MJM 450-PED User manual

450-PED, CHILD AND ADULT PLATFORM WALKER
ASSEMBLY INSTRUCTIONS
STEP 1 –IMAGE REFERENCE
STEP 2 –ASSEMBLING CASTERS.
STEP 3 –ASSEMBLING TOP AND BOTTOM SECTION.
REMOVE FOUR 6 x 3/8’’ SCREWS FROM MIDDLE SECTION.
INSERT TOP SECTION INTO BOTTOM FRAME.
SECURE TOP SECTION USING THE FOUR 6 x 3/8’’ SCREWS.
REMOVE 8 x 1’’ SCREWS FROM REINFOCEMENT RINGS,
NOTE: PLEASE MATCH EACH COLOR –CODED DOTS ACCORDINGLY.
INSERT REINFORCEMENT RINGS INTO CASTER SECTION ON BOTTOM FRAME (ALIGN RING WITH
PREDRILLED HOLES).
INSERT CASTER LEG STEMS INTO BASE SECTION.
SECURE THE RING AND CASTERS WITH THE 8 x 1’’ RETAINING SCREWS.
MJM International Corporation 1-800-270-6199 Fax: [phone]
REV. B Date: 11-22-09 Page 1 of 2
WARNING!!!!!!! CASTERS, REMOVABLE VELCRO PADDED TRAY, TOP AND BOTTOM SECTIONS MUST BE CHECKED AND
SECURED PRIOR TO USING 450-PED, CHILD AND ADULT PLATFORM WALKER.
NOT SECURING ALL THE ABOVE PROPERLY CAN CREATE A SERIOUS SAFETY HAZSERIOUS SAFETY HAZARD.
IDENTIFY COMPONENTS TO START ASSEMBLY
PARTS INCLUDED
1 REMOVABLE VELCRO PADDED TRAY.
5 CASTERS WITH LEG STEMS (IN BROWN BOX)
(2 BRAKE & 3 NON-BRAKE).
1 BOTTOM SECTION.
1 TOP SECTION.
5 REINFORCEMENT RINGS.
4 –6 x 3/8’’ RETAINING SCREWS (ON FRAME).
10 –8 x 1’’ RETAINING SCREWS (IN BROWN BOX).
NOTE: A PHILLIPS SCREWDRIVER OR A CORDLESS HAND DRILL IS
REQUIRED TO TIGHTEN/SECURE ALL SCREWS.

450-ADULT PLATFORM WALKER COMPLETELY ASSEMBLED.
UNDO VELCRO ON PADDED TRAY.
SECURE VELCRO ON PADDED TRAY.
450-PED, CHILD AND ADULT PLATFORM WALKER
ASSEMBLY INSTRUCTIONS
STEP 4 –ASSEMBLING REMOVABLE VELCRO PADDED TRAY.
NOTE: CASTERS LEG STEMS, REMOVABLE VELCRO PADDED TABLE, TOP AND BOTTOM SECTION MUST BE CHECKED AND
PROPERLY SECURED PRIOR TO USING 450-PED, CHILD AND ADULT PLATFORM WALKER.
Thank you for purchasing MJM International products; we appreciate the opportunity to serve your needs. To view our entire
product lines please visit our website at www.mjminternational.com
MJM International Corporation 1-800-270-6199 Fax: [phone]
REV. B Date: 11-22-09 Page 1 of 2
STEP 5 –ADJUSTING HAND GRIPS.
REMOVE WIRE LOCKING PINS FROM FRAME TO ROTATE
HAND GRIPS AND TO ADJUSTWIDTH.
SECECURE USING WIRE LOCKIN PIN.
NOTE: TO ADJUST 450-PED, CHILD AND ADULT PLATFORM
WALKER PLEASE REMOVE THE FOUR CLAMP LOCKING
SYSTEMS AND ADJUST ACCORDINGLY.