Mitsubishi Electric 800 Series User manual

INVERTER
INVERTER FR-E800 Instruction Manual (Communication)
A
HEAD OFFICE: TOKYO BUILDING 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
IB(NA)-0600871ENG-A(1912)MEE Printed in Japan Specifications subject to change without notice.
FR-E800
Instruction Manual (Communication)
Compact, high functionality inverters

1
CONTENTS
Chapter 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.1 Product checking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1.2 About the related manuals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Chapter 2 Ethernet Communication . . . . . . . . . . . . . . . . . . . . . . 10
2.1 Outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.2 Wiring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.2.1 System configuration example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.2.2 Network configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.2.3 Network components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.3 Ethernet cable connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.3.1 Wiring method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.3.2 Wiring precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.4 Initial setting for Ethernet communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.5 CC-Link IE TSN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2.5.1 Outline. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2.5.2 CC-Link IE TSN configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2.5.3 Parameters related to CC-Link IE TSN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2.6 CC-Link IE Field Network Basic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
2.6.1 Outline. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
2.6.2 CC-Link IE Field Network Basic configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
2.6.3 Initial setting for CC-Link IE Field Network Basic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
2.6.4 Parameters related to CC-Link IE Field Network Basic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
2.7 MODBUS/TCP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
2.7.1 Outline. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
2.7.2 Initial setting for MODBUS/TCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
2.7.3 Parameters related to MODBUS/TCP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
2.8 BACnet/IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
2.8.1 Outline. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
2.8.2 Initial setting for BACnet/IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
2.8.3 Parameters related to BACnet/IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
2.9 MELSOFT / FA product connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
2.9.1 Outline. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
2.9.2 Initial setting for MELSOFT / FA product connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
2.9.3 Parameters related to MELSOFT / FA product connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
2.10 SLMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
2.10.1 Outline. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
2.10.2 Initial setting for SLMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
2.10.3 Parameters related to SLMP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

2
2.11 EtherNet/IP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
2.11.1 Outline. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
2.11.2 Initial setting for EtherNet/IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
2.11.3 Parameters related to EtherNet/IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
2.11.4 Object map definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
2.11.5 Object map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
2.12 PROFINET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
2.12.1 Outline. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
2.12.2 Initial setting for PROFINET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
2.12.3 Data Exchange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
2.13 Inverter-to-inverter link function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
2.14 Ethernet communication parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121
Chapter 3 RS-485 Communication . . . . . . . . . . . . . . . . . . . . . . 126
3.1 Outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
3.2 Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
3.2.1 Wiring procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
3.2.2 Connected device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
3.3 Wiring of PU connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
3.4 Mitsubishi inverter protocol (computer link communication). . . . . . . . . . . . . . . . . . . . . . . . . .130
3.5 MODBUS RTU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142
Chapter 4 Other Communication Options . . . . . . . . . . . . . . . . 156
4.1 USB device communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .156
4.2 Automatic connection with GOT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157
Chapter 5 Common Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 160

3
CHAPTER 1
CHAPTER 1
4
5
6
7
8
9
10
Introduction
1.1 Product checking ......................................................................................................................................................6
1.2 About the related manuals........................................................................................................................................8

