Mitsubishi Heavy Industries FDT71VNPVF1 Product guide

DATA BOOK
STANDARD INVERTER PACKAGED
AIR-CONDITIONERS
(Split system, air to air heat pump type)
CEILING CASSETTE-4WAY TYPE
FDT71VNPVF1
FDT90VNPVF1
FDT90VNPVF2
CEILING SUSPENDED TYPE
FDEN71VNPVF1
FDEN90VNPVF1
DUCT CONNECTED-HIGH STATIC
PRESSURE TYPE
FDU71VNPVF1
FDU90VNPVF1
FDU90VNPVF2
FLOOR STANDING TYPE
FDF71VNPVD1
FDF90VNPVD1
FDF90VNPVD2
WALL MOUNTED TYPE
SRK71VNPZM
DUCT CONNECTED-LOW/MIDDLE
STATIC PRESSURE TYPE
FDUM71VNPVF1
FDUM90VNPVF1
FDUM90VNPVF2
Service code
1 → L： to comply with amended
safety standard for LVD
Outdoor unit Changes
History of service code
FDC71VNP 1 L
FDC90VNP 1 L
Manual No.'13•PAC-DB-194
updated June 30, 2017
DATA BOOK

-
1
-
'13 • PAC-DB-194
1. GENERAL INFORMATION ............................................................................ 3
2. SPECIFICATIONS .......................................................................................... 11
CONTENTS
(2) Ceiling suspended type (FDEN) ........................................................... 13
(1) Ceiling cassette-4way type (FDT) ......................................................... 11
(2) Ceiling suspended type (FDEN) ........................................................... 55
(1) Ceiling cassette-4way type (FDT) ......................................................... 53
(4) Duct connected-Low / Middle static pressure type (FDUM) .................. 17
(3) Duct connected-High static pressure type (FDU) ................................. 15
(2) Duct connected-Low / Middle static pressure type (FDUM) .................. 52
(1) Duct connected-High static pressure type (FDU) ................................. 50
(5) Floor standing type (FDF) ..................................................................... 19
(6) Wall mounted type (SRK) ..................................................................... 21
(3) Remote control ...................................................................................... 34
(2) Ceiling suspended type (FDEN) ........................................................... 79
(1) Ceiling cassette-4way type (FDT) ......................................................... 72
(4) Duct connected-Low / Middle static pressure type (FDUM) ................. 89
(3) Duct connected-High static pressure type (FDU) ................................. 83
(3) Floor standing type (FDF) ..................................................................... 57
3. EXTERIOR DIMENSIONS .............................................................................. 22
(1) Indoor units ........................................................................................... 22
(2) Outdoor units ........................................................................................ 32
4. ELECTRICAL WIRING ................................................................................... 37
5. NOISE LEVEL ................................................................................................ 47
6. CHARACTERISTICS OF FAN ........................................................................ 50
7. TEMPERATURE AND VELOCITY DISTRIBUTION ...................................... 53
8. PIPING SYSTEM ............................................................................................ 58
9. RANGE OF USAGE & LIMITATIONS ............................................................ 60
(1) Indoor units ........................................................................................... 37
(2) Outdoor units ........................................................................................ 45
(1) Indoor units ........................................................................................... 47
(2) Outdoor units ........................................................................................ 49
10.2 Correction of cooling and heating capacity in relation to air flow rate control (fan speed)
10.3 Correction of cooling and heating capacity in relation to one way length of refrigerant piping
10.4 Height difference between the indoor unit and outdoor unit
................ 71
............ 71
............. 71
10. SELECTION CHART
10.1 Capacity tables ....................................................................................... 63
...................................................................................... 63
11. APPLICATION DATA
11.1 Installation of indoor unit ...................................................................... 72
..................................................................................... 72

-
2
-
'13 • PAC-DB-194
(5) Floor standing type (FDF) ..................................................................... 95
(6) Wall mounted type (SRK) ..................................................................... 99
(7) Effective range of cool/hot wind (Reference) .................................... 103
(1) FDT, FDEN, FDUM series ................................................................. 104
(2) FDU series ......................................................................................... 108
(3) FDF series ............................................................................................112
11.4 Installation of outdoor unit ....................................................................130
11.2 Electric wiring work installation ......................................................... 104
11.3 Installation of wired remote control (option) .......................................116
12. OPTION PARTS
12.1 Wireless kit ..............................................................................................144
12.3 Filter kit (FDUM series) ...........................................................................158
12.4 Interface kit (SC-BIKN-E) .........................................................................160
12.5 Super link E board (SC-ADNA-E) ............................................................164
12.2 Simple wired remote control (RCH-E3) .................................................152
(1) FDT series (RCN-T-36W-E) ..................................................................144
(2) FDEN series (RCN-E1R) .......................................................................146
(3) FDU, FDUM, FDF series (RCN-KIT3-E) ................................................150
.............................................................................................144
13. TECHNICAL INFORMATION .........................................................................166
(2) Ceiling suspended type (FDEN) ...........................................................168
(1) Ceiling cassette-4way type (FDT) .........................................................166
(4) Duct connected-Low / Middle static pressure type (FDUM) ..................172
(3) Duct connected-High static pressure type (FDU) .................................170
(5) Floor standing type (FDF) .....................................................................174
(6) Wall mounted type (SRK) .....................................................................176
■How to read the model name
FDT : Ceiling cassette-4way type
FDEN : Ceiling suspended type
FDU : Duct connected-High static pressuret type
FDUM : Duct connected-Middle static pressure type
FDF : Floor standing type
SRK : Wall mounted type
FDC : Outdoor unit
Example: FDT 90 VNP VF1
Series code
Applicable power source...See the specification
Product capacity
Model name

-
3
-
'13 • PAC-DB-194
1. GENERAL INFORMATION
(1) New line-up
New PAC series line up (40-140 class)
New
FDC71VNP (3HP)
●FDC90VNP (3.5HP)
1) New Standard Inverter Outdoor unit
2) Add new indoor unit connection
SRK71ZM-S can connect with FDC71VNP.
Outdoor units Indoor units
FDT...VF (Former model) FDT....VF1(Latest model) SRK-ZM-S
3HP
FDC71VNX FDT71VF,FDEN71VF
FDUM71VF,FDU71VD
FDF71VD
OK FDT71VF1,FDEN71VF1
FDUM71VF1,FDU71VF1
FDF71VD1
OK SRK71
ZM-S
N/A
FDC71VNP N/A OK OK
3.5HP FDC90VNP FDT100VF,FDEN100VF
FDUM100VF,FDU100VD
FDF100VD
N/A FDT100VF1,FDEN100VF1
FDUM100VF1
FDU100VF1,FDF100VD1
OK
N/A
4HP FDC100VN/VS
FDC100VNX/VSX OK OK
• “100” capacity indoor units can be connected to 3.5HP.
Connectable indoor unit
FDT FDEN FDU FDUM FDF SRK-ZM
Outdoor
unit
3HP
3.5HP
FDC71VNP &
SRC71ZM-S
can be
connected.

