24.0°C (59~75°F)
cooling *3 Outdoor D.B. -5.0~52.0°C (23~126°F)
Heating capacity *2 kW 31.5
(Nominal) kcal/h 27,100
BTU/h 107,500
Power input kW 9.15
Current input A 15.4-14.6-14.1
COP kW/kW 3.44
Temp. range of Indoor D.B. 15.0~27.0°C (59~81°F)
heating *3 Outdoor W.B. -20.0~15.5°C (-4~60°F)
Indoor unit Total capacity 50~150% of outdoor unit capacity
connectable Model/Quantity WP10~125, W10~125/1~37
Sound pressure level (measured in anechoic room) *4 dB <A> 60.5/61.0
Sound power level (measured in anechoic room) *4 dB <A> 78.5/80.0
Refrigerant High pressure mm (in.) 15.88 (5/8) Brazed
piping diameter Low pressure mm (in.) 22.2 (7/8) Brazed
FAN Type x Quantity Propeller fan x 1
Air flow rate m3/min 185
L/s 3,083
cfm 6,532
Control, Driving mechanism Inverter-control, Direct-driven by motor
Motor output kW 0.92 x 1
*5 External static press. 0 Pa (0 mmH2O)
Compressor Type Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter
Motor output kW 7.0
Case heater kW - (- V)
Lubricant MEL46EH
External finish Pre-coated galvanized steel sheets (+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension H x W x D mm 1,858 (1,798 without legs) x 920 x 740
in. 73-3/16 (70-13/16 without legs) x 36-1/4 x 29-3/16
Protection devices High pressure protection High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Inverter circuit (COMP./FAN) Over-heat protection, Over-current protection
Compressor -
Fan motor -
Refrigerant Type x original charge R32 x 5.2 kg (12 lbs)
Control HBC controller
Net weight kg (lbs) 227 (501)
Heat exchanger Salt-resistant cross fin & copper tube
HIC circuit (HIC: Heat Inter-Changer) -
Defrosting method Auto-defrost mode (Reversed refrigerant cycle, Hot gas)
Drawing External WKL94T598
Wiring WKE94G769
Standard attachment Document Installation Manual
Accessory -
Optional parts
Main HBC controller: CMB-WM108,1016V-AA
Sub HBC controller: CMB-WM108,1016V-AB
Remarks Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be
referred to the Installation Manual.
Due to continuing improvement, above specifications may be subject to change without notice.
Notes: Unit converter
1.Nominal cooling conditions (subject to JIS B8615-2)
Indoor: 27°CD.B./19°CW.B. (81°FD.B./66°FW.B.), Outdoor: 35°CD.B./24°CW.B. (95°FD.B./75°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-2)
Indoor: 20°CD.B. (68°FD.B.), Outdoor: 7°CD.B./6°CW.B. (45°FD.B./43°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.-5°CD.B. (23°FD.B.)/-6°CW.B. (21°FW.B.) to 21°CD.B. (70°FD.B.)/15.5°CW.B. (60°FW.B.)
with cooling/heating mixed operation.
4.Cooling mode/Heating mode
5.External static pressure option is available (30 Pa, 60 Pa, 80 Pa/3.1 mmH2O, 6.1 mmH2O, 8.2 mmH2O).
Consult your dealer about the specification when setting External static pressure option.
6.R32 is flammable, and certain restrictions apply to the installation of units.
When installing new units, moving the existing units, or changing the layout of the room,
ensure that installation restrictions are observed.
For detail, refer to the section in the Databook on installation restrictions.
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg/0.4536
*Above specification data is
subject to rounding variation.
0000005068.BOOK 3 ページ ２０１８年１１月２６日 月曜日 午後３時４６分

MEES18K068
PURY-M-YNW-A1, EM-YNW-A1
4
1. SPECIFICATIONS R2-Series
Model PURY-M300YNW-A1 (-BS)
Number of HBC controller Single HBC Double HBC
Power source 3-phase 4-wire 380-400-415 V 50/60 Hz
Cooling capacity *1 kW 33.5
(Nominal) kcal/h 30,000
BTU/h 114,300
Power input kW 11.65 9.88
Current input A 19.6-18.6-18.0 16.6-15.8-15.2
EER kW/kW 2.87 3.39
Temp. range of Indoor W.B. 15.0~24.0°C (59~75°F)
cooling *3 Outdoor D.B. -5.0~52.0°C (23~126°F)
Heating capacity *2 kW 37.5
(Nominal) kcal/h 32,300
BTU/h 128,000
Power input kW 11.00 10.33
Current input A 18.5-17.6-17.0 17.4-16.5-15.9
COP kW/kW 3.40 3.63
Temp. range of Indoor D.B. 15.0~27.0°C (59~81°F)
heating *3 Outdoor W.B. -20.0~15.5°C (-4~60°F)
Indoor unit Total capacity 50~150% of outdoor unit capacity
connectable Model/Quantity WP10~125, W10~125/2~45
Sound pressure level (measured in anechoic room) *4 dB <A> 61.0/67.0
Sound power level (measured in anechoic room) *4 dB <A> 80.0/86.5
Refrigerant High pressure mm (in.) 15.88 (5/8) Brazed
piping diameter Low pressure mm (in.) 22.2 (7/8) Brazed
FAN Type x Quantity Propeller fan x 1
Air flow rate m3/min 240
L/s 4,000
cfm 8,474
Control, Driving mechanism Inverter-control, Direct-driven by motor
Motor output kW 0.92 x 1
*5 External static press. 0 Pa (0 mmH2O)
Compressor Type Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter
Motor output kW 8.0
Case heater kW - (- V)
Lubricant MEL46EH
External finish Pre-coated galvanized steel sheets (+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension H x W x D mm 1,858 (1,798 without legs) x 920 x 740
in. 73-3/16 (70-13/16 without legs) x 36-1/4 x 29-3/16
Protection devices High pressure protection High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Inverter circuit (COMP./FAN) Over-heat protection, Over-current protection
Compressor -
Fan motor -
Refrigerant Type x original charge R32 x 5.2 kg (12 lbs)
Control HBC controller
Net weight kg (lbs) 227 (501)
Heat exchanger Salt-resistant cross fin & copper tube
HIC circuit (HIC: Heat Inter-Changer) -
Defrosting method Auto-defrost mode (Reversed refrigerant cycle, Hot gas)
Drawing External WKL94T598
Wiring WKE94G769
Standard attachment Document Installation Manual
Accessory -
Optional parts Main HBC controller: CMB-WM108,1016V-AA
Sub HBC controller: CMB-WM108,1016V-AB
Remarks Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be
referred to the Installation Manual.
Due to continuing improvement, above specifications may be subject to change without notice.
Notes: Unit converter
1.Nominal cooling conditions (subject to JIS B8615-2)
Indoor: 27°CD.B./19°CW.B. (81°FD.B./66°FW.B.), Outdoor: 35°CD.B./24°CW.B. (95°FD.B./75°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-2)
Indoor: 20°CD.B. (68°FD.B.), Outdoor: 7°CD.B./6°CW.B. (45°FD.B./43°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.-5°CD.B. (23°FD.B.)/-6°CW.B. (21°FW.B.) to 21°CD.B. (70°FD.B.)/15.5°CW.B. (60°FW.B.)
with cooling/heating mixed operation.
4.Cooling mode/Heating mode
5.External static pressure option is available (30 Pa, 60 Pa, 80 Pa/3.1 mmH2O, 6.1 mmH2O, 8.2 mmH2O).
Consult your dealer about the specification when setting External static pressure option.
6.R32 is flammable, and certain restrictions apply to the installation of units.
When installing new units, moving the existing units, or changing the layout of the room,
ensure that installation restrictions are observed.
For detail, refer to the section in the Databook on installation restrictions.
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg/0.4536
*Above specification data is
subject to rounding variation.
0000005068.BOOK 4 ページ ２０１８年１１月２６日 月曜日 午後３時４６分