41. Introduction
1Introduction
The contents described in this chapter must be read before using this product.
Always read the instructions before use.
Abbreviations
Digital characters and their corresponding printed equivalents
Trademarks
• Ethernet is a registered trademark of Fuji Xerox Corporation in Japan.
• MODBUS is a registered trademark of SCHNEIDER ELECTRIC USA, INC.
• BACnet is a registered trademark of the American Society of Heating, Refrigerating and Air-Conditioning Engineers
(ASHRAE).
• EtherNet/IP is a registered trademark of ODVA (Open DeviceNet Vendor Association, INC).
• PROFINET is a trademark of PROFIBUS Nutzerorganisation e.V. (PNO).
• Other company and product names herein are either trademarks or registered trademarks of their respective owners.
Notes on descriptions in this Instruction Manual
• Connection diagrams in this Instruction Manual appear with the control logic of the input terminals as sink logic, unless
otherwise specified. (Refer to the FR-E800 Instruction Manual (Connection) for the switching of the control logic of the
inverter.)
Item Description
PU Operation panel
Inverter Mitsubishi Electric inverter FR-E800 series
Pr. Parameter number (Number assigned to function)
PU operation Operation using the PU (operation panel)
External operation Operation using the control circuit signals
Combined operation Combined operation using the PU (operation panel) and External operation
Mitsubishi Electric standard efficiency motor SF-JR
Mitsubishi Electric constant-torque motor SF-HRCA
Mitsubishi Electric premium efficiency motor SF-PR
0123456789ABC
DEFGH I JKLMNOP
QRSTUVWXYZ - _

5
1. Introduction
1
2
3
4
5
6
7
8
9
10
Precautions
Some of the communication protocols and the plug-in options cannot be used together as shown in the following table. For the
application and protocol settings, refer to page 122.
CC-Link IE TSN
CC-Link IE Field Network Basic
BACnet/IP
EtherNet/IP
PROFINET
CC-Link (when the FR-A8NC E kit is installed)
CC-Link IE TSN — × × × ×
CC-Link IE Field Network Basic × — ×
BACnet/IP — ×
EtherNet/IP × — ×
PROFINET × × × —
CC-Link (when the FR-A8NC E kit is installed) × × —

61. Introduction
1.1 Product checking
1.1 Product checking
Inverter model
• A: The voltage class is shown.
• B: The inverter rated capacity or the inverter rated current is shown.
• C: The communication type and the functional safety specification are shown.
• D: The output specification for monitoring and the rated frequency are shown for the RS-485 model, and the
communication protocol group is shown for the Ethernet model.
FR-E8 0-
A B C D E
Rating plate
Input rating
Output rating
SERIAL
Inverter model
INPUT :XXXXX
MODEL :FR-E820-0008EPA
OUTPUT:XXXXX
SERIAL:XXXXXXXXXXX
MADE IN XXXXX
Country of origin
Symbol Voltage class
2 200 V class
4 400 V class
6 575 V class
Symbol Description
0.1K to 7.5K Inverter ND rated capacity (kW)
0008 to 0170 Inverter ND rated current (A)
Symbol Communication / functional safety
None RS-485 + SIL2/PLd
E Ethernet + SIL2/PLd
Symbol Monitor output / rated frequency / communication protocol
-1 Pulse (terminal FM), 60 Hz
-4 Voltage (terminal AM), 50 Hz
-5 Voltage (terminal AM), 60 Hz
PA Protocol group A (CC-Link IE TSN, CC-Link IE Field Network Basic, MODBUS/TCP, EtherNet/IP, and BACnet/IP)
PB Protocol group B (CC-Link IE TSN, CC-Link IE Field Network Basic, MODBUS/TCP, PROFINET)

7
1. Introduction
1.1 Product checking
1
2
3
4
5
6
7
8
9
10
• E: Availability of circuit board coating / plated conductors is shown.
*1 Conforming to IEC 60721-3-3 3C2
How to read the SERIAL number
Symbol Circuit board coating*1 Plated conductor
None Without coating Without plated conductors
-60 With coating Without plated conductors
-06 With coating With plated conductors
The SERIAL consists of two symbols, three characters indicating the production
year and month, and six characters indicating the control number.
The last digit of the production year is indicated as the Year, and the Month is
indicated by 1 to 9, X (October), Y (November), or Z (December).
Rating plate example
Symbol Year Month Control number
SERIAL