-
4
-
'13 • PAC-DB-194
(2) Specification comparison
(2)-1 3HP Specification
HYPER RAC New
FDC71VNX SRC71ZM-S FDC71VNP
FDT71VF1 SRK71ZM-S FDT71VF1
Power supply V 50Hz 220-240V
60Hz 220V 50Hz 220-240V 50Hz 220-240V
60Hz 220V
Cooling
Capacity Nominal kW 7.1 7.1 7.1
Range kW 3.2 - 8.0 2.15 - 8.0 1.4 - 7.1
EER - 3.48 3.29 2.84
SEER - 5.72 6.06 6.14
Efficiency class - A+ A+ A++
Sound power level dB(A) 66 66 67
Heating
Capacity
Nominal kW 8.0 8.0 7.1
Range kW 3.6 - 9.0 1.6 – 10 1.0 - 7.1
PdesignH kW 6.5 7.6 5.7
COP - 4.12 3.74 3.74
SCOP - 4.09 4.03 4.27
Efficiency class - A+ A+ A+
External dimension mm 750x880x340 750x880x340 640x800x290
Piping length Maximum m 50 30 30
Charge less m 30 15 15
Height difference O/U above m 30 20 20
O/U below m 15 20 20
Operation range Cooling deg.C -15 - +43 -15 - +46 -15 - +46
Heating deg.C -20 - +20 -15 - +21 -15 - +20
(2)-2 3.5HP Specification
Hyper Micro New
FDC100VNX FDC100VN FDC90VNP
FDT100VF1 FDT100VF1 FDT100VF1
Power supply V 50Hz 220-240V
60Hz 220V
50Hz 220-240V
60Hz 220V
50Hz 220-240V
60Hz 220V
Cooling
Capacity Nominal kW 10.0 10.0 9.0
Range kW 4.0 - 11.2 4.0 - 11.2 1.9 - 9.0
EER - 4.00 3.62 3.37
SEER - 5.84 5.61 6.73
Efficiency class - A+ A+ A++
Sound power level dB(A) 70 70 69
Heating
Capacity
Nominal kW 11.2 11.2 9.0
Range kW 4.0 - 12.5 4.0 - 12.5 1.5 - 9.0
PdesignH kW 13.5 9.7 8.1
COP - 4.34 4.09 4.11
SCOP - 3.96 3.92 4.11
Efficiency class - A A A+
External dimension mm 1300x970x370 845x970x370 750x880x340
Piping length Maximum m 100 50 30
Charge less m 30 30 15
Height difference O/U above m 30 30 20
O/U below m 15 15 20
Operation range Cooling deg.C -15 - +43 -15 - +43 -15 - +46
Heating deg.C -20 - +20 -20 - +20 -15 - +20

-
5
-
'13 • PAC-DB-194
(3)-1 Nominal / Maximum capacity
(3) Difference from other series
1) 3HP
●Ratio of cooling/heating
●Nominal capacity
●Minimum capacity
1
Maximum capacity
Lower than current model
Hyper New
Cooling/Heating Nom
/Max
Same
2) 3.5HP
Same
Hyper/Micro
(4HP)
New
(3.5HP)
0
1
2
3
4
5
6
7
EER
SEER
COP
SCOP
FDC71VNX
SRC71ZK-S
FDC71VNP
0
1
2
3
4
5
6
7
8
EER
SEER
COP
SCOP
FDC100VNX
FDC100VN
FDC90VNP
(3)-2 Efficiency
1) 3HP 2) 3.5HP
EER : energy efficiency ratio (efficiency of cooling) COP: coefficient of performance (efficiency of heating)
SEER,SCOP : Seasonal EER, Seasonal COP, defined by European standard EN14825.
It shows annual efficiency according to European climate condition. (Average)
Nominal efficiency becomes lower,
but seasonal efficiency becomes higher by optimizing control.
A++ A++
A+ A+

-
6
-
'13 • PAC-DB-194
0
0.05
0.1
0.15
0.2
0.25
Unit size
(m2)
FDC71VNX
SRC71ZK-S
FDC71VNP
0
10
20
30
40
50
60
70
Unit weight
(kg)
FDC71VNX
SRC71ZK-S
FDC71VNP
(3)-3 Unit size & weight
Become smaller and lighter.
1) 3HP 2) 3.5HP
33% down
25% down
45% down
52% down
FDC71VNX
FDC71VNP
FDC100VNX
FDC90VNP
FDC100VN
52% down
45% down
(3)-4 Pipe size and Piping length
both 1rank down Liquid pipe 1rank down
Shorter Shorter
Pipe size becomes smaller easy to install
Pipe length becomes shorter limit the installation flexibility
1) 3HP 2) 3.5HP
If indoor unit is FDF series,
chargeless pipe length:8m, max pipe length :23m
Liquid pipe 1rank down
Sho
rte
H
P
0
2
4
6
8
10
12
14
16
18
Pipe size (liquid)
Pipe size (gas)
FDC71VNX
SRC71ZK-S
FDC71VNP
0
10
20
30
40
50
60
Chargeless pipe
length
Max pipe length
FDC71VNX
SRC71ZK-S
FDC71VNP
FDC71VNP
(FDF71VF1)

-
7
-
'13 • PAC-DB-194
1) 3HP
2) 3.5HP
Limited piping length Smaller piping diameter
D6.35
D12.7
Gas
Liquid
D6.35 D9.52
D12.7 D15.88
D6.35
D15.88
D6.35 D9.52
Reducer(attached in O/U)
Pipe diameter adjustment is
necessary near indoor unit
(Liquid side is not necessary in case of SRK)
(3)-5 Piping system
1) 3HP
Hyper New
Muffler
Crank case
heater

-
8
-
'13 • PAC-DB-194
2) 3.5HP
Hyper
Crank case
heater
New
(4)-1 Combination
Outdoor units do not have plural
control.
Plural combination is prohibited.
Single only
<Plural control>
FDT40VF1
NO FDC71VNP
(4) Other features

-
9
-
'13 • PAC-DB-194
(4)-2 Cooling capacity characteristic
When ambient temperature is higher…
Cooling capacity become smaller to 85%.
Ambient temperature [ deg.C ]
100
35 43
85
Maximum capacity of other series
FDC71VNP
FDC90VNP
Cooling
42
44
46
48
50
52
54
56
58
Sound pressure level dB(A)
FDC100VNX
FDC100VN
FDC90VNP
FDC90VNP
(silent mode)
(4)-3 Sound level
(4)-4 Trial operation
No DIP switch for trial operation.
Sound pressure level becomes higher.
Silent mode is prepared. (note: capacity down to around 90%)
1) 3HP 2) 3.5HP

-
10
-
'13 • PAC-DB-194
(4)-5 Maintenance
(1)Mente PC is possible for maintenance.
Relay cable is necessary.
New RAM file is also needed.
RAMDATA_eR25V.xls FD CONVERTER
PCA006A075B
4pin
8pin
CNROM
(white)
Cable
PCZ504A065A
PCB
(2)Inverter checker is possible for
maintenance.
Short-connector is necessary.
(Short between Pin No.2 and No.3
of CNROM)
CNROM

