MJM 193 User manual

MJM International Corporation 1-800-270-6199 Fax: [phone]
www.mjminternational.com
REV. B Date: 02-02-09 Page 1 of 2
MJM INTERNATIONAL CORPORATION
ASSEMBLY INSTRUCTIONS FOR
RECLINING SHOWER CHAIRS 193, 194, 195, 196
4 CASTERS W/ LEGS STEMS
(2 BRAKE & 2 NON-BRAKE)
1 SLIDING FOOTREST SUPPORT
2 ARMREST
ELEVATED LEGREST/WITH CUSHION.
RECLINING BACKREST/LUMBAR SUPPORT
CUSHION/SLING SUPPORT.
PUSH PULL HANDLE
16 (SIXTEEN) ½’’ SCREWS.
4 (FOUR) 1’’ SCREWS.
PLACE 196 RECLINING SHOWER CHAIR ON A FLAT SURFACE UPSIDE
DOWN TO INSERT (4) CASTERS.
SECURE CASTERS USING ½’’ RETAINING SCREWS.
(USE PREDRILLED HOLES AS REFERENCE).
EXAMPLE - 196 COMPONENTS
IDENTIFY ALL COMPONENTS TO START ASSEMBLY
STEP 2
NOTE: A PHILLIPS SCREWDRIVER OR A CORDLESS
HAND DRILL IS REQUIRED TO TIGHTEN / SECURE
ALL SCREWS.
NOTE: PLEASE MATCH EACH COLOR-CODED DOT
ACCORDINGLY.
STEP 4
REMOVE (2) 1’’ RETAINING SCREWS FROM ELEVATED LEGREST
SUPPORT AND SEPARATE FROM PVC PIPE.
CENTER AND INSERT LEGREST SUPPORT INTO SWIVEL FITTINGS.
SECURE ELEVATED LEGREST SUPPORT USING 1’’ RETAINING
SCREWS.
(USE PREDRILLED HOLES AS REFERENCE).
STEP 3
PREMOVE ½’’ RETAINING SCREWS, (4) FROM 4-WAY FITTINGS TO
INSTALL SLIDING FOOTREST.
CENTER AND INSERT SLIDING FOOTREST.
SECURE SLIDING FOOTREST USING ½’’ RETAINING SCREWS.
(USE PREDRILLED HOLES AS REFERENCE).
196 RECLINING SHOWER CHAIR
FACILITATE SHOWERING & TOILETING
SHOWN WITH
OPTIONAL COMMODE PAIL

MJM International Corporation 1-800-270-6199 Fax: [phone]
www.mjminternational.com
NOTE: CASTERS, RECLINING BACKREST, ELEVATING LEGREST, SLIDING FOOTREST & PUSH PULL HANDLE MUST
BE CHECKED AND SECURED PRIOR TO USING SHOWER CHAIR.
WARNING NOT SECURING ALL THE ABOVE CAN CREATE A SERIOUS SAFETY HAZARD.
REV. B Date: 02-02-09 Page 2 of 2
MJM INTERNATIONAL CORPORATION
ASSEMBLY INSTRUCTIONS FOR
RECLINING SHOWER CHAIRS 193, 194, 195, 196
STEP 5
STEP 6
INSERT ARMREST INTO SEAT SECTION AND SECURE
USING ½’’ RETAINING SCREWS.
(USE PREDRILLED HOLES AS REFERENCE.
INSERT RECLINING BACKREST INTO SWIVEL FITTINGS AND
SECURE USING ½’’ RETAINING SCREWS.
(USE PREDRILLED HOLES AS REFERENCE).
STEP 7
INSERT PUSH PULL HANDLE INTO BACK SECTION AND SECURE
USING ½’’ RETAINING SCREWS.
(USE PREDRILLED HOLES AS REFERENCE).
PLACE CUSHION ON ELEVATED LEGREST SUPPORT AND SECURE
VELCRO STRAPS.
PLACE LUMBAR SUPPORT ON RECLINING BACKREST AND SECURE
WITH SNAPS.
PLACE SLING SUPPORT ON RECLINING BACKREST.
STEP 8
194 RECLINING SHOWER CHAIR