81. Introduction
1.2 About the related manuals
1.2 About the related manuals
About the related manuals
The manuals related to FR-E800 are as follows.
Manual name Manual number
FR-E800 Inverter Safety Guideline IB-0600857ENG
FR-E800-E Inverter Safety Guideline IB-0600860ENG
FR-E860 Inverter Safety Guideline IB-0600862ENG
FR-E860-E Inverter Safety Guideline IB-0600863ENG
FR-E800 Instruction Manual (Connection) IB-0600865ENG
FR-E860 Instruction Manual (Connection) IB-0600906ENG
FR-E800 Instruction Manual (Function) IB-0600868ENG
FR-E800 Instruction Manual (Maintenance) IB-0600874ENG
FR Configurator2 Instruction Manual IB-0600516ENG
PLC Function Programming Manual IB-0600492ENG
FR-E800 Instruction Manual (Functional Safety) BCN-A23488-000

9
CHAPTER 2
CHAPTER 2
4
5
6
7
8
9
10
Ethernet Communication
2.1 Outline ....................................................................................................................................................................10
2.2 Wiring......................................................................................................................................................................11
2.3 Ethernet cable connection ......................................................................................................................................13
2.4 Initial setting for Ethernet communication...............................................................................................................15
2.5 CC-Link IE TSN ......................................................................................................................................................16
2.6 CC-Link IE Field Network Basic..............................................................................................................................33
2.7 MODBUS/TCP........................................................................................................................................................55
2.8 BACnet/IP ...............................................................................................................................................................68
2.9 MELSOFT / FA product connection........................................................................................................................81
2.10 SLMP ......................................................................................................................................................................84
2.11 EtherNet/IP .............................................................................................................................................................99
2.12 PROFINET............................................................................................................................................................113
2.13 Inverter-to-inverter link function ............................................................................................................................118
2.14 Ethernet communication parameters....................................................................................................................121

10 2. Ethernet Communication
2.1 Outline
2Ethernet Communication
2.1 Outline
Precautions for communication
• In order to protect the inverter and the system against unauthorized access by external systems via network, take security
measures that include firewall settings.
• Depending on the network environment, the inverter may not operate as intended due to delays or disconnection in
communication. Carefully consider what type of environment the inverter will be used in and any safety issues related to
its use.
Ethernet communication specifications
The communication specification varies depending on the specification of the master or the communication protocol.
Operation status LEDs
*1 While "1 (initial value)" is set in Pr.1399 Inverter identification enable/disable selection, this LED blinks when the MAC/IP address of the
inverter match to the MAC/IP address specified by using engineering software such as FR Configurator2.
Item Description
Category 100BASE-TX/10BASE-T
Data transmission speed 100 Mbps (100BASE-TX) / 10 Mbps (10BASE-T)
Transmission method Baseband
Maximum segment length 100 m between the hub and the inverter
Number of cascade connection stages Up to 2 (100BASE-TX) / up to 4 (10BASE-T)
Topology Line, start, or a combination of line and star
Interface RJ-45
Number of interfaces available 2
IP version IPv4
LED name Description LED status Remarks
NS Communication status OFF Duplicate IP address not detected
Red Duplicate IP address detected
MS Inverter status
OFF Power-OFF / inverter reset
Green Operating properly
Red Fault detected
LINK1 Connector for communication
(PORT1) status
OFF Power-OFF/link-down
Blinking green Link-up (Data reception in progress)
Solid green Link-up
LINK2 Connector for communication
(PORT2) status
OFF Power-OFF/link-down
Blinking green Link-up (Data reception in progress)
Solid green Link-up
NET SLMP command request message
reception status
OFF Power-OFF / inverter identification disabled /
inverter identification paused
Blinking green Inverter identification in progress*1
Solid green Network operation mode

