Mitsubishi Electric PAR-30MAA User manual

UserGuide
Controls
PAR-30MAA
BackUpandRotate
PAR-30MAA Back Up and Rotate
Select the Main enu by pressing
In the main menu screen move the
cursor using F1/F2 to Service
option and press
F1 F2
1.
Move the cursor next to the Check
option and press
3.
Then select Request code
and press
4.
In the Request code screen enter
the outdoor unit address and the
appropriate rotation setting -
see list on reverse.
Outdoor unit address is the same
as the refrigerant address.
5.
Enter aintenance password
(default is 9999)
2.
Repeat step 5 for the slave unit as
both ref addresses (both outdoor
units) need a code request in order
for back up and rotate to operate.

UNITEDKINGDOMMitsubishiElectricEurope Living Environmental Systems Division
Travellers Lane, Hatfield, Hertfordshire, AL10 8XB, England General Enquiries Telephone: [phone] Fax: [phone]
IRELANDMitsubishiElectricEurope Westgate Business Park, Ballymount, Dublin 24, Ireland
Telephone: Dublin [phone] Fax: Dublin [phone] International code: (003531)
Telephone: 01707282880
email: airconditioning@ euk. ee.co web: www.airconditioning. itsubishielectric.co.uk
Country of origin: United Kingdom – Japan – Thailand – Malaysia. ©Mitsubishi Electric Europe 2011. Mitsubishi and Mitsubishi Electric are trademarks of Mitsubishi Electric Europe B.V. The company reserves the right to make any variation in technical specification to the equipment described, or
to withdraw or replace products without prior notification or public announcement. Mitsubishi Electric is constantly developing and improving its products. All descriptions, illustrations, drawings and specifications in this publication present only general particulars and shall not form part of any
contract. All goods are supplied subject to the Company’s General Conditions of Sale, a copy of which is available on request. Third-party product and brand names may be trademarks or registered trademarks of their respective owners.
UserGuide
Controls
PAR-30MAA
BackUpandRotate
Request Code List
Rotation Setting
Setting No.
(Request Code)
Initial
Setting
Setting Contents
o.1 (310)
o.2 (311)
o.3 (312)
o.4 (313)
o.5 (314)
o.6 (315)
o.7 (316)
o.8 (317)
o.9 (318)
Monitoring the request code of current setting
Rotation and Back-up off ( ormal group control operation)
Back-up function only
Rotation O (Alternating interval = 1 day) and back up function
Rotation O (Alternating interval = 3 day) and back up function
Rotation O (Alternating interval = 5 day) and back up function
Rotation O (Alternating interval = 7 day) and back up function
Rotation O (Alternating interval = 14 day) and back up function
Rotation O (Alternating interval = 28 day) and back up function
2nd Stage Cut-in Setting
Setting No.
(Request Code)
Initial
Setting
Setting Contents
o.1 (320)
o.2 (321)
o.3 (322)
o.4 (323)
o.5 (324)
Monitoring the request code of current setting
Cut-in Function OFF
Cut-in Function O (Set point = Set temp. +4ºC(7.2ºF)
Cut-in Function O (Set point = Set temp. +6ºC(10.8ºF)
Cut-in Function O (Set point = Set temp. +8ºC(14.4ºF)

Related Links Model Number: PAR-30MAA
Controls Brochure
M Series and Mr Slim Optional Parts
PAR-30MAA Simple Instruction Book WT05949X01
PAR-30MAA Installation Manual WT05950X01
PAR-30MAA Declaration of Conformity
PAR-30MAA_Rotation_Guide
PAR-30MAA_User_Guide