MEES18K068
PURY-M-YNW-A1, EM-YNW-A1
5
1. SPECIFICATIONS R2-Series
Model PURY-M350YNW-A1 (-BS)
Number of HBC controller Single HBC Double HBC
Power source 3-phase 4-wire 380-400-415 V 50/60 Hz
Cooling capacity *1 kW 40.0
(Nominal) kcal/h 35,000
BTU/h 136,500
Power input kW 14.93 12.15
Current input A 25.2-23.9-23.0 20.5-19.4-18.7
EER kW/kW 2.67 3.29
Temp. range of Indoor W.B. 15.0~24.0°C (59~75°F)
cooling *3 Outdoor D.B. -5.0~52.0°C (23~126°F)
Heating capacity *2 kW 45.0
(Nominal) kcal/h 38,700
BTU/h 153,500
Power input kW 13.14 12.16
Current input A 22.1-21.0-20.3 20.5-19.5-18.7
COP kW/kW 3.42 3.70
Temp. range of Indoor D.B. 15.0~27.0°C (59~81°F)
heating *3 Outdoor W.B. -20.0~15.5°C (-4~60°F)
Indoor unit Total capacity 50~150% of outdoor unit capacity
connectable Model/Quantity WP10~125, W10~125/1~35
Sound pressure level (measured in anechoic room) *4 dB <A> 62.5/64.0
Sound power level (measured in anechoic room) *4 dB <A> 81.0/83.0
Refrigerant High pressure mm (in.) 15.88 (5/8) Brazed
piping diameter Low pressure mm (in.) 28.58 (1-1/8) Brazed
FAN Type x Quantity Propeller fan x 2
Air flow rate m3/min 250
L/s 4,167
cfm 8,828
Control, Driving mechanism Inverter-control, Direct-driven by motor
Motor output kW 0.46 x 2
*5 External static press. 0 Pa (0 mmH2O)
Compressor Type Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter
Motor output kW 9.6
Case heater kW - (- V)
Lubricant MEL46EH
External finish Pre-coated galvanized steel sheets (+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension H x W x D mm 1,858 (1,798 without legs) x 1,240 x 740
in. 73-3/16 (70-13/16 without legs) x 48-7/8 x 29-3/16
Protection devices High pressure protection High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Inverter circuit (COMP./FAN) Over-heat protection, Over-current protection
Compressor -
Fan motor -
Refrigerant Type x original charge R32 x 8.0 kg (18 lbs)
Control HBC controller
Net weight kg (lbs) 270 (596)
Heat exchanger Salt-resistant cross fin & copper tube
HIC circuit (HIC: Heat Inter-Changer) -
Defrosting method Auto-defrost mode (Reversed refrigerant cycle)
Drawing External WKL94T599
Wiring WKE94G770
Standard attachment Document Installation Manual
Accessory -
Optional parts Main HBC controller: CMB-WM108,1016V-AA
Sub HBC controller: CMB-WM108,1016V-AB
Remarks Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be
referred to the Installation Manual.
Due to continuing improvement, above specifications may be subject to change without notice.
Notes: Unit converter
1.Nominal cooling conditions (subject to JIS B8615-2)
Indoor: 27°CD.B./19°CW.B. (81°FD.B./66°FW.B.), Outdoor: 35°CD.B./24°CW.B. (95°FD.B./75°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-2)
Indoor: 20°CD.B. (68°FD.B.), Outdoor: 7°CD.B./6°CW.B. (45°FD.B./43°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.-5°CD.B. (23°FD.B.)/-6°CW.B. (21°FW.B.) to 21°CD.B. (70°FD.B.)/15.5°CW.B. (60°FW.B.)
with cooling/heating mixed operation.
4.Cooling mode/Heating mode
5.External static pressure option is available (30 Pa, 60 Pa, 80 Pa/3.1 mmH2O, 6.1 mmH2O, 8.2 mmH2O).
Consult your dealer about the specification when setting External static pressure option.
6.R32 is flammable, and certain restrictions apply to the installation of units.
When installing new units, moving the existing units, or changing the layout of the room,
ensure that installation restrictions are observed.
For detail, refer to the section in the Databook on installation restrictions.
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg/0.4536
*Above specification data is
subject to rounding variation.
0000005068.BOOK 5 ページ ２０１８年１１月２６日 月曜日 午後３時４６分

MEES18K068
PURY-M-YNW-A1, EM-YNW-A1
6
1. SPECIFICATIONS R2-Series
Model PURY-M400YNW-A1 (-BS)
Power source 3-phase 4-wire 380-400-415 V 50/60 Hz
Cooling capacity *1 kW 45.0
(Nominal) kcal/h 40,000
BTU/h 153,500
Power input kW 15.15
Current input A 25.5-24.2-23.4
EER kW/kW 2.97
Temp. range of Indoor W.B. 15.0~24.0°C (59~75°F)
cooling *3 Outdoor D.B. -5.0~52.0°C (23~126°F)
Heating capacity *2 kW 50.0
(Nominal) kcal/h 45,000
BTU/h 170,600
Power input kW 14.08
Current input A 23.7-22.5-21.7
COP kW/kW 3.55
Temp. range of Indoor D.B. 15.0~27.0°C (59~81°F)
heating *3 Outdoor W.B. -20.0~15.5°C (-4~60°F)
Indoor unit Total capacity 50~150% of outdoor unit capacity
connectable Model/Quantity WP10~125, W10~125/1~40
Sound pressure level (measured in anechoic room) *4 dB <A> 65.0/69.0
Sound power level (measured in anechoic room) *4 dB <A> 83.0/88.0
Refrigerant High pressure mm (in.) 19.05 (3/4) Brazed
piping diameter Low pressure mm (in.) 28.58 (1-1/8) Brazed
FAN Type x Quantity Propeller fan x 2
Air flow rate m3/min 315
L/s 5,250
cfm 11,123
Control, Driving mechanism Inverter-control, Direct-driven by motor
Motor output kW 0.46 x 2
*5 External static press. 0 Pa (0 mmH2O)
Compressor Type Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter
Motor output kW 12.2
Case heater kW - (- V)
Lubricant MEL46EH
External finish Pre-coated galvanized steel sheets (+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension H x W x D mm 1,858 (1,798 without legs) x 1,240 x 740
in. 73-3/16 (70-13/16 without legs) x 48-7/8 x 29-3/16
Protection devices High pressure protection High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Inverter circuit (COMP./FAN) Over-heat protection, Over-current protection
Compressor -
Fan motor -
Refrigerant Type x original charge R32 x 8.0 kg (18 lbs)
Control HBC controller
Net weight kg (lbs) 273 (602)
Heat exchanger Salt-resistant cross fin & copper tube
HIC circuit (HIC: Heat Inter-Changer) -
Defrosting method Auto-defrost mode (Reversed refrigerant cycle)
Drawing External WKL94T599
Wiring WKE94G770
Standard attachment Document Installation Manual
Accessory -
Optional parts
Main HBC controller: CMB-WM108,1016V-AA
Sub HBC controller: CMB-WM108,1016V-AB
Remarks Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be
referred to the Installation Manual.
Due to continuing improvement, above specifications may be subject to change without notice.
Notes: Unit converter
1.Nominal cooling conditions (subject to JIS B8615-2)
Indoor: 27°CD.B./19°CW.B. (81°FD.B./66°FW.B.), Outdoor: 35°CD.B./24°CW.B. (95°FD.B./75°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-2)
Indoor: 20°CD.B. (68°FD.B.), Outdoor: 7°CD.B./6°CW.B. (45°FD.B./43°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.-5°CD.B. (23°FD.B.)/-6°CW.B. (21°FW.B.) to 21°CD.B. (70°FD.B.)/15.5°CW.B. (60°FW.B.)
with cooling/heating mixed operation.
4.Cooling mode/Heating mode
5.External static pressure option is available (30 Pa, 60 Pa, 80 Pa/3.1 mmH2O, 6.1 mmH2O, 8.2 mmH2O).
Consult your dealer about the specification when setting External static pressure option.
6.R32 is flammable, and certain restrictions apply to the installation of units.
When installing new units, moving the existing units, or changing the layout of the room,
ensure that installation restrictions are observed.
For detail, refer to the section in the Databook on installation restrictions.
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg/0.4536
*Above specification data is
subject to rounding variation.
0000005068.BOOK 6 ページ ２０１８年１１月２６日 月曜日 午後３時４６分