-
11
-
'13 • PAC-DB-194
2. SPECIFICATIONS
(1) Ceiling cassette-4way type (FDT)
Model FDT71VNPVF1
Model
Item
FDT71VNPVF1
Indoor unit FDT71VF1 Outdoor unit FDC71VNP
Power source Single phase 220-240V 50Hz / 220V 60Hz
Operation
data
Nominal cooling capacity (range) kW 7.1 [ 1.4(Min.)
~ 7.1(Max.)]
Nominal heating capacity (range) kW 7.1 [ 1.0(Min.)
~ 7.1(Max.)]
Power Cooling
kW
2.50
consumption Heating 1.90
Max power consumption 3.27
Running Cooling
A
11.1 / 11.6
current Heating 8.5 / 8.9
Inrush current, max current 5, 14.5
Power factor Cooling %98 / 98
Heating 97 / 97
EER Cooling 2.84
COP Heating 3.74
Sound power level Cooling
dB(A)
64 67
Heating
Sound pressure level Cooling P-Hi : 46 Hi : 35 Me : 33 Lo : 31 54
Heating
Silent mode sound pressure level — 49
Exterior dimensions (Height × Width × Depth) mm Unit 246 × 840 × 840
Panel 35 × 950 × 950 640×800(+71)×290
Exterior appearance
( Munsell color )
Plaster White
(6.8Y8.9/0.2 )near equivalent
Stucco White
(4.2Y7.5/1.1)near equivalent
Net weight kg UNIT 24 PANEL 5.5 45
Compressor type & Q'ty — RMT5113MDE2 ( Twin Rotary type )×1
Compressor motor (Starting method) kW — Direct line start
Refrigerant oil (Amount, type) — 0.45 MA68
Refrigerant (Type, amount, pre-charge length) kg R410A 1.6kg in outdoor unit (incl. the amount for the piping of : 15m)
Heat exchanger Louver fin & inner grooved tubing M shape fin & inner grooved tubing
Refrigerant control Capillary tubes + Electronic expansion valve
Fan type & Q'ty Turbo fan ×1 Propeller fan ×1
Fan motor (Starting method) W 50 < Direct line start > 34 < Direct line start >
Air flow Cooling
m
3
/min P-Hi : 28 Hi : 21 Me : 19 Lo : 17 36
Heating
Available external static pressure Pa 0 —
Outside air intake Possible —
Air filter, Quality / Quantity Pocket plastic net ×1(Washable) —
Shock & vibration absorber Rubber sleeve(for fan motor) Rubber sleeve (for Compressor)
Electric heater W — —
Operation
control
Remote control (option) wired : RC-EX1A , RC-E5 , RCH-E3 wireless : RCN-T-36W-E
Room temperature control Thermostat by electronics
Operation display —
Safety equipments
Compressor overheat protection, Overcurrent protection,
Frost protection, Serial signal error protection, Indoor fan motor error protection,
Heating overload protection( High pressure control ), Cooling overload protection
Installation
data
Refrigerant piping size ( O.D. ) mm Liquid line: I/Uφ9.52 (3/8") Pipeφ6.35(1/4")×0.8 O/Uφ6.35 (1/4")
Gas line: I/Uφ15.88 (5/8") Pipeφ12.7(1/2")×0.8 O/Uφ12.7 (1/2")
Connecting method Flare piping Flare piping
Attached length of piping m — —
Insulation for piping Necessary (both Liquid & Gas lines)
Refrigerant line (one way) length m Max.30m
Vertical height diff. between O.U. and I.U. m Max.20m (Outdoor unit is higher) Max.20m (Outdoor unit is lower)
Drain hose Hose Connectable VP25 (O.D.32) Holes size φ20 × 5pcs
Drain pump, max lift height mm Built-in Drain pump , 700 —
Recommended breaker size A —
L.R.A. (Locked rotor ampere) A 5.0
Interconnecting wires Size × Core number 1.5㎟×4 cores (including earth cable) / Termainal block (Screw fixing type)
IP number IPX0 IPX4
Standard accessories Mounting kit, Drain hose Drain elbow, Drain hole grommet
Option parts —
Note (1) The data are measured at the following conditions. The pipe length is 7.5m.
(2) This air-conditioner is manufactured and tested in conformity with the ISO.
(3) Sound level indicates the value in an anechoic chamber. During operation these value are somewhat higher due to ambient
conditions.
(4) Select the breaker size according to the own national standard.
(5) When wireless remote control is used, fan is 3 speed setting (Hi-Me-Lo) only.
(6) The operation data indicates when the air-conditioner is operated at 230V 50Hz or 220V 60Hz.
Item
Operation
Indoor air temperature Outdoor air temperature Standards
DB WB DB WB
Cooling 27˚C 19˚C 35˚C 24˚C ISO5151-T1
Heating 20˚C —7˚C 6˚C
B
PJF000Z314

-
12
-
'13 • PAC-DB-194
Model FDT90VNPVF1
Model
Item
FDT90VNPVF1
Indoor unit FDT100VF1 Outdoor unit FDC90VNP
Power source Single phase 220-240V 50Hz / 220V 60Hz
Operation
data
Nominal cooling capacity (range) kW 9.0 [ 1.9(Min.)
~ 9.0(Max.)]
Nominal heating capacity (range) kW 9.0 [ 1.5(Min.)
~ 9.0(Max.)]
Power Cooling
kW
2.67
consumption Heating 2.19
Max power consumption 4.19
Running Cooling
A
11.9 / 12.4
current Heating 9.9 / 10.3
Inrush current, max current 5, 18.0
Power factor Cooling %97 / 97
Heating 96 / 96
EER Cooling 3.37
COP Heating 4.11
Sound power level Cooling
dB(A)
65 69
Heating
Sound pressure level Cooling P-Hi : 51 Hi : 40 Me : 37 Lo : 35 57
Heating 55
Silent mode sound pressure level — Cooling:52 / Heating:50
Exterior dimensions (Height × Width × Depth) mm Unit 298 × 840 × 840
Panel 35 × 950 × 950 750 x 880(+88) x 340
Exterior appearance
( Munsell color )
Plaster White
( 6.8Y8.9/0.2 )near equivalent
Stucco White
( 4.2Y7.5/1.1 )near equivalent
Net weight kg UNIT 27 PANEL 5.5 57
Compressor type & Q'ty — RMT5118MDE2 ( Twin Rotary type )×1
Compressor motor (Starting method) kW — Direct line start
Refrigerant oil (Amount, type) — 0.675 MA68
Refrigerant (Type, amount, pre-charge length) kg R410A 2.1kg in outdoor unit (incl. the amount for the piping of : 15m)
Heat exchanger Louver fin & inner grooved tubing M shape fin & inner grooved tubing
Refrigerant control Capillary tubes + Electronic expansion valve
Fan type & Q'ty Turbo fan ×1 Propeller fan ×1
Fan motor (Starting method) W 140 < Direct line start > 86 < Direct line start >
Air flow Cooling
m
3
/min P-Hi : 37 Hi : 27 Me : 24 Lo : 20 63
Heating 49.5
Available external static pressure Pa 0 0
Outside air intake Possible —
Air filter, Quality / Quantity Pocket plastic net ×1(Washable) —
Shock & vibration absorber Rubber sleeve(for fan motor) Rubber sleeve (for fan motor & compressor)
Electric heater W — —
Operation
control
Remote control (option) wired : RC-EX1A , RC-E5 , RCH-E3 wireless : RCN-T-36W-E
Room temperature control Thermostat by electronics
Operation display —
Safety equipments
Compressor overheat protection, Overcurrent protection,
Frost protection, Serial signal error protection, Indoor fan motor error protection,
Heating overload protection( High pressure control ), Cooling overload protection
Installation
data
Refrigerant piping size ( O.D. ) mm Liquid line: I/Uφ9.52 (3/8") Pipeφ6.35(1/4")x0.8 O/Uφ6.35 (1/4")
Gas line: I/Uφ15.88 (5/8") Pipeφ15.88(5/8")x1.0 O/Uφ15.88 (5/8")
Connecting method Flare piping Flare piping
Attached length of piping m — —
Insulation for piping Necessary (both Liquid & Gas lines)
Refrigerant line (one way) length m Max.30m
Vertical height diff. between O.U. and I.U. m Max.20m (Outdoor unit is higher) Max.20m (Outdoor unit is lower)
Drain hose Hose Connectable VP25(O.D.32) Holes size φ20 x 5pcs
Drain pump, max lift height mm Built-in Drain pump , 700 —
Recommended breaker size A —
L.R.A. (Locked rotor ampere) A 5.0
Interconnecting wires Size × Core number 1.5㎟×4 cores (including earth cable) / Termainal block (Screw fixing type)
IP number IPX0 IPX4
Standard accessories Mounting kit, Drain hose Drain elbow, Drain hole grommet
Option parts —
Note (1) The data are measured at the following conditions. The pipe length is 7.5m.
(2) This air-conditioner is manufactured and tested in conformity with the ISO.
(3) Sound level indicates the value in an anechoic chamber. During operation these value are somewhat higher due to ambient
conditions.
(4) Select the breaker size according to the own national standard.
(5) When wireless remote control is used, fan is 3 speed setting (Hi-Me-Lo) only.
(6) The operation data indicates when the air-conditioner is operated at 230V 50Hz or 220V 60Hz.
Item
Operation
Indoor air temperature Outdoor air temperature Standards
DB WB DB WB
Cooling 27˚C 19˚C 35˚C 24˚C ISO5151-T1
Heating 20˚C —7˚C 6˚C
B
PJF000Z314

