mitty dairy TK1-PS User manual

Assembly Instructions
for the Melasty
Portable
Milking Machine
315 E. Banks St Glennville, GA 30427
Tel: [phone]
Model TK1-PS GE
This is how your machine needs
to look after you already
assembled all the parts together.
Your machine doesn’t need oil.
The vacuum pump is dry and works
with graphite pallets that you will
have to replace as needed. The vacu-
um pump needs to be serviced
(cleaned) once a month. It is
important to clean your machine
before using it. You can go to our
You Tube Channel “Mitty Supply”
and watch the video on how to clean
and disinfect your machine prior to
use.
Once your machine is cleaned and
ready, go to the manual “Operating
The Electric and Gasoline Motor
Milking Machine.”
Please visit and subscribe to our
YouTube Channel, Mitty Supply,
for more videos on our machines
and other topics.

4. Insert the metal arm with the milking
cluster onto the nozzle on the top right of
the machine. Screw the muffler into the
pump that is located behind the machine,
next to the motor.
1. Unpack the machine, removing all
plastic wrapping.
2. Screw the handle into the hole that
is located on the back of the milking
machine behind the motor.
3. Standing in front of the machine, insert
the pulsator on the nozzle on the top left of
the machine. Insert gauge into the black
rubber tube on top of the machine.
5. Use a little Vaseline and heat from a heat gun
or hair dryer for all of the hoses. Connect the air
hose from the from the nozzle on the frame of
the machine to one of the nozzles on the milking
lid on the bucket. Connect the milk stopper
underneath the milking lid on the same nozzle
as the air hose.
6. The pulsator has 2 nozzles,
connect the black pulsator hose
that has 2 hoses connected to each
other to the pulsator.
7. Connect the milk hose coming
from the milking cluster to the 2nd
nozzle of the lid.
Air Hose
Gauge
Pulsator
Muer
Metal Arm
Nozzle for the
air hose.
Milk Stopper