MEES18K068
PURY-M-YNW-A1, EM-YNW-A1
7
1. SPECIFICATIONS R2-Series
Model PURY-M450YNW-A1 (-BS)
Power source 3-phase 4-wire 380-400-415 V 50/60 Hz
Cooling capacity *1 kW 50.0
(Nominal) kcal/h 45,000
BTU/h 170,600
Power input kW 15.47
Current input A 26.1-24.8-23.9
EER kW/kW 3.23
Temp. range of Indoor W.B. 15.0~24.0°C (59~75°F)
cooling *3 Outdoor D.B. -5.0~52.0°C (23~126°F)
Heating capacity *2 kW 56.0
(Nominal) kcal/h 50,000
BTU/h 191,100
Power input kW 16.18
Current input A 27.3-25.9-25.0
COP kW/kW 3.46
Temp. range of Indoor D.B. 15.0~27.0°C (59~81°F)
heating *3 Outdoor W.B. -20.0~15.5°C (-4~60°F)
Indoor unit Total capacity 50~150% of outdoor unit capacity
connectable Model/Quantity WP10~125, W10~125/1~45
Sound pressure level (measured in anechoic room) *4 dB <A> 65.5/70.0
Sound power level (measured in anechoic room) *4 dB <A> 83.0/89.0
Refrigerant High pressure mm (in.) 19.05 (3/4) Brazed
piping diameter Low pressure mm (in.) 28.58 (1-1/8) Brazed
FAN Type x Quantity Propeller fan x 2
Air flow rate m3/min 317
L/s 5,283
cfm 11,193
Control, Driving mechanism Inverter-control, Direct-driven by motor
Motor output kW 0.46 x 2
*5 External static press. 0 Pa (0 mmH2O)
Compressor Type Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter
Motor output kW 13.1
Case heater kW - (- V)
Lubricant MEL46EH
External finish Pre-coated galvanized steel sheets (+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension H x W x D mm 1,858 (1,798 without legs) x 1,240 x 740
in. 73-3/16 (70-13/16 without legs) x 48-7/8 x 29-3/16
Protection devices High pressure protection High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Inverter circuit (COMP./FAN) Over-heat protection, Over-current protection
Compressor -
Fan motor -
Refrigerant Type x original charge R32 x 10.8 kg (24 lbs)
Control HBC controller
Net weight kg (lbs) 293 (646)
Heat exchanger Salt-resistant cross fin & copper tube
HIC circuit (HIC: Heat Inter-Changer) -
Defrosting method Auto-defrost mode (Reversed refrigerant cycle)
Drawing External WKL94T599
Wiring WKE94G770
Standard attachment Document Installation Manual
Accessory -
Optional parts
Main HBC controller: CMB-WM108,1016V-AA
Sub HBC controller: CMB-WM108,1016V-AB
Remarks Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be
referred to the Installation Manual.
Due to continuing improvement, above specifications may be subject to change without notice.
Notes: Unit converter
1.Nominal cooling conditions (subject to JIS B8615-2)
Indoor: 27°CD.B./19°CW.B. (81°FD.B./66°FW.B.), Outdoor: 35°CD.B./24°CW.B. (95°FD.B./75°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-2)
Indoor: 20°CD.B. (68°FD.B.), Outdoor: 7°CD.B./6°CW.B. (45°FD.B./43°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.-5°CD.B. (23°FD.B.)/-6°CW.B. (21°FW.B.) to 21°CD.B. (70°FD.B.)/15.5°CW.B. (60°FW.B.)
with cooling/heating mixed operation.
4.Cooling mode/Heating mode
5.External static pressure option is available (30 Pa, 60 Pa, 80 Pa/3.1 mmH2O, 6.1 mmH2O, 8.2 mmH2O).
Consult your dealer about the specification when setting External static pressure option.
6.R32 is flammable, and certain restrictions apply to the installation of units.
When installing new units, moving the existing units, or changing the layout of the room,
ensure that installation restrictions are observed.
For detail, refer to the section in the Databook on installation restrictions.
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg/0.4536
*Above specification data is
subject to rounding variation.
0000005068.BOOK 7 ページ ２０１８年１１月２６日 月曜日 午後３時４６分

MEES18K068
PURY-M-YNW-A1, EM-YNW-A1
8
1. SPECIFICATIONS R2-Series
Model PURY-M500YNW-A1 (-BS)
Power source 3-phase 4-wire 380-400-415 V 50/60 Hz
Cooling capacity *1 kW 56.0
(Nominal) kcal/h 50,000
BTU/h 191,100
Power input kW 22.25
Current input A 37.5-35.6-34.3
EER kW/kW 2.51
Temp. range of Indoor W.B. 15.0~24.0°C (59~75°F)
cooling *3 Outdoor D.B. -5.0~52.0°C (23~126°F)
Heating capacity *2 kW 63.0
(Nominal) kcal/h 54,200
BTU/h 215,000
Power input kW 18.26
Current input A 30.8-29.2-28.2
COP kW/kW 3.45
Temp. range of Indoor D.B. 15.0~27.0°C (59~81°F)
heating *3 Outdoor W.B. -20.0~15.5°C (-4~60°F)
Indoor unit Total capacity 50~150% of outdoor unit capacity
connectable Model/Quantity WP10~125, W10~125/1~50
Sound pressure level (measured in anechoic room) *4 dB <A> 63.5/64.5
Sound power level (measured in anechoic room) *4 dB <A> 82.0/84.0
Refrigerant High pressure mm (in.) 19.05 (3/4) Brazed
piping diameter Low pressure mm (in.) 28.58 (1-1/8) Brazed
FAN Type x Quantity Propeller fan x 2
Air flow rate m3/min 295
L/s 4,917
cfm 10,416
Control, Driving mechanism Inverter-control, Direct-driven by motor
Motor output kW 0.92 x 2
*5 External static press. 0 Pa (0 mmH2O)
Compressor Type Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter
Motor output kW 17.4
Case heater kW - (- V)
Lubricant MEL46EH
External finish Pre-coated galvanized steel sheets (+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension H x W x D mm 1,858 (1,798 without legs) x 1,750 x 740
in. 73-3/16 (70-13/16 without legs) x 68-15/16 x 29-3/16
Protection devices High pressure protection High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Inverter circuit (COMP./FAN) Over-heat protection, Over-current protection
Compressor -
Fan motor -
Refrigerant Type x original charge R32 x 10.8 kg (24 lbs)
Control HBC controller
Net weight kg (lbs) 337 (743)
Heat exchanger Salt-resistant cross fin & copper tube
HIC circuit (HIC: Heat Inter-Changer) -
Defrosting method Auto-defrost mode (Reversed refrigerant cycle)
Drawing External WKL94T600
Wiring WKE94G771
Standard attachment Document Installation Manual
Accessory -
Optional parts
Main HBC controller: CMB-WM108,1016V-AA
Sub HBC controller: CMB-WM108,1016V-AB
Remarks Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be
referred to the Installation Manual.
Due to continuing improvement, above specifications may be subject to change without notice.
Notes: Unit converter
1.Nominal cooling conditions (subject to JIS B8615-2)
Indoor: 27°CD.B./19°CW.B. (81°FD.B./66°FW.B.), Outdoor: 35°CD.B./24°CW.B. (95°FD.B./75°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-2)
Indoor: 20°CD.B. (68°FD.B.), Outdoor: 7°CD.B./6°CW.B. (45°FD.B./43°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.-5°CD.B. (23°FD.B.)/-6°CW.B. (21°FW.B.) to 21°CD.B. (70°FD.B.)/15.5°CW.B. (60°FW.B.)
with cooling/heating mixed operation.
4.Cooling mode/Heating mode
5.External static pressure option is available (30 Pa, 60 Pa, 80 Pa/3.1 mmH2O, 6.1 mmH2O, 8.2 mmH2O).
Consult your dealer about the specification when setting External static pressure option.
6.R32 is flammable, and certain restrictions apply to the installation of units.
When installing new units, moving the existing units, or changing the layout of the room,
ensure that installation restrictions are observed.
For detail, refer to the section in the Databook on installation restrictions.
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg/0.4536
*Above specification data is
subject to rounding variation.
0000005068.BOOK 8 ページ ２０１８年１１月２６日 月曜日 午後３時４６分