-
12-1
-
'13 • PAC-DB-194
Model FDT90VNPVF2
Model
Item
FDT90VNPVF2
Indoor unit FDT100VF2 Outdoor unit FDC90VNP
Power source Single phase 220-240V 50Hz / 220V 60Hz
Operation
data
Nominal cooling capacity (range) kW 9.0 [ 1.9(Min.)
~ 9.0(Max.)]
Nominal heating capacity (range) kW 9.0 [ 1.5(Min.)
~ 9.0(Max.)]
Power Cooling
kW
2.67
consumption Heating 2.19
Max power consumption 4.19
Running Cooling
A
11.9 / 12.4
current Heating 9.9 / 10.3
Inrush current, max current 5, 18.0
Power factor Cooling %97 / 97
Heating 96 / 96
EER Cooling 3.37
COP Heating 4.11
Sound power level Cooling
dB(A)
65 69
Heating
Sound pressure level Cooling P-Hi : 51 Hi : 40 Me : 37 Lo : 35 57
Heating 55
Silent mode sound pressure level — Cooling:52 / Heating:50
Exterior dimensions (Height × Width × Depth) mm Unit 298 × 840 × 840
Panel 35 × 950 × 950 750 x 880(+88) x 340
Exterior appearance
( Munsell color )
Plaster White
( 6.8Y8.9/0.2 )near equivalent
Stucco White
( 4.2Y7.5/1.1 )near equivalent
Net weight kg UNIT 27 PANEL 5.5 57
Compressor type & Q'ty — RMT5118MDE2 ( Twin Rotary type )×1
Compressor motor (Starting method) kW — Direct line start
Refrigerant oil (Amount, type) — 0.675 MA68
Refrigerant (Type, amount, pre-charge length) kg R410A 2.1kg in outdoor unit (incl. the amount for the piping of : 15m)
Heat exchanger Louver fin & inner grooved tubing M shape fin & inner grooved tubing
Refrigerant control Capillary tubes + Electronic expansion valve
Fan type & Q'ty Turbo fan ×1 Propeller fan ×1
Fan motor (Starting method) W 140 < Direct line start > 86 < Direct line start >
Air flow Cooling
m
3
/min P-Hi : 37 Hi : 27 Me : 24 Lo : 20 63
Heating 49.5
Available external static pressure Pa 0 0
Outside air intake Possible —
Air filter, Quality / Quantity Pocket plastic net ×1(Washable) —
Shock & vibration absorber Rubber sleeve(for fan motor) Rubber sleeve (for fan motor & compressor)
Electric heater W — —
Operation
control
Remote control (option) wired : RC-EX1A , RC-E5 , RCH-E3 wireless : RCN-T-36W-E
Room temperature control Thermostat by electronics
Operation display —
Safety equipments
Compressor overheat protection, Overcurrent protection,
Frost protection, Serial signal error protection, Indoor fan motor error protection,
Heating overload protection( High pressure control ), Cooling overload protection
Installation
data
Refrigerant piping size ( O.D. ) mm Liquid line: I/Uφ9.52 (3/8") Pipeφ6.35(1/4")x0.8 O/Uφ6.35 (1/4")
Gas line: I/Uφ15.88 (5/8") Pipeφ15.88(5/8")x1.0 O/Uφ15.88 (5/8")
Connecting method Flare piping Flare piping
Attached length of piping m — —
Insulation for piping Necessary (both Liquid & Gas lines)
Refrigerant line (one way) length m Max.30m
Vertical height diff. between O.U. and I.U. m Max.20m (Outdoor unit is higher) Max.20m (Outdoor unit is lower)
Drain hose Hose Connectable VP25(O.D.32) Holes size φ20 x 5pcs
Drain pump, max lift height mm Built-in Drain pump , 700 —
Recommended breaker size A —
L.R.A. (Locked rotor ampere) A 5.0
Interconnecting wires Size × Core number 1.5㎟×4 cores (including earth cable) / Termainal block (Screw fixing type)
IP number IPX0 IPX4
Standard accessories Mounting kit, Drain hose Drain elbow, Drain hole grommet
Option parts —
Note (1) The data are measured at the following conditions. The pipe length is 7.5m.
(2) This air-conditioner is manufactured and tested in conformity with the ISO.
(3) Sound level indicates the value in an anechoic chamber. During operation these value are somewhat higher due to ambient
conditions.
(4) Select the breaker size according to the own national standard.
(5) When wireless remote control is used, fan is 3 speed setting (Hi-Me-Lo) only.
(6) The operation data indicates when the air-conditioner is operated at 230V 50Hz or 220V 60Hz.
Item
Operation
Indoor air temperature Outdoor air temperature Standards
DB WB DB WB
Cooling 27˚C 19˚C 35˚C 24˚C ISO5151-T1
Heating 20˚C —7˚C 6˚C
PJF000Z314 F
#