11
2. Ethernet Communication
2.2 Wiring
1
2
3
4
5
6
7
8
9
10
2.2 Wiring
2.2.1 System configuration example
1. Select the connection method. (refer to page 11).
2. Prepare the equipment required for wiring. (Refer to page 11.)
3. Turn OFF the power of the programmable controller and the inverters.
4. Connect the master station and the inverters with Ethernet cables. (Refer to page 13.)
2.2.2 Network configuration
Network topology
The network can be wired into star topology or line topology. A network can consist of a combination of star and line topologies.
Station number and connection position
Modules can be connected in any order regardless of the station number.
Replacing CC-Link IE TSN devices
For star topology, slave stations can be replaced without powering off the whole system.
NOTE
• Refer to the Master Module User's Manual for detailed network configurations.
2.2.3 Network components
Connection cable
Use Ethernet cables compliant with the following standards.
• Recommended product (as of April 2019)
*1 SC-E5EW cable is for in-enclosure and indoor uses. SC-E5EW-L cable is for outdoor use.
Inverter
Motor
Power
supply
Inverter
Motor
Power
supply
Slave station
Ethernet cable
Master station
Item Description
Star topology Modules are configured into a star using a switching hub and Ethernet cables. Slave stations can be easily added in a
star topology. Furthermore, data link continues among normally-operating stations in a star topology.
Line topology Modules are configured into a line with Ethernet cables. A switching hub is not required.
Ethernet cable Connector Type
Category 5 or higher straight cable (double
shielded / STP) RJ-45 connector
The following conditioning cables:
• IEEE 802.3 (100BASE-TX)
• ANSI/TIA/EIA-568-B (Category 5)
Model Manufacturer
SC-E5EW series*1 Mitsubishi Electric System & Service Co., Ltd.

12 2. Ethernet Communication
2.2 Wiring
NOTE
• Depending on the cable connector shape, the cable may not be connected to the inverter.
Hubs
Use hubs that meet the following conditions. Operation is not guaranteed if the hubs do not meet these conditions.
• Compliance with the IEEE 802.3 (100BASE-TX)
• Support of the auto MDI/MDI-X function
• Support of the auto-negotiation function
• Switching hub (layer 2 switch)*1
*1 A repeater hub is not available.
Industrial switching hub
Model Manufacturer
NZ2EHG-T8N Mitsubishi Electric Corporation
NZ2EHG-T8 (discontinued product) Mitsubishi Electric Corporation
DT135TX Mitsubishi Electric System & Service Co., Ltd.

13
2. Ethernet Communication
2.3 Ethernet cable connection
1
2
3
4
5
6
7
8
9
10
2.3 Ethernet cable connection
This section explains Ethernet cable connection and the relevant precautions. For the details of the network configuration and
the cables and hubs used for wiring, refer to page 11 onwards.
2.3.1 Wiring method
Reinstallation
1. Turn OFF the power of the programmable controller and the inverters.
2. Remove the inverter front cover.
3. Check the orientation of the connectors. Insert the connector part of the Ethernet cable to the communication
connector on the inverter until it clicks.
Disconnection
1. Turn OFF the power of the programmable controller and the inverters.
2. Remove the inverter front cover.
3. Hold down the latch on the Ethernet cable connector, and pull out the cable while holding the latch.
NOTE
• There is no need to distinguish between PORT1 and PORT2 on the inverter (except for PROFINET).
• When only one connector is used in star topology, either PORT1 or PORT2 is applicable. (Use PORT1 for PROFINET.)
• When using two connectors for line topology, an Ethernet cable can be connected to the connectors in any combination. For
example, the cable can be connected across two of PORT1 or across PORT1 and PORT2. (For PROFINET, use PORT1
for connection with the master, and use PORT2 for connection with PORT1 of the adjacent inverter.)