MEES18K068
PURY-M-YNW-A1, EM-YNW-A1
9
1. SPECIFICATIONS R2-Series
Model PURY-EM200YNW-A1 (-BS)
Power source 3-phase 4-wire 380-400-415 V 50/60 Hz
Cooling capacity *1 kW 22.4
(Nominal) kcal/h 20,000
BTU/h 76,400
Power input kW 5.13
Current input A 8.6-8.2-7.9
EER kW/kW 4.36
Temp. range of Indoor W.B. 15.0~24.0°C (59~75°F)
cooling *3 Outdoor D.B. -5.0~52.0°C (23~126°F)
Heating capacity *2 kW 25.0
(Nominal) kcal/h 21,500
BTU/h 85,300
Power input kW 6.23
Current input A 10.5-9.9-9.6
COP kW/kW 4.01
Temp. range of Indoor D.B. 15.0~27.0°C (59~81°F)
heating *3 Outdoor W.B. -20.0~15.5°C (-4~60°F)
Indoor unit Total capacity 50~150% of outdoor unit capacity
connectable Model/Quantity WP10~125, W10~125/1~30
Sound pressure level (measured in anechoic room) *4 dB <A> 59.0/59.0
Sound power level (measured in anechoic room) *4 dB <A> 76.0/78.0
Refrigerant High pressure mm (in.) 15.88 (5/8) Brazed
piping diameter Low pressure mm (in.) 19.05 (3/4) Brazed
FAN Type x Quantity Propeller fan x 1
Air flow rate m3/min 170
L/s 2,833
cfm 6,003
Control, Driving mechanism Inverter-control, Direct-driven by motor
Motor output kW 0.92 x 1
*5 External static press. 0 Pa (0 mmH2O)
Compressor Type Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter
Motor output kW 4.5
Case heater kW - (- V)
Lubricant MEL46EH
External finish Pre-coated galvanized steel sheets (+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension H x W x D mm 1,858 (1,798 without legs) x 920 x 740
in. 73-3/16 (70-13/16 without legs) x 36-1/4 x 29-3/16
Protection devices High pressure protection High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Inverter circuit (COMP./FAN) Over-heat protection, Over-current protection
Compressor -
Fan motor -
Refrigerant Type x original charge R32 x 5.2 kg (12 lbs)
Control HBC controller
Net weight kg (lbs) 231 (510)
Heat exchanger Salt-resistant cross fin & aluminium tube
HIC circuit (HIC: Heat Inter-Changer) -
Defrosting method Auto-defrost mode (Reversed refrigerant cycle, Hot gas)
Drawing External WKL94T601
Wiring WKE94G769
Standard attachment Document Installation Manual
Accessory -
Optional parts
Main HBC controller: CMB-WM108,1016V-AA
Sub HBC controller: CMB-WM108,1016V-AB
Remarks Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be
referred to the Installation Manual.
Due to continuing improvement, above specifications may be subject to change without notice.
Notes: Unit converter
1.Nominal cooling conditions (subject to JIS B8615-2)
Indoor: 27°CD.B./19°CW.B. (81°FD.B./66°FW.B.), Outdoor: 35°CD.B./24°CW.B. (95°FD.B./75°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-2)
Indoor: 20°CD.B. (68°FD.B.), Outdoor: 7°CD.B./6°CW.B. (45°FD.B./43°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.-5°CD.B. (23°FD.B.)/-6°CW.B. (21°FW.B.) to 21°CD.B. (70°FD.B.)/15.5°CW.B. (60°FW.B.)
with cooling/heating mixed operation.
4.Cooling mode/Heating mode
5.External static pressure option is available (30 Pa, 60 Pa, 80 Pa/3.1 mmH2O, 6.1 mmH2O, 8.2 mmH2O).
Consult your dealer about the specification when setting External static pressure option.
6.R32 is flammable, and certain restrictions apply to the installation of units.
When installing new units, moving the existing units, or changing the layout of the room,
ensure that installation restrictions are observed.
For detail, refer to the section in the Databook on installation restrictions.
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg/0.4536
*Above specification data is
subject to rounding variation.
0000005068.BOOK 9 ページ ２０１８年１１月２６日 月曜日 午後３時４６分

MEES18K068
PURY-M-YNW-A1, EM-YNW-A1
10
1. SPECIFICATIONS R2-Series
Model PURY-EM250YNW-A1 (-BS)
Power source 3-phase 4-wire 380-400-415 V 50/60 Hz
Cooling capacity *1 kW 28.0
(Nominal) kcal/h 25,000
BTU/h 95,500
Power input kW 7.69
Current input A 12.9-12.3-11.8
EER kW/kW 3.64
Temp. range of Indoor W.B. 15.0~24.0°C (59~75°F)
cooling *3 Outdoor D.B. -5.0~52.0°C (23~126°F)
Heating capacity *2 kW 31.5
(Nominal) kcal/h 27,100
BTU/h 107,500
Power input kW 8.84
Current input A 14.9-14.1-13.6
COP kW/kW 3.56
Temp. range of Indoor D.B. 15.0~27.0°C (59~81°F)
heating *3 Outdoor W.B. -20.0~15.5°C (-4~60°F)
Indoor unit Total capacity 50~150% of outdoor unit capacity
connectable Model/Quantity WP10~125, W10~125/1~37
Sound pressure level (measured in anechoic room) *4 dB <A> 60.5/61.0
Sound power level (measured in anechoic room) *4 dB <A> 78.5/80.0
Refrigerant High pressure mm (in.) 15.88 (5/8) Brazed
piping diameter Low pressure mm (in.) 22.2 (7/8) Brazed
FAN Type x Quantity Propeller fan x 1
Air flow rate m3/min 185
L/s 3,083
cfm 6,532
Control, Driving mechanism Inverter-control, Direct-driven by motor
Motor output kW 0.92 x 1
*5 External static press. 0 Pa (0 mmH2O)
Compressor Type Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter
Motor output kW 6.7
Case heater kW - (- V)
Lubricant MEL46EH
External finish Pre-coated galvanized steel sheets (+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension H x W x D mm 1,858 (1,798 without legs) x 920 x 740
in. 73-3/16 (70-13/16 without legs) x 36-1/4 x 29-3/16
Protection devices High pressure protection High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Inverter circuit (COMP./FAN) Over-heat protection, Over-current protection
Compressor -
Fan motor -
Refrigerant Type x original charge R32 x 5.2 kg (12 lbs)
Control HBC controller
Net weight kg (lbs) 231 (510)
Heat exchanger Salt-resistant cross fin & aluminium tube
HIC circuit (HIC: Heat Inter-Changer) -
Defrosting method Auto-defrost mode (Reversed refrigerant cycle, Hot gas)
Drawing External WKL94T601
Wiring WKE94G769
Standard attachment Document Installation Manual
Accessory -
Optional parts
Main HBC controller: CMB-WM108,1016V-AA
Sub HBC controller: CMB-WM108,1016V-AB
Remarks Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be
referred to the Installation Manual.
Due to continuing improvement, above specifications may be subject to change without notice.
Notes: Unit converter
1.Nominal cooling conditions (subject to JIS B8615-2)
Indoor: 27°CD.B./19°CW.B. (81°FD.B./66°FW.B.), Outdoor: 35°CD.B./24°CW.B. (95°FD.B./75°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-2)
Indoor: 20°CD.B. (68°FD.B.), Outdoor: 7°CD.B./6°CW.B. (45°FD.B./43°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.-5°CD.B. (23°FD.B.)/-6°CW.B. (21°FW.B.) to 21°CD.B. (70°FD.B.)/15.5°CW.B. (60°FW.B.)
with cooling/heating mixed operation.
4.Cooling mode/Heating mode
5.External static pressure option is available (30 Pa, 60 Pa, 80 Pa/3.1 mmH2O, 6.1 mmH2O, 8.2 mmH2O).
Consult your dealer about the specification when setting External static pressure option.
6.R32 is flammable, and certain restrictions apply to the installation of units.
When installing new units, moving the existing units, or changing the layout of the room,
ensure that installation restrictions are observed.
For detail, refer to the section in the Databook on installation restrictions.
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg/0.4536
*Above specification data is
subject to rounding variation.
0000005068.BOOK 10 ページ ２０１８年１１月２６日 月曜日 午後３時４６分