-
13
-
'13 • PAC-DB-194
(2) Ceiling suspended type (FDEN)
Model FDEN71VNPVF1
Model
Item
FDEN71VNPVF1
Indoor unit FDEN71VF1 Outdoor unit FDC71VNP
Power source Single phase 220-240V 50Hz / 220V 60Hz
Operation
data
Nominal cooling capacity (range) kW 7.1 [ 1.4(Min.) ～7.1(Max.)]
Nominal heating capacity (range) kW 7.1 [ 1.0(Min.) ～7.1(Max.)]
Power Cooling
kW
2.50
consumption Heating 1.96
Max power consumption 3.27
Running Cooling
A
11.1 / 11.6
current Heating 8.8 / 9.2
Inrush current, max current 5, 14.5
Power factor Cooling %98 / 98
Heating 97 / 97
EER Cooling 2.84
COP Heating 3.62
Sound power level Cooling
dB(A)
62 67
Heating
Sound pressure level Cooling P-Hi：50 Hi：41 Me：39 Lo：38 54
Heating
Silent mode sound pressure level — 49
Exterior dimensions (Height × Width × Depth) mm 210 × 1,320 × 690 640×800(+71)×290
Exterior appearance
( Munsell color )
Plaster White
(6.8Y8.9/0.2 ) near equivalent
Stucco White
(4.2Y7.5/1.1 ) near equivalent
Net weight kg 37 45
Compressor type & Q'ty — RMT5113MDE2 ( Twin Rotary type )×1
Compressor motor (Starting method) kW — Direct line start
Refrigerant oil (Amount, type) — 0.45 MA68
Refrigerant (Type, amount, pre-charge length) kg R410A 1.6kg in outdoor unit (incl. the amount for the piping of : 15m)
Heat exchanger Louver fin & inner grooved tubing M shape fin & inner grooved tubing
Refrigerant control Capillary tubes + Electronic expansion valve
Fan type & Q'ty Centrifugal fan ×4 Propeller fan ×1
Fan motor (Starting method) W 20 ×2 < Direct line start > 34 < Direct line start >
Air flow Cooling
m
3
/min P-Hi：20 Hi：16 Me：14 Lo：12 36
Heating
Available external static pressure Pa 0 －
Outside air intake Not possible －
Air filter, Quality / Quantity Pocket plastic net ×2(Washable) －
Shock & vibration absorber Rubber sleeve(for fan motor) Rubber sleeve(for Compressor)
Electric heater W 0 －
Operation
control
Remote control (option) wired : RC-EX1A , RC-E5 , RCH-E3 wireless : RCN-E1R
Room temperature control Thermostat by electronics
Operation display RUN: Green, TIMER: Yellow, CHECK: Yellow
Safety equipments
Compressor overheat protection, Overcurrent protection,
Frost protection, Serial signal error protection, Indoor fan motor error protection,
Heating overload protection( High pressure control ), Cooling overload protection
Installation
data
Refrigerant piping size ( O.D. ) mm Liquid line: I/U φ9.52 (3/8") Pipe φ6.35(1/4")×0.8 O/U φ6.35 (1/4")
Gas line: I/U φ15.88 (5/8") Pipe φ12.7(1/2")×0.8 O/U φ12.7 (1/2")
Connecting method Flare piping Flare piping
Attached length of piping m － －
Insulation for piping Necessary (both Liquid & Gas lines)
Refrigerant line (one way) length m Max.30m
Vertical height diff. between O.U. and I.U. m Max.20m(Outdoor unit is higher)Max.20m(Outdoor unit is lower)
Drain hose Hose Connectable with VP20(O.D.26) Holes size φ20 × 5pcs
Drain pump, max lift height mm － －
Recommended breaker size A －
L.R.A. (Locked rotor ampere) A 5.0
Interconnecting wires Size × Core number 1.5㎟×4 cores(including earth cable)/ Termainal block(Screw fixing type)
IP number IPX0 IPX4
Standard accessories Mounting kit, Drain hose Drain elbow, Drain hole grommet
Option parts －
Note (1) The data are measured at the following conditions. The pipe length is 7.5m.
(2) This air-conditioner is manufactured and tested in conformity with the ISO.
(3) Sound level indicates the value in an anechoic chamber. During operation these value are somewhat higher due to ambient
conditions.
(4) Select the breaker size according to the own national standard.
(5) When wireless remote control is used, fan is 3 speed setting (Hi-Me-Lo) only.
(6) The operation data indicates when the air-conditioner is operated at 230V 50Hz or 220V 60Hz.
Item
Operation
Indoor air temperature Outdoor air temperature Standards
DB WB DB WB
Cooling 27˚C 19˚C 35˚C 24˚C ISO5151-T1
Heating 20˚C —7˚C 6˚C
B
PFA003Z973

-
14
-
'13 • PAC-DB-194
Model FDEN90VNPVF1
Model
Item
FDEN90VNPVF1
Indoor unit FDEN100VF1 Outdoor unit FDC90VNP
Power source Single phase 220-240V 50Hz / 220V 60Hz
Operation
data
Nominal cooling capacity (range) kW 9.0 [ 1.9(Min.) ～9.0(Max.)]
Nominal heating capacity (range) kW 9.0 [ 1.5(Min.) ～9.0(Max.)]
Power Cooling
kW
2.75
consumption Heating 2.25
Max power consumption 4.19
Running Cooling
A
12.2 / 12.8
current Heating 10.1 / 10.6
Inrush current, max current 5, 18.0
Power factor Cooling %97 / 97
Heating 96 / 96
EER Cooling 3.27
COP Heating 4.00
Sound power level Cooling
dB(A)
64 69
Heating
Sound pressure level Cooling P-Hi：46 Hi：44 Me：41 Lo：39 57
Heating 55
Silent mode sound pressure level －Cooling:52 / Heating:50
Exterior dimensions (Height × Width × Depth) mm 250 × 1,620 × 690 750 x 880(+88) x 340
Exterior appearance
( Munsell color )
Plaster White
(6.8Y8.9/0.2 ) near equivalent
Stucco White
(4.2Y7.5/1.1 ) near equivalent
Net weight kg 49 57
Compressor type & Q'ty －RMT5118MDE2 ( Twin Rotary type )×1
Compressor motor (Starting method) kW －Direct line start
Refrigerant oil (Amount, type) －0.675 MA68
Refrigerant (Type, amount, pre-charge length) kg R410A 2.1kg in outdoor unit (incl. the amount for the piping of : 15m)
Heat exchanger Louver fin & inner grooved tubing M shape fin & inner grooved tubing
Refrigerant control Capillary tubes + Electronic expansion valve
Fan type & Q'ty Centrifugal fan ×4 Propeller fan ×1
Fan motor (Starting method) W 30 ×2 < Direct line start > 86 < Direct line start >
Air flow Cooling
m
3
/min P-Hi：28 Hi：26 Me：23 Lo：21 63
Heating 49.5
Available external static pressure Pa 0 0
Outside air intake Not possible －
Air filter, Quality / Quantity Pocket plastic net ×2(Washable) －
Shock & vibration absorber Rubber sleeve(for fan motor) Rubber sleeve (for fan motor & compressor)
Electric heater W 0 －
Operation
control
Remote control (option) wired : RC-EX1A , RC-E5 , RCH-E3 wireless : RCN-E1R
Room temperature control Thermostat by electronics
Operation display RUN: Green, TIMER: Yellow, CHECK: Yellow
Safety equipments
Compressor overheat protection, Overcurrent protection,
Frost protection, Serial signal error protection, Indoor fan motor error protection,
Heating overload protection( High pressure control ), Cooling overload protection
Installation
data
Refrigerant piping size ( O.D. ) mm Liquid line: I/U φ9.52 (3/8") Pipe φ6.35(1/4")×0.8 O/U φ6.35 (1/4")
Gas line: I/U φ15.88 (5/8") Pipe φ15.88(5/8")×1.0 O/U φ15.88 (5/8")
Connecting method Flare piping Flare piping
Attached length of piping m － －
Insulation for piping Necessary (both Liquid & Gas lines)
Refrigerant line (one way) length m Max.30m
Vertical height diff. between O.U. and I.U. m Max.20m(Outdoor unit is higher)Max.20m(Outdoor unit is lower)
Drain hose Hose Connectable with VP20(O.D.26) Holes size φ20 x 3pcs
Drain pump, max lift height mm － －
Recommended breaker size A －
L.R.A. (Locked rotor ampere) A 5.0
Interconnecting wires Size × Core number 1.5㎟×4 cores(including earth cable)/ Termainal block(Screw fixing type)
IP number IPX0 IPX4
Standard accessories Mounting kit, Drain hose Drain elbow, Drain hole grommet
Option parts －
Note (1) The data are measured at the following conditions. The pipe length is 7.5m.
(2) This air-conditioner is manufactured and tested in conformity with the ISO.
(3) Sound level indicates the value in an anechoic chamber. During operation these value are somewhat higher due to ambient
conditions.
(4) Select the breaker size according to the own national standard.
(5) When wireless remote control is used, fan is 3 speed setting (Hi-Me-Lo) only.
(6) The operation data indicates when the air-conditioner is operated at 230V 50Hz or 220V 60Hz.
Item
Operation
Indoor air temperature Outdoor air temperature Standards
DB WB DB WB
Cooling 27˚C 19˚C 35˚C 24˚C ISO5151-T1
Heating 20˚C —7˚C 6˚C
B
PFA003Z973