14 2. Ethernet Communication
2.3 Ethernet cable connection
2.3.2 Wiring precautions
This section explains Ethernet cable connection and the relevant precautions.
Handling of the Ethernet cable
• Do not touch the conductors of the cable or the connector on the inverter. Keep the conductors free of dust or dirt. If oil
from your hand, dirt or dust is attached to the core, it can increase transmission loss, arising a problem in data link.
• Check the following:
Is any Ethernet cable disconnected?
Is any of the Ethernet cables shorted?
Are the connectors securely connected?
• Do not use Ethernet cables with broken latches. Doing so may cause the cable to unplug or malfunction.
• The maximum station-to-station distance is 100 m. However, the distance may be shorter depending on the operating
environment of the cable. For details of the cable, contact your cable manufacturer.
Connecting and disconnecting of the Ethernet cable
Hold the connector part when connecting and disconnecting the Ethernet cable. Pulling a cable connected to the inverter may
damage the inverter or cable, or result in malfunction due to poor contact.
Network configuration
Check the network configuration before wiring, and perform correct wiring.
Connection between
PORT1 and PORT1, PORT2 and PORT2
Connection between
PORT1 and PORT2
Connector
for
communication
(PORT2)
Connector
for
communication
(PORT1)
Connector
for
communication
(PORT2)
Connector
for
communication
(PORT1)
Connector
for
communication
(PORT2)
Connector
for
communication
(PORT1)
Connector
for
communication
(PORT2)
Connector
for
communication
(PORT1)
Connector
for
communication
(PORT2)
Connector
for
communication
(PORT1)
Connector
for
communication
(PORT2)
Connector
for
communication
(PORT1)
To the next
connector for
communication
(PORT2)
To the next
connector for
communication
(PORT2)
Connection between
PORT2 and PORT1 (PROFINET)
To the next
connector for
communication
(PORT1)

15
2. Ethernet Communication
2.4 Initial setting for Ethernet communication
1
2
3
4
5
6
7
8
9
10
2.4 Initial setting for Ethernet communication
Use the following parameters to perform required settings for Ethernet communication between the inverter and other devices.
To make communication between other devices and the inverter, perform the initial settings of the inverter parameters to match
the communication specifications of the devices. Data communication cannot be made if the initial settings are not made or if
there is any setting error.
*1 The setting is applied after an inverter reset or next power-ON.
IP address (Pr.1434 to Pr.1437)
Enter the IP address of the inverter to be connected to Ethernet in Pr.1434 to Pr.1437. (Enter the IP address assigned by the
network administrator.)
Pr. Name Initial
value
Setting
range Description
1434
N600*1 Ethernet IP address 1 192
0 to 255 Enter the IP address of the inverter to be connected to Ethernet.
1435
N601*1 Ethernet IP address 2 168
1436
N602*1 Ethernet IP address 3 50
1437
N603*1 Ethernet IP address 4 1
* * * . * * * . * * * . * * *
Set the value in the first octet in Pr.1434.
Set the value in the second octet in Pr.1435.
Set the value in the third octet in Pr.1436.
Set the value in the fourth octet in Pr.1437.

16 2. Ethernet Communication
2.5 CC-Link IE TSN
2.5 CC-Link IE TSN
2.5.1 Outline
Data can be transmitted to IT systems while performing real-time cyclic communication control.
CC-Link IE TSN authentication classes
• Devices (nodes) and switches on the CC-Link IE TSN network are classified into different authentication classes according
to their functionality and performance. There are two authentication classes: A and B. For details of the authentication class
of each product, check the information on the web site of the CC-Link Partner Association, or refer to catalogs and manuals
of each product. Different functions and system configurations are available depending on the authentication class of the
devices to be used. For example, use authentication class B devices to construct a high-speed motion control system. For
details of system construction such as mixing devices of both class A and class B, check the manuals of the applicable
master device.
Communication specifications
The communication specification varies depending on the specification of the master.
NOTE
• To use the CC-Link IE TSN, do not install the FR-A8NC to the inverter. (Installing the FR-A8NC E kit disables CC-Link IE TSN.)
Operation status LEDs
Item Description
Transmission speed 100 Mbps (10 Mbps is not supported.)
Minimum synchronization cycle 5000.00 μs
Authentication class Authentication class A
Communication method Time sharing method
Synchronization function Conforms to IEEE 1588v2
Maximum number of connected units 121 units (sum of master and slave stations)
Maximum number of branches No upper limit on the same Ethernet network
Connection cable Ethernet cable (IEEE 802.3 100BASE-TX compliant cable or ANSI/TIA/EIA-568-B (Category 5)
compliant shielded 4-pair branched cable)
Node type Slave station
Maximum cyclic size (of
one node)
RX 32 bits
RY 32 bits
RWr 32 words
RWw 32 words
LED name Description LED status Remarks
NS Communication status
OFF Power-OFF
Blinking green Data transmission not performed
Solid green Data transmission in progress
Blinking red Communication interrupted
Solid red Duplicate IP address detected
MS Inverter status
OFF Power-OFF / inverter reset
Green Operating properly
Red Fault detected
LINK1 Connector for communication (PORT1) status
OFF Power-OFF/link-down
Blinking green Link-up (Data reception in progress)
Solid green Link-up
LINK2 Connector for communication (PORT2) status
OFF Power-OFF/link-down
Blinking green Link-up (Data reception in progress)
Solid green Link-up