MEES18K068
PURY-M-YNW-A1, EM-YNW-A1
11
1. SPECIFICATIONS R2-Series
Model PURY-EM300YNW-A1 (-BS)
Number of HBC controller Single HBC Double HBC
Power source 3-phase 4-wire 380-400-415 V 50/60 Hz
Cooling capacity *1 kW 33.5
(Nominal) kcal/h 30,000
BTU/h 114,300
Power input kW 10.03 8.52
Current input A 16.9-16.0-15.5 14.3-13.6-13.1
EER kW/kW 3.33 3.93
Temp. range of Indoor W.B. 15.0~24.0°C (59~75°F)
cooling *3 Outdoor D.B. -5.0~52.0°C (23~126°F)
Heating capacity *2 kW 37.5
(Nominal) kcal/h 32,300
BTU/h 128,000
Power input kW 10.46 9.93
Current input A 17.6-16.7-16.1 16.7-15.9-15.3
COP kW/kW 3.58 3.77
Temp. range of Indoor D.B. 15.0~27.0°C (59~81°F)
heating *3 Outdoor W.B. -20.0~15.5°C (-4~60°F)
Indoor unit Total capacity 50~150% of outdoor unit capacity
connectable Model/Quantity WP10~125, W10~125/2~45
Sound pressure level (measured in anechoic room) *4 dB <A> 61.0/67.0
Sound power level (measured in anechoic room) *4 dB <A> 80.0/86.5
Refrigerant High pressure mm (in.) 15.88 (5/8) Brazed
piping diameter Low pressure mm (in.) 22.2 (7/8) Brazed
FAN Type x Quantity Propeller fan x 1
Air flow rate m3/min 240
L/s 4,000
cfm 8,474
Control, Driving mechanism Inverter-control, Direct-driven by motor
Motor output kW 0.92 x 1
*5 External static press. 0 Pa (0 mmH2O)
Compressor Type Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter
Motor output kW 7.7
Case heater kW - (- V)
Lubricant MEL46EH
External finish Pre-coated galvanized steel sheets (+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension H x W x D mm 1,858 (1,798 without legs) x 920 x 740
in. 73-3/16 (70-13/16 without legs) x 36-1/4 x 29-3/16
Protection devices High pressure protection High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Inverter circuit (COMP./FAN) Over-heat protection, Over-current protection
Compressor -
Fan motor -
Refrigerant Type x original charge R32 x 5.2 kg (12 lbs)
Control HBC controller
Net weight kg (lbs) 231 (510)
Heat exchanger Salt-resistant cross fin & aluminium tube
HIC circuit (HIC: Heat Inter-Changer) -
Defrosting method Auto-defrost mode (Reversed refrigerant cycle, Hot gas)
Drawing External WKL94T601
Wiring WKE94G769
Standard attachment Document Installation Manual
Accessory -
Optional parts Main HBC controller: CMB-WM108,1016V-AA
Sub HBC controller: CMB-WM108,1016V-AB
Remarks Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be
referred to the Installation Manual.
Due to continuing improvement, above specifications may be subject to change without notice.
Notes: Unit converter
1.Nominal cooling conditions (subject to JIS B8615-2)
Indoor: 27°CD.B./19°CW.B. (81°FD.B./66°FW.B.), Outdoor: 35°CD.B./24°CW.B. (95°FD.B./75°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-2)
Indoor: 20°CD.B. (68°FD.B.), Outdoor: 7°CD.B./6°CW.B. (45°FD.B./43°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.-5°CD.B. (23°FD.B.)/-6°CW.B. (21°FW.B.) to 21°CD.B. (70°FD.B.)/15.5°CW.B. (60°FW.B.)
with cooling/heating mixed operation.
4.Cooling mode/Heating mode
5.External static pressure option is available (30 Pa, 60 Pa, 80 Pa/3.1 mmH2O, 6.1 mmH2O, 8.2 mmH2O).
Consult your dealer about the specification when setting External static pressure option.
6.R32 is flammable, and certain restrictions apply to the installation of units.
When installing new units, moving the existing units, or changing the layout of the room,
ensure that installation restrictions are observed.
For detail, refer to the section in the Databook on installation restrictions.
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg/0.4536
*Above specification data is
subject to rounding variation.
0000005068.BOOK 11 ページ ２０１８年１１月２６日 月曜日 午後３時４６分