-
15
-
'13 • PAC-DB-194
(3) Duct connected-High static pressure type (FDU)
Model FDU71VNPVF1
Model
Item
FDU71VNPVF1
Indoor unit FDU71VF1 Outdoor unit FDC71VNP
Power source Single phase 220-240V 50Hz / 220V 60Hz
Operation
data
Nominal cooling capacity (range) kW 7.1 [ 1.4(Min.) ～7.1(Max.)]
Nominal heating capacity (range) kW 7.1 [ 1.0(Min.) ～7.1(Max.)]
Power Cooling
kW
2.63
consumption Heating 1.96
Max power consumption 3.27
Running Cooling
A
11.7 / 12.2
current Heating 8.8 / 9.2
Inrush current, max current 5, 14.5
Power factor Cooling %98 / 98
Heating 97 / 97
EER Cooling 2.70
COP Heating 3.62
Sound power level Cooling
dB(A)
65 67
Heating
Sound pressure level Cooling P-Hi：38 Hi：33 Me：29 Lo：25 54
Heating
Silent mode sound pressure level — 49
Exterior dimensions (Height × Width × Depth) mm 280 × 950 × 635 640×800(+71)×290
Exterior appearance
( Munsell color ) －Stucco White
(4.2Y7.5/1.1 ) near equivalent
Net weight kg 34 45
Compressor type & Q'ty — RMT5113MDE2 ( Twin Rotary type )×1
Compressor motor (Starting method) kW — Direct line start
Refrigerant oil (Amount, type) — 0.45 MA68
Refrigerant (Type, amount, pre-charge length) kg R410A 1.6kg in outdoor unit (incl. the amount for the piping of : 15m)
Heat exchanger Louver fin & inner grooved tubing M shape fin & inner grooved tubing
Refrigerant control Capillary tubes + Electronic expansion valve
Fan type & Q'ty Centrifugal fan ×2 Propeller fan ×1
Fan motor (Starting method) W 130 < Direct line start > 34 < Direct line start >
Air flow Cooling
m
3
/min P-Hi：24 Hi：19 Me：15 Lo：10 36
Heating
Available external static pressure Pa Standard：35 Max：200 －
Outside air intake Possible －
Air filter, Quality / Quantity Procure locally －
Shock & vibration absorber Rubber sleeve(for fan motor) Rubber sleeve(for Compressor )
Electric heater W － －
Operation
control
Remote control (option) wired :RC-EX1A, RC-E5,RCH-E3 wireless : RCN-KIT3-E
Room temperature control Thermostat by electronics
Operation display －
Safety equipments
Compressor overheat protection, Overcurrent protection,
Frost protection, Serial signal error protection, Indoor fan motor error protection,
Heating overload protection( High pressure control ), Cooling overload protection
Installation
data
Refrigerant piping size ( O.D. ) mm Liquid line: I/U φ9.52 (3/8") Pipe φ6.35(1/4")×0.8 O/U φ6.35 (1/4")
Gas line: I/U φ15.88 (5/8") Pipe φ12.7(1/2")×0.8 O/U φ12.7 (1/2")
Connecting method Flare piping Flare piping
Attached length of piping m － －
Insulation for piping Necessary (both Liquid & Gas lines)
Refrigerant line (one way) length m Max.30m
Vertical height diff. between O.U. and I.U. m Max.20m (Outdoor unit is higher)Max.20m (Outdoor unit is lower)
Drain hose Hose Connectable VP25 ( I.D.25, O.D.32) Holes size φ20 × 5pcs
Drain pump, max lift height mm Built-in Drain pump,600 －
Recommended breaker size A －
L.R.A. (Locked rotor ampere) A 5.0
Interconnecting wires Size × Core number 1.5㎟×4 cores(including earth cable)/ Termainal block(Screw fixing type)
IP number IPX0 IPX4
Standard accessories Mounting kit, Drain hose Drain elbow, Drain hole grommet
Option parts －
Note (1) The data are measured at the following conditions. The pipe length is 7.5m.
(2) This air-conditioner is manufactured and tested in conformity with the ISO.
(3) Sound level indicates the value in an anechoic chamber. During operation these value are somewhat higher due to ambient conditions.
(4) Select the breaker size according to the own national standard.
(5) When wireless remote control is used, fan is 3 speed setting (Hi-Me-Lo) only.
(6) The operation data indicates when the air-conditioner is operated at 230V 50Hz or 220V 60Hz.
(7) The factory E.S.P. setting is set within the range of 80 - 150 Pa.If SW8-4 is turned to "ON", E.S.P. setting range can be changed to 10 -
200 Pa.(For RC-EX1A and RC-E5 only)
Item
Operation
Indoor air temperature Outdoor air temperature External static pressure
of indoor unit Standards DB WB DB WB
Cooling 27˚C 19˚C 35˚C 24˚C 35Pa ISO5151-T1
Heating 20˚C —7˚C 6˚C
B
PJG000Z160