17
2. Ethernet Communication
2.5 CC-Link IE TSN
1
2
3
4
5
6
7
8
9
10
2.5.2 CC-Link IE TSN configuration
Procedure
The following shows the procedure to connect the inverter with a Mitsubishi Electric master device.
Before communication
1. Connect each unit with an Ethernet cable. (Refer to page 13.)
2. Enter the IP address (Pr.1434 to Pr.1437). (Refer to page 15.)
3. Reset the inverter, or turn OFF and then ON the power.
Registering a profile
1. Start GX Works3.
2. On the menu bar, select [Tool] > [Profile Management] > [Register...].
3. Select a CSP+ file to be registered on the "Register Profile" screen, and click the [Register] button.
NOTE
• A profile is a compressed file (such as *.zip, *.ipar, and *.cspp). Register a profile without decompressing the file.
• Profile registration is not required for the next time onwards.
Creating a project file
1. For information on creating and opening a project, go to [Help] > [GX Works3 Help].
Detecting an Inverter
Detection is not possible when the data link is not established with the master module. For details, refer to the Master Module
User's Manual.
1. In the "Navigation" window, select [Parameter] > [Module Information] then select the module name.
2. Select [Basic Settings] in the "Setting Item List" window.

18 2. Ethernet Communication
2.5 CC-Link IE TSN
3. In the "Setting Item" window, go to [Network Configuration Settings] then click next to the [Detailed Setting] field.
4. Click [Connected/Disconnected Module Detection] in the "CC-Link IE TSN configuration" window.
5. Read the cautions in the "Connected/Disconnected Module Detection" window and click [Execute].
6. The FR-E800-E will appear on the screen when it is detected. Click [Close with Reflecting the Setting] to close the
window.
System setting window
Communication speed setting of the master: 100 Mbps
1. Select [Basic Settings] in the "Setting Item List" window.
2. Set "5000.00 μs" or larger value for [Communication Period Interval Setting (Do not Set it in Units of 1us)].
3. Set "200.00 μs" for [System Reservation Time].
4. Set "Mixture of Authentication Class B/A or Authentication Class A Only" for [Authentication Class Setting].

19
2. Ethernet Communication
2.5 CC-Link IE TSN
1
2
3
4
5
6
7
8
9
10
5. Select [Application Settings] in the "Setting Item List" window.
6. Set "100 Mbps" for [Communication Speed].
Communication speed setting of the master: 1 Gbps
1. Select [Basic Settings] in the "Setting Item List" window.
2. In the "Setting Item" window, go to [Network Configuration Settings] then click next to the [Detailed Setting] field.
3. In the "CC-Link IE TSN Configuration" window, set "Low-Speed" for [Communication Period Setting].
Checking communication
The following table shows the status of the LEDs when communication is established between the programmable controller
and the inverter.
*1 The LED on either LINK1 or LINK2 will blink depending on the port (port 1 or 2) the Ethernet cable is connected to.
NS MS LINK1 LINK2
Solid green Solid green Blinking green*1