MEES18K068
PURY-M-YNW-A1, EM-YNW-A1
12
1. SPECIFICATIONS R2-Series
Model PURY-EM350YNW-A1 (-BS)
Number of HBC controller Single HBC Double HBC
Power source 3-phase 4-wire 380-400-415 V 50/60 Hz
Cooling capacity *1 kW 40.0
(Nominal) kcal/h 35,000
BTU/h 136,500
Power input kW 13.91 11.33
Current input A 23.4-22.3-21.5 19.1-18.1-17.5
EER kW/kW 2.87 3.53
Temp. range of Indoor W.B. 15.0~24.0°C (59~75°F)
cooling *3 Outdoor D.B. -5.0~52.0°C (23~126°F)
Heating capacity *2 kW 45.0
(Nominal) kcal/h 38,700
BTU/h 153,500
Power input kW 13.10 12.16
Current input A 22.1-21.0-20.2 20.5-19.5-18.7
COP kW/kW 3.43 3.70
Temp. range of Indoor D.B. 15.0~27.0°C (59~81°F)
heating *3 Outdoor W.B. -20.0~15.5°C (-4~60°F)
Indoor unit Total capacity 50~150% of outdoor unit capacity
connectable Model/Quantity WP10~125, W10~125/1~35
Sound pressure level (measured in anechoic room) *4 dB <A> 62.5/64.0
Sound power level (measured in anechoic room) *4 dB <A> 81.0/83.0
Refrigerant High pressure mm (in.) 15.88 (5/8) Brazed
piping diameter Low pressure mm (in.) 28.58 (1-1/8) Brazed
FAN Type x Quantity Propeller fan x 2
Air flow rate m3/min 250
L/s 4,167
cfm 8,828
Control, Driving mechanism Inverter-control, Direct-driven by motor
Motor output kW 0.46 x 2
*5 External static press. 0 Pa (0 mmH2O)
Compressor Type Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter
Motor output kW 9.6
Case heater kW - (- V)
Lubricant MEL46EH
External finish Pre-coated galvanized steel sheets (+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension H x W x D mm 1,858 (1,798 without legs) x 1,240 x 740
in. 73-3/16 (70-13/16 without legs) x 48-7/8 x 29-3/16
Protection devices High pressure protection High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Inverter circuit (COMP./FAN) Over-heat protection, Over-current protection
Compressor -
Fan motor -
Refrigerant Type x original charge R32 x 8.0 kg (18 lbs)
Control HBC controller
Net weight kg (lbs) 276 (609)
Heat exchanger Salt-resistant cross fin & aluminium tube
HIC circuit (HIC: Heat Inter-Changer) -
Defrosting method Auto-defrost mode (Reversed refrigerant cycle, Hot gas)
Drawing External WKL94T602
Wiring WKE94G770
Standard attachment Document Installation Manual
Accessory -
Optional parts Main HBC controller: CMB-WM108,1016V-AA
Sub HBC controller: CMB-WM108,1016V-AB
Remarks Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be
referred to the Installation Manual.
Due to continuing improvement, above specifications may be subject to change without notice.
Notes: Unit converter
1.Nominal cooling conditions (subject to JIS B8615-2)
Indoor: 27°CD.B./19°CW.B. (81°FD.B./66°FW.B.), Outdoor: 35°CD.B./24°CW.B. (95°FD.B./75°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-2)
Indoor: 20°CD.B. (68°FD.B.), Outdoor: 7°CD.B./6°CW.B. (45°FD.B./43°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.-5°CD.B. (23°FD.B.)/-6°CW.B. (21°FW.B.) to 21°CD.B. (70°FD.B.)/15.5°CW.B. (60°FW.B.)
with cooling/heating mixed operation.
4.Cooling mode/Heating mode
5.External static pressure option is available (30 Pa, 60 Pa, 80 Pa/3.1 mmH2O, 6.1 mmH2O, 8.2 mmH2O).
Consult your dealer about the specification when setting External static pressure option.
6.R32 is flammable, and certain restrictions apply to the installation of units.
When installing new units, moving the existing units, or changing the layout of the room,
ensure that installation restrictions are observed.
For detail, refer to the section in the Databook on installation restrictions.
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg/0.4536
*Above specification data is
subject to rounding variation.
0000005068.BOOK 12 ページ ２０１８年１１月２６日 月曜日 午後３時４６分

MEES18K068
PURY-M-YNW-A1, EM-YNW-A1
13
1. SPECIFICATIONS R2-Series
Model PURY-EM400YNW-A1 (-BS)
Power source 3-phase 4-wire 380-400-415 V 50/60 Hz
Cooling capacity *1 kW 45.0
(Nominal) kcal/h 40,000
BTU/h 153,500
Power input kW 13.84
Current input A 23.3-22.1-21.3
EER kW/kW 3.25
Temp. range of Indoor W.B. 15.0~24.0°C (59~75°F)
cooling *3 Outdoor D.B. -5.0~52.0°C (23~126°F)
Heating capacity *2 kW 50.0
(Nominal) kcal/h 45,000
BTU/h 170,600
Power input kW 13.88
Current input A 23.4-22.2-21.4
COP kW/kW 3.60
Temp. range of Indoor D.B. 15.0~27.0°C (59~81°F)
heating *3 Outdoor W.B. -20.0~15.5°C (-4~60°F)
Indoor unit Total capacity 50~150% of outdoor unit capacity
connectable Model/Quantity WP10~125, W10~125/1~40
Sound pressure level (measured in anechoic room) *4 dB <A> 65.0/69.0
Sound power level (measured in anechoic room) *4 dB <A> 83.0/88.0
Refrigerant High pressure mm (in.) 19.05 (3/4) Brazed
piping diameter Low pressure mm (in.) 28.58 (1-1/8) Brazed
FAN Type x Quantity Propeller fan x 2
Air flow rate m3/min 315
L/s 5,250
cfm 11,123
Control, Driving mechanism Inverter-control, Direct-driven by motor
Motor output kW 0.46 x 2
*5 External static press. 0 Pa (0 mmH2O)
Compressor Type Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter
Motor output kW 11.1
Case heater kW - (- V)
Lubricant MEL46EH
External finish Pre-coated galvanized steel sheets (+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension H x W x D mm 1,858 (1,798 without legs) x 1,240 x 740
in. 73-3/16 (70-13/16 without legs) x 48-7/8 x 29-3/16
Protection devices High pressure protection High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Inverter circuit (COMP./FAN) Over-heat protection, Over-current protection
Compressor -
Fan motor -
Refrigerant Type x original charge R32 x 8.0 kg (18 lbs)
Control HBC controller
Net weight kg (lbs) 280 (618)
Heat exchanger Salt-resistant cross fin & aluminium tube
HIC circuit (HIC: Heat Inter-Changer) -
Defrosting method Auto-defrost mode (Reversed refrigerant cycle)
Drawing External WKL94T602
Wiring WKE94G770
Standard attachment Document Installation Manual
Accessory -
Optional parts
Main HBC controller: CMB-WM108,1016V-AA
Sub HBC controller: CMB-WM108,1016V-AB
Remarks Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be
referred to the Installation Manual.
Due to continuing improvement, above specifications may be subject to change without notice.
Notes: Unit converter
1.Nominal cooling conditions (subject to JIS B8615-2)
Indoor: 27°CD.B./19°CW.B. (81°FD.B./66°FW.B.), Outdoor: 35°CD.B./24°CW.B. (95°FD.B./75°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-2)
Indoor: 20°CD.B. (68°FD.B.), Outdoor: 7°CD.B./6°CW.B. (45°FD.B./43°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.-5°CD.B. (23°FD.B.)/-6°CW.B. (21°FW.B.) to 21°CD.B. (70°FD.B.)/15.5°CW.B. (60°FW.B.)
with cooling/heating mixed operation.
4.Cooling mode/Heating mode
5.External static pressure option is available (30 Pa, 60 Pa, 80 Pa/3.1 mmH2O, 6.1 mmH2O, 8.2 mmH2O).
Consult your dealer about the specification when setting External static pressure option.
6.R32 is flammable, and certain restrictions apply to the installation of units.
When installing new units, moving the existing units, or changing the layout of the room,
ensure that installation restrictions are observed.
For detail, refer to the section in the Databook on installation restrictions.
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg/0.4536
*Above specification data is
subject to rounding variation.
0000005068.BOOK 13 ページ ２０１８年１１月２６日 月曜日 午後３時４６分