-
16
-
'13 • PAC-DB-194
Model FDU90VNPVF1
Model
Item
FDU90VNPVF1
Indoor unit FDU100VF1 Outdoor unit FDC90VNP
Power source Single phase 220-240V 50Hz / 220V 60Hz
Operation
data
Nominal cooling capacity (range) kW 9.0 [ 1.9(Min.) ～9.0(Max.)]
Nominal heating capacity (range) kW 9.0 [ 1.5(Min.) ～9.0(Max.)]
Power Cooling
kW
2.65
consumption Heating 2.25
Max power consumption 4.19
Running Cooling
A
11.8 / 12.3
current Heating 10.1 / 10.6
Inrush current, max current 5, 18.0
Power factor Cooling %97 / 97
Heating 96 / 96
EER Cooling 3.40
COP Heating 4.00
Sound power level Cooling
dB(A)
65 69
Heating
Sound pressure level Cooling P-Hi：44 Hi：38 Me：36 Lo：30 57
Heating 55
Silent mode sound pressure level －Cooling:52 / Heating:50
Exterior dimensions (Height × Width × Depth) mm 280 × 1,370 × 740 750 × 880(+88) × 340
Exterior appearance
( Munsell color ) －Stucco White
(4.2Y7.5/1.1 )near equivalent
Net weight kg 54 57
Compressor type & Q'ty －RMT5118MDE2 ( Twin Rotary type )×1
Compressor motor (Starting method) kW －Direct line start
Refrigerant oil (Amount, type) －0.675 MA68
Refrigerant (Type, amount, pre-charge length) kg R410A 2.1kg in outdoor unit (incl. the amount for the piping of : 15m)
Heat exchanger Louver fin & inner grooved tubing M shape fin & inner grooved tubing
Refrigerant control Capillary tubes + Electronic expansion valve
Fan type & Q'ty Centrifugal fan ×3 Propeller fan ×1
Fan motor (Starting method) W 100 + 130 < Direct line start > 86 < Direct line start >
Air flow Cooling
m
3
/min P-Hi：36 Hi：28 Me：25 Lo：19 63
Heating 49.5
Available external static pressure Pa Standard：60 Max：200 0
Outside air intake Possible －
Air filter, Quality / Quantity Procure locally －
Shock & vibration absorber Rubber sleeve(for fan motor) Rubber sleeve (for fan motor & compressor)
Electric heater W － －
Operation
control
Remote control (option) wired :RC-EX1A, RC-E5,RCH-E3 wireless : RCN-KIT3-E
Room temperature control Thermostat by electronics
Operation display －
Safety equipments
Compressor overheat protection, Overcurrent protection,
Frost protection, Serial signal error protection, Indoor fan motor error protection,
Heating overload protection( High pressure control ), Cooling overload protection
Installation
data
Refrigerant piping size ( O.D. ) mm Liquid line: I/U φ9.52 (3/8") Pipe φ6.35(1/4")×0.8 O/U φ6.35 (1/4")
Gas line: I/U φ15.88 (5/8") Pipe φ15.88(5/8")×1.0 O/U φ15.88 (5/8")
Connecting method Flare piping Flare piping
Attached length of piping m － －
Insulation for piping Necessary (both Liquid & Gas lines)
Refrigerant line (one way) length m Max.30m
Vertical height diff. between O.U. and I.U. m Max.20m (Outdoor unit is higher) Max.20m (Outdoor unit is lower)
Drain hose Hose Connectable VP25(I.D.25, O.D.32) Holes size φ20 × 3pcs
Drain pump, max lift height mm Built-in Drain pump,600 －
Recommended breaker size A －
L.R.A. (Locked rotor ampere) A 5.0
Interconnecting wires Size × Core number 1.5㎟×4 cores (including earth cable)/ Termainal block (Screw fixing type)
IP number IPX0 IPX4
Standard accessories Mounting kit, Drain hose Drain elbow, Drain hole grommet
Option parts －
Note (1) The data are measured at the following conditions. The pipe length is 7.5m.
(2) This air-conditioner is manufactured and tested in conformity with the ISO.
(3) Sound level indicates the value in an anechoic chamber. During operation these value are somewhat higher due to ambient conditions.
(4) Select the breaker size according to the own national standard.
(5) When wireless remote control is used, fan is 3 speed setting (Hi-Me-Lo) only.
(6) The operation data indicates when the air-conditioner is operated at 230V 50Hz or 220V 60Hz.
(7) The factory E.S.P. setting is set within the range of 80 - 150 Pa.If SW8-4 is turned to "ON", E.S.P. setting range can be changed to 10 -
200 Pa.(For RC-EX1A and RC-E5 only)
Item
Operation
Indoor air temperature Outdoor air temperature External static pressure
of indoor unit Standards DB WB DB WB
Cooling 27˚C 19˚C 35˚C 24˚C 60Pa ISO5151-T1
Heating 20˚C —7˚C 6˚C
B
PJG000Z160

-
16-1
-
'13 • PAC-DB-194
Model FDU90VNPVF2
Model
Item
FDU90VNPVF2
Indoor unit FDU100VF2Outdoor unit FDC90VNP
Power source Single phase 220-240V 50Hz / 220V 60Hz
Operation
data
Nominal cooling capacity (range) kW 9.0 [ 1.9(Min.) ～9.0(Max.)]
Nominal heating capacity (range) kW 9.0 [ 1.5(Min.) ～9.0(Max.)]
Power Cooling
kW
2.65
consumption Heating 2.25
Max power consumption 4.19
Running Cooling
A
11.8 / 12.3
current Heating 10.1 / 10.6
Inrush current, max current 5, 18.0
Power factor Cooling %97 / 97
Heating 96 / 96
EER Cooling 3.40
COP Heating 4.00
Sound power level Cooling
dB(A)
65 69
Heating
Sound pressure level Cooling P-Hi：44 Hi：38 Me：36 Lo：30 57
Heating 55
Silent mode sound pressure level －Cooling:52 / Heating:50
Exterior dimensions (Height × Width × Depth) mm 280 × 1,370 × 740 750 × 880(+88) × 340
Exterior appearance
( Munsell color ) －Stucco White
(4.2Y7.5/1.1 )near equivalent
Net weight kg 54 57
Compressor type & Q'ty －RMT5118MDE2 ( Twin Rotary type )×1
Compressor motor (Starting method) kW －Direct line start
Refrigerant oil (Amount, type) －0.675 MA68
Refrigerant (Type, amount, pre-charge length) kg R410A 2.1kg in outdoor unit (incl. the amount for the piping of : 15m)
Heat exchanger Louver fin & inner grooved tubing M shape fin & inner grooved tubing
Refrigerant control Capillary tubes + Electronic expansion valve
Fan type & Q'ty Centrifugal fan ×3 Propeller fan ×1
Fan motor (Starting method) W 100 + 130 < Direct line start > 86 < Direct line start >
Air flow Cooling
m
3
/min P-Hi：36 Hi：28 Me：25 Lo：19 63
Heating 49.5
Available external static pressure Pa Standard：60 Max：200 0
Outside air intake Possible －
Air filter, Quality / Quantity Procure locally －
Shock & vibration absorber Rubber sleeve(for fan motor) Rubber sleeve (for fan motor & compressor)
Electric heater W － －
Operation
control
Remote control (option) wired :RC-EX1A, RC-E5,RCH-E3 wireless : RCN-KIT3-E
Room temperature control Thermostat by electronics
Operation display －
Safety equipments
Compressor overheat protection, Overcurrent protection,
Frost protection, Serial signal error protection, Indoor fan motor error protection,
Heating overload protection( High pressure control ), Cooling overload protection
Installation
data
Refrigerant piping size ( O.D. ) mm Liquid line: I/U φ9.52 (3/8") Pipe φ6.35(1/4")×0.8 O/U φ6.35 (1/4")
Gas line: I/U φ15.88 (5/8") Pipe φ15.88(5/8")×1.0 O/U φ15.88 (5/8")
Connecting method Flare piping Flare piping
Attached length of piping m － －
Insulation for piping Necessary (both Liquid & Gas lines)
Refrigerant line (one way) length m Max.30m
Vertical height diff. between O.U. and I.U. m Max.20m (Outdoor unit is higher) Max.20m (Outdoor unit is lower)
Drain hose Hose Connectable VP25(I.D.25, O.D.32) Holes size φ20 × 3pcs
Drain pump, max lift height mm Built-in Drain pump,600 －
Recommended breaker size A －
L.R.A. (Locked rotor ampere) A 5.0
Interconnecting wires Size × Core number 1.5㎟×4 cores (including earth cable)/ Termainal block (Screw fixing type)
IP number IPX0 IPX4
Standard accessories Mounting kit, Drain hose Drain elbow, Drain hole grommet
Option parts －
Note (1) The data are measured at the following conditions. The pipe length is 7.5m.
(2) This air-conditioner is manufactured and tested in conformity with the ISO.
(3) Sound level indicates the value in an anechoic chamber. During operation these value are somewhat higher due to ambient conditions.
(4) Select the breaker size according to the own national standard.
(5) When wireless remote control is used, fan is 3 speed setting (Hi-Me-Lo) only.
(6) The operation data indicates when the air-conditioner is operated at 230V 50Hz or 220V 60Hz.
(7) The factory E.S.P. setting is set within the range of 80 - 150 Pa.If SW8-4 is turned to "ON", E.S.P. setting range can be changed to 10 -
200 Pa.(For RC-EX1A and RC-E5 only)
Item
Operation
Indoor air temperature Outdoor air temperature External static pressure
of indoor unit Standards DB WB DB WB
Cooling 27˚C 19˚C 35˚C 24˚C 60Pa ISO5151-T1
Heating 20˚C —7˚C 6˚C
PJG000Z160 G
#