MEES18K068
PURY-M-YNW-A1, EM-YNW-A1
14
1. SPECIFICATIONS R2-Series
Model PURY-EM450YNW-A1 (-BS)
Power source 3-phase 4-wire 380-400-415 V 50/60 Hz
Cooling capacity *1 kW 50.0
(Nominal) kcal/h 45,000
BTU/h 170,600
Power input kW 15.24
Current input A 25.7-24.4-23.5
EER kW/kW 3.28
Temp. range of Indoor W.B. 15.0~24.0°C (59~75°F)
cooling *3 Outdoor D.B. -5.0~52.0°C (23~126°F)
Heating capacity *2 kW 56.0
(Nominal) kcal/h 50,000
BTU/h 191,100
Power input kW 15.77
Current input A 26.6-25.2-24.3
COP kW/kW 3.55
Temp. range of Indoor D.B. 15.0~27.0°C (59~81°F)
heating *3 Outdoor W.B. -20.0~15.5°C (-4~60°F)
Indoor unit Total capacity 50~150% of outdoor unit capacity
connectable Model/Quantity WP10~125, W10~125/1~45
Sound pressure level (measured in anechoic room) *4 dB <A> 65.5/70.0
Sound power level (measured in anechoic room) *4 dB <A> 83.0/89.0
Refrigerant High pressure mm (in.) 19.05 (3/4) Brazed
piping diameter Low pressure mm (in.) 28.58 (1-1/8) Brazed
FAN Type x Quantity Propeller fan x 2
Air flow rate m3/min 315
L/s 5,250
cfm 11,123
Control, Driving mechanism Inverter-control, Direct-driven by motor
Motor output kW 0.46 x 2
*5 External static press. 0 Pa (0 mmH2O)
Compressor Type Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter
Motor output kW 12.7
Case heater kW - (- V)
Lubricant MEL46EH
External finish Pre-coated galvanized steel sheets (+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension H x W x D mm 1,858 (1,798 without legs) x 1,240 x 740
in. 73-3/16 (70-13/16 without legs) x 48-7/8 x 29-3/16
Protection devices High pressure protection High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Inverter circuit (COMP./FAN) Over-heat protection, Over-current protection
Compressor -
Fan motor -
Refrigerant Type x original charge R32 x 10.8 kg (24 lbs)
Control HBC controller
Net weight kg (lbs) 305 (673)
Heat exchanger Salt-resistant cross fin & aluminium tube
HIC circuit (HIC: Heat Inter-Changer) -
Defrosting method Auto-defrost mode (Reversed refrigerant cycle)
Drawing External WKL94T602
Wiring WKE94G770
Standard attachment Document Installation Manual
Accessory -
Optional parts
Main HBC controller: CMB-WM108,1016V-AA
Sub HBC controller: CMB-WM108,1016V-AB
Remarks Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be
referred to the Installation Manual.
Due to continuing improvement, above specifications may be subject to change without notice.
Notes: Unit converter
1.Nominal cooling conditions (subject to JIS B8615-2)
Indoor: 27°CD.B./19°CW.B. (81°FD.B./66°FW.B.), Outdoor: 35°CD.B./24°CW.B. (95°FD.B./75°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-2)
Indoor: 20°CD.B. (68°FD.B.), Outdoor: 7°CD.B./6°CW.B. (45°FD.B./43°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.-5°CD.B. (23°FD.B.)/-6°CW.B. (21°FW.B.) to 21°CD.B. (70°FD.B.)/15.5°CW.B. (60°FW.B.)
with cooling/heating mixed operation.
4.Cooling mode/Heating mode
5.External static pressure option is available (30 Pa, 60 Pa, 80 Pa/3.1 mmH2O, 6.1 mmH2O, 8.2 mmH2O).
Consult your dealer about the specification when setting External static pressure option.
6.R32 is flammable, and certain restrictions apply to the installation of units.
When installing new units, moving the existing units, or changing the layout of the room,
ensure that installation restrictions are observed.
For detail, refer to the section in the Databook on installation restrictions.
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg/0.4536
*Above specification data is
subject to rounding variation.
0000005068.BOOK 14 ページ ２０１８年１１月２６日 月曜日 午後３時４６分

MEES18K068
PURY-M-YNW-A1, EM-YNW-A1
15
1. SPECIFICATIONS R2-Series
Model PURY-EM500YNW-A1 (-BS)
Power source 3-phase 4-wire 380-400-415 V 50/60 Hz
Cooling capacity *1 kW 56.0
(Nominal) kcal/h 50,000
BTU/h 191,100
Power input kW 18.06
Current input A 30.4-28.9-27.9
EER kW/kW 3.10
Temp. range of Indoor W.B. 15.0~24.0°C (59~75°F)
cooling *3 Outdoor D.B. -5.0~52.0°C (23~126°F)
Heating capacity *2 kW 63.0
(Nominal) kcal/h 54,200
BTU/h 215,000
Power input kW 17.45
Current input A 29.4-27.9-26.9
COP kW/kW 3.61
Temp. range of Indoor D.B. 15.0~27.0°C (59~81°F)
heating *3 Outdoor W.B. -20.0~15.5°C (-4~60°F)
Indoor unit Total capacity 50~150% of outdoor unit capacity
connectable Model/Quantity WP10~125, W10~125/1~50
Sound pressure level (measured in anechoic room) *4 dB <A> 63.5/64.5
Sound power level (measured in anechoic room) *4 dB <A> 82.0/84.0
Refrigerant High pressure mm (in.) 19.05 (3/4) Brazed
piping diameter Low pressure mm (in.) 28.58 (1-1/8) Brazed
FAN Type x Quantity Propeller fan x 2
Air flow rate m3/min 295
L/s 4,917
cfm 10,416
Control, Driving mechanism Inverter-control, Direct-driven by motor
Motor output kW 0.92 x 2
*5 External static press. 0 Pa (0 mmH2O)
Compressor Type Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter
Motor output kW 13.8
Case heater kW - (- V)
Lubricant MEL46EH
External finish Pre-coated galvanized steel sheets (+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension H x W x D mm 1,858 (1,798 without legs) x 1,750 x 740
in. 73-3/16 (70-13/16 without legs) x 68-15/16 x 29-3/16
Protection devices High pressure protection High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Inverter circuit (COMP./FAN) Over-heat protection, Over-current protection
Compressor -
Fan motor -
Refrigerant Type x original charge R32 x 10.8 kg (24 lbs)
Control HBC controller
Net weight kg (lbs) 348 (768)
Heat exchanger Salt-resistant cross fin & aluminium tube
HIC circuit (HIC: Heat Inter-Changer) -
Defrosting method Auto-defrost mode (Reversed refrigerant cycle)
Drawing External WKL94T603
Wiring WKE94G771
Standard attachment Document Installation Manual
Accessory -
Optional parts
Main HBC controller: CMB-WM108,1016V-AA
Sub HBC controller: CMB-WM108,1016V-AB
Remarks Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be
referred to the Installation Manual.
Due to continuing improvement, above specifications may be subject to change without notice.
Notes: Unit converter
1.Nominal cooling conditions (subject to JIS B8615-2)
Indoor: 27°CD.B./19°CW.B. (81°FD.B./66°FW.B.), Outdoor: 35°CD.B./24°CW.B. (95°FD.B./75°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-2)
Indoor: 20°CD.B. (68°FD.B.), Outdoor: 7°CD.B./6°CW.B. (45°FD.B./43°FW.B.)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.-5°CD.B. (23°FD.B.)/-6°CW.B. (21°FW.B.) to 21°CD.B. (70°FD.B.)/15.5°CW.B. (60°FW.B.)
with cooling/heating mixed operation.
4.Cooling mode/Heating mode
5.External static pressure option is available (30 Pa, 60 Pa, 80 Pa/3.1 mmH2O, 6.1 mmH2O, 8.2 mmH2O).
Consult your dealer about the specification when setting External static pressure option.
6.R32 is flammable, and certain restrictions apply to the installation of units.
When installing new units, moving the existing units, or changing the layout of the room,
ensure that installation restrictions are observed.
For detail, refer to the section in the Databook on installation restrictions.
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg/0.4536
*Above specification data is
subject to rounding variation.
0000005068.BOOK 15 ページ ２０１８年１１月２６日 月曜日 午後３時４６分

MEES18K068
PURY-M-YNW-A1, EM-YNW-A1
16
2. EXTERNAL DIMENSIONS R2-Series
2. EXTERNAL DIMENSIONS
PURY-M200, 250, 300YNW-A1(-BS)
Unit: mm
13
4
7
Intake air
Front view
Intake air
Intake air
Discharge air
Left side view
Rear view
2
5
6
8
(Mounting pitch)
Bottom view
(Mounting pitch)
2×5-ø4.6 Hole (Make hole at the plastic fan guard
for snow hood attachment)
<Snow hood attachment hole>
Top view
Sling hole
Detachable leg
(front and back, 2 points)
Note 2*
2×2-14×31 Oval hole 2×2-14×20 Oval hole(without detachable leg)
Intake air
Refrigerant service valve <High pressure> Refrigerant service valve <Low pressure>
Service panel
Control box (INV Box)
Control box
(MAIN Box)
For transmission cables
For wires
For pipes
NO.
Usage Specifications
Front through hole Bottom through hole Front through hole Front through hole Bottom through hole Bottom through hole Front through hole
148 × 84 Knockout hole ø65 or ø40 Knockout hole ø52 or ø27 Knockout hole ø65 Knockout hole ø52 Knockout hole ø34 Knockout hole 150 × 94 Knockout hole
Connecting pipe specifications
ø34 Knockout hole
Note 1.Please refer to the next page for information regarding necessary
spacing around the unit and foundation work.
2.The detachable leg can be removed at site. 3.At brazing of pipes, wrap the refrigerant service valve
with wet cloth and keep the temperature of refrigerant service valve under 120°C.
4.This unit has restrictions for the safety, so refer to
SAFETY HANDLING FOR R32 or the Installation Manual.
*1 Connect the refrigerant pipe to the service valve
according to the Installation Manual.
Bottom through hole
Model
Diameter
Refrigerant pipe Service valve
M250
ø22.2
ø22.2 Brazed *1
ø15.88 Brazed *1
ø28.58
M200
High pressure Low pressure
M300
High pressure Low pressure
ø19.05 Brazed *1
132
207
256
148125
90
110
125
1495 303
1798
(60)
1858
5656 20
54
592
110
185
681(678~684)
29.5
(740)
80760
80
166
181
152
172
216
160 243
150128
94 79
181
29.5
84
71
35
920
19.519.5 881
740
150
600=150×470
54
20
116
(60)
1 2 4 3 5 6 7 8
0000005068.BOOK 16 ページ ２０１８年１１月２６日 月曜日 午後３時４６分

MEES18K068
PURY-M-YNW-A1, EM-YNW-A1
17
2. EXTERNAL DIMENSIONS R2-Series
Unit: mm
PURY-M200, 250, 300YNW-A1(-BS)
Front Front
<Top view>
*
<Unit:mm>
<Top view>
M10 anchor bolt
<field supply required> Fixing plate
<field supply required>
<To be left open>
Front
Wall <H>
<To be left open>
Front
<Unit:mm>
Fixing plate
<field supply required>
M10 anchor bolt
<field supply required>
Wall <H>
<To be left open>
<To be left open>
<To be left open>
Front
Wall <H> Wall <H>
Wall <H>
Wall <H>
Front
Front
<To be left open>
Wall <H>
Front
Wall <H>
<To be left open>
<To be left open>
Front
Front
Front
Wall <H>
Wall <H>
Front
<To be left open>
<To be left open>
Detachable leg
Fig.A (without detachable legs)
Fig.B (with detachable legs)
Fig.C (without detachable legs) Fig.D (with detachable legs)
Detachable leg
<Wall height limit> Front :Up to the unit height
Back :Up to the unit height Side :Up to the unit height
<Side view>
Front
1. Required space around the unit
●In case of single installation
1 Secure enough space around the unit as shown in the figure below.
· With a space of at least
300mm to the wall on the back of the unit
2 When the height of the walls on the front, back or on the sides<H>
exceeds the wall height limit as defined below add the height that exceeds the height limit <h> to the figures that are marked with an asterisk.
2. Foundation work
1 Take into consideration the surface strength, water drainage route,
piping route, and wiring route when preparing the installation site. <Note that the drain water comes out of the unit during operation.>
2 Build the foundation in such way that the corner of the installation leg is
securely supported as shown in the right figure.(Fig.A,B) When using a rubber isolating cushion, please ensure it is large enough to cover the entire width of each of the unit's legs.
3 The protrusion length of the anchor bolt must not exceed 30mm.(Fig.A,B) 4 Use four fixing plates as shown in the right figure <field supply required>
when using post-installed anchor bolts.(Fig.C,D)
5
To prevent small animals and water and snow from entering the unit and damaging its parts,
close the gap around the edges of through holes for pipes and wires with filler plates <field supply required>.
6 When the pipes or cables are routed at the bottom of the unit,
make sure that the through hole at the base of the unit does not get blocked with the installation base.
7 Refer to the Installation Manual when installing units on an installation base.
●In case of collective installation
· With a space of at least
100mm to the wall on the back of the unit
15 min. 50 min.* 50 min.*
100 min.*
450 min.*
300 min.*
100 min.30 min.
450 min.450 min.* 450 min. 100 min.*
450 min.* 100 min.*
450 min.*
1000 min.*
900 min.
300 min.*
900 min. 300 min.*300 min.*
15 min.*
450 min.450 min.
450 min.* 300 min.*
15 min.*
30mm max.30mm max.
Unit height h
H
Unit height h
H
1 When multiple units are installed adjacent to each other, secure enough space to allow
for air circulation and walkway between groups of units as shown in the figures below.
2 At least two sides must be left open. 3 As with the single installation, add the height that exceeds the height limit<h>
to the figures that are marked with an asterisk.
4 If there is a wall at both the front and the rear of the unit, install up to six units
consecutively in the side direction and provide a space of 1000mm or more as inlet space/ passage space for each six units.
0000005068.BOOK 17 ページ ２０１８年１１月２６日 月曜日 午後３時４６分

MEES18K068
PURY-M-YNW-A1, EM-YNW-A1
18
2. EXTERNAL DIMENSIONS R2-Series
PURY-M350,400,450YNW-A1(-BS)
Unit: mm
Note 1.Please refer to the next page for information regarding necessary
spacing around the unit and foundation work.
2.The detachable leg can be removed at site. 3.At brazing of pipes, wrap the refrigerant service valve
with wet cloth and keep the temperature of refrigerant service valve under 120°C.
4.This unit has restrictions for the safety, so refer to
SAFETY HANDLING FOR R32 or the Installation Manual.
NO.
1 2 4 3 5 6 7 8
740
70
150 85 85130 150
18
1204
18
1240
110
(740)
185
29.5
681(678~684)
29.5
94 79
181
160 243
150
128
125
132
207
256
90
110
8471
35
56
116
(60)
20
54
592
54
20
56
148
152
216
166
125
(60)
3031495
1798
1858
90
1060
90
172
2
5
68
(Mounting pitch)
Bottom view
(Mounting pitch)
2×2-14×31 Oval hole 2×2-14×20 Oval hole(without detachable leg)
1
Sling hole
Detachable leg (front and back, 2 points) Note 2*
Control box
3
4
7
Service panel
Intake
air
Intake
air
Discharge air
Intake
air
Intake
air
2×6-ø4.6 Hole (Make hole at the plastic fan guard
for snow hood attachment)
<Snow hood attachment hole>
Top view
Front view
Left side view
Rear view
Refrigerant service valve <High pressure> Refrigerant service valve <Low pressure>
For transmission cables
For wires
For pipes
Usage Specifications
Front through hole Bottom through hole Front through hole Front through hole Bottom through hole Bottom through hole Front through hole
148 × 84 Knockout hole ø65 or ø40 Knockout hole ø52 or ø27 Knockout hole ø65 Knockout hole ø52 Knockout hole ø34 Knockout hole 150 × 94 Knockout hole
Connecting pipe specifications
ø34 Knockout hole
*1 Connect the refrigerant pipe to the service valve
according to the Installation Manual.
Bottom through hole
Model
Diameter
Refrigerant pipe Service valve
M400
ø28.58
ø15.88 Brazed *1
ø28.58
M350
High pressure Low pressure
ø28.58 Brazed
ø19.05 Brazed *1
M450
High pressure Low pressure
0000005068.BOOK 18 ページ ２０１８年１１月２６日 月曜日 午後３時４６分