-
17
-
'13 • PAC-DB-194
(4) Duct connected-Low / Middle static pressure type (FDUM)
Model FDUM71VNPVF1
Model
Item
FDUM71VNPVF1
Indoor unit FDUM71VF1 Outdoor unit FDC71VNP
Power source Single phase 220-240V 50Hz / 220V 60Hz
Operation
data
Nominal cooling capacity (range) kW 7.1 [ 1.4(Min.) ～7.1(Max.)]
Nominal heating capacity (range) kW 7.1 [ 1.0(Min.) ～7.1(Max.)]
Power Cooling
kW
2.63
consumption Heating 1.96
Max power consumption 3.27
Running Cooling
A
11.7 / 12.2
current Heating 8.8 / 9.2
Inrush current, max current 5, 14.5
Power factor Cooling %98 / 98
Heating 97 / 97
EER Cooling 2.70
COP Heating 3.62
Sound power level Cooling
dB(A)
65 67
Heating
Sound pressure level Cooling P-Hi：38 Hi：33 Me：29 Lo：25 54
Heating
Silent mode sound pressure level — 49
Exterior dimensions (Height × Width × Depth) mm 280 × 950 × 635 640×800(+71)×290
Exterior appearance
( Munsell color ) －Stucco White
(4.2Y7.5/1.1 )near equivalent
Net weight kg 34 45
Compressor type & Q'ty — RMT5113MDE2 ( Twin Rotary type )×1
Compressor motor (Starting method) kW — Direct line start
Refrigerant oil (Amount, type) — 0.45 MA68
Refrigerant (Type, amount, pre-charge length) kg R410A 1.6kg in outdoor unit (incl. the amount for the piping of : 15m)
Heat exchanger Louver fin & inner grooved tubing M shape fin & inner grooved tubing
Refrigerant control Capillary tubes + Electronic expansion valve
Fan type & Q'ty Centrifugal fan ×2 Propeller fan ×1
Fan motor (Starting method) W 130 < Direct line start > 34 < Direct line start >
Air flow Cooling
m
3
/min P-Hi：24 Hi：19 Me：15 Lo：10 36
Heating
Available external static pressure Pa Standard：35 Max：100 －
Outside air intake Possible －
Air filter, Quality / Quantity Procure locally －
Shock & vibration absorber Rubber sleeve(for fan motor) Rubber sleeve(for Compressor)
Electric heater W － －
Operation
control
Remote control (option) wired :RC-EX1A, RC-E5,RCH-E3 wireless : RCN-KIT3-E
Room temperature control Thermostat by electronics
Operation display －
Safety equipments
Compressor overheat protection, Overcurrent protection,
Frost protection, Serial signal error protection, Indoor fan motor error protection,
Heating overload protection( High pressure control ), Cooling overload protection
Installation
data
Refrigerant piping size ( O.D. ) mm Liquid line: I/U φ9.52 (3/8") Pipe φ6.35(1/4")×0.8 O/U φ6.35 (1/4")
Gas line: I/U φ15.88 (5/8") Pipe φ12.7(1/2")×0.8 O/U φ12.7 (1/2")
Connecting method Flare piping Flare piping
Attached length of piping m － －
Insulation for piping Necessary (both Liquid & Gas lines)
Refrigerant line (one way) length m Max.30m
Vertical height diff. between O.U. and I.U. m Max.20m (Outdoor unit is higher)Max.20m (Outdoor unit is lower)
Drain hose Hose Connectable VP25 ( I.D.25, O.D.32) Holes size φ20 x 5pcs
Drain pump, max lift height mm Built-in Drain pump,600 －
Recommended breaker size A －
L.R.A. (Locked rotor ampere) A 5.0
Interconnecting wires Size × Core number 1.5㎟×4 cores (including earth cable)/ Termainal block (Screw fixing type)
IP number IPX0 IPX4
Standard accessories Mounting kit, Drain hose Drain elbow, Drain hole grommet
Option parts UM-FL2EF
Note (1) The data are measured at the following conditions. The pipe length is 7.5m.
(2) This air-conditioner is manufactured and tested in conformity with the ISO.
(3) Sound level indicates the value in an anechoic chamber. During operation these value are somewhat higher due to ambient conditions.
(4) Select the breaker size according to the own national standard.
(5) When wireless remote control is used, fan is 3 speed setting (Hi-Me-Lo) only.
(6) The operation data indicates when the air-conditioner is operated at 230V 50Hz or 220V 60Hz.
(7) Static pressure of optional air filter "UM-FL2EF" is 5Pa initially.
(8)The external static pressure setting can be changed to 10-100Pa. (For RC-EX1A and RC-E5 only)
Item
Operation
Indoor air temperature Outdoor air temperature External static pressure
of indoor unit Standards DB WB DB WB
Cooling 27˚C 19˚C 35˚C 24˚C 35Pa ISO5151-T1
Heating 20˚C —7˚C 6˚C
B
PJG000Z159
#