MK Diamond Products MK-1280 User manual

www.mkdiamond.com
Caution: Read all safety and operating instructions
before using this equipment. This owners manual
MUST accompany the equipment at all times.
MK-1280 GAS SAW
BRICK/PAVER SAW
OWNER’S MANUAL &
PARTS LIST
Gas Honda Part # 166561
08.2017
Revision 108
Manual Part No. 168579

32
1
2
4
5
6
10
11
14
16
17
21
23
24
25
26
28
31
33
34
35
36
37
38
40
5
6
24
3
7 8
27
43
27
5 6 26
MK-1280 GAS SAW EXPLODED VIEW
FIGURE 1 - MK-1280 SAW - P/N 166561

33
MK-1280 GAS SAW EXPLODED VIEW
5
5
9
12
13
15
18
19
20
22
29
32
39
41
FIGURE 1 - MK-1280 PAVER SAW - P/N 166561

34
MK-1280 GAS SAW PARTS LIST
ITEM DESCRIPTION PART # QTY
1NUT, 3/8-16 HEX 101188 3
2NUT, HEX, 5/16 - 18 101196 4
3WRENCH, 3/4 BOX END 134056 1
4HOSE, WATER VINYL 3/8 X 1/2, 30’ 150845 1
5WASHER, 3/8 SAE FLAT 150923 13
6WASHER, 3/8 SPLIT LOCK 150925 11
7SCREW, THUMB 5/16-18 X 1 - 1/2 151155 1
8NUT, SQUARE 5/16-18 151156 1
9FITTING, 1/2 MNPT X 3/4 FNH 151322 1
10 WASHER, LOCK, SPLIT, 5/16 151747 4
11 WASHER, FLAT, SAE, 5/16 151754 8
12 WASHER, 1/4 SAE, FLAT 151915 4
13 SCREW, 3/8 - 16 X 3-3/4 HEX HD CAP 152504 1
14 SCREW, HEX HD CAP, 3/8 -16 X 1 152507 2
15 NUT, LOCK STEEL 1/2” NPT 152729 1
16 NUT, 3/8 -16 HEX CENTERLOCK 153522 4
17 SCREW, HEX, 3/8 -16 X 3/4 153527 1
18 FITTING, 1/2 MNPT X 3/8 BARB 153653 1
19 SCREW, 1/4 - 20 X 1/2 TRUSS HEAD 153880 7
20 NUT, HEX TW, 1/4 - 20 153941 4
21 SCREW, HEX, 5/16 - 18 X 2 - 1/4 153951 4
22 BOLT, HEX HEAD TAP, 3/8 - 16 X 3 155830 1
23 SCREW, 3/8 - 16 X 2 - 1/2 HEX HEAD CAP 156030 2
24 MOUNT, SHOCK MK-5000 156105 8
25 STAND OFF, SHOCK MOUNT 156560 4
26 SCREW, HEX HD CAP, 3/8 - 16 X 2 - 3/4 156774 3
27 WASHER, FENDER, 3/8 ID X 1-1/2 OD 158523 8
28 BELT GUARD, OUTER, ARBOR, COMP 160888 1
29 FITTING, 1/2 NPT COUPLER 164208 1
30 ASSY, WARN LBL, MASNRY ELEC GAS 166011-GAS 1
31 FRAME, MAIN MK-1280 166555 1
32 BACKSPLASH, MK-1280 166576 1
33 ASSY, TABLE, MK-1280 166577 1
34 ASSY, ENGINE, HONDA, MK-1280 166578 1
35 ASSY, ARBOR, MK-1280 166579 1
36 BELT, 16J420 166580 1
37 ASSY, BLADE GUARD, 16”, MK-1280 166581 1
38 GUARD, BELT, INNER 166585 1
39 GUIDE, TENSION 167750 1
40 BRACKET, BELT GUARD 167763 1
41 CAP, VACUUM 167777 1
42 OWNER’S MANUAL, MK-1280 168579 1
43 CASTING, SQUARING ARM-COMP 231276 1
FIGURE 1 - MK-1280 PAVER SAW - P/N 166561

35
MK-1280 GAS SAW PARTS LIST
ITEM DESCRIPTION PART # QTY
1WHEEL, CONVEYOR CART 133090 4
2SCREW, HEX HD, 1/4 - 20 X 3/4 152370 4
3NUT, HEX W/WSHR, 1/4 - 20 153941 4
4NUT, HEX, TW, 5/16 - 18 153942 4
5WOOD STRIP, TABLE INSERT 158283 1
6SCREW, DRYWL, FLAT HD, #6X1 159906 2
7CASTING, TABLE, MK-1280 165398 1
8BACKSTOP, TABLE 166584 1
FIGURE 2 - ASSY, TABLE - P/N 166577

36
MK-1280 GAS SAW EXPLODED VIEW & PARTS LIST
1
2
3
4
5
7
8
9
10
4
7
6
ITEM DESCRIPTION PART # QTY
1NUT, 3/8 - 16 HEX 101188 4
2KEY, SQUARE, 1/4 X 1-3/4 150796 1
3SCREW, 3/8 - 16 X 1-3/4 HEX HD 150920 4
4WASHER, 3/8 SAE FLAT 150923 8
5WASHER, 3/8 SPLIT LOCK 150925 4
6ENGINE, HONDA GX270 155396 1
7SCREW, SET, KNR CUP, 5/16 - 18 X 3/8 157083 2
8ASSY, OIL DRAIN, 10MM 157577-01 1
9PULLEY, 16J25 X 1.0 BORE 158470 1
10 PLATE, MOTOR MOUNT 166556 1
FIGURE 3 - ASSY, ENGINE, HONDA - P/N 166578

37
MK-1280 GAS SAW EXPLODED VIEW & PARTS LIST
ITEM DESCRIPTION PART # QTY
1KEY, 3/16 SQ X 1 - 1/8 150344 1
2BEARING, ARBOR HOUSING 154594 2
3CASTING, 2000/5000 ARBPR - COMP 154637 1
4SCREW, 5/16 - 18 X 3/8 SOCKET HEAD SET 157084 2
5PULLEY, 16J28 X .75 BORE 160362 1
6SCREW, 1/2 - 13 X 1-1/12 HEX HEAD, LEFT HAND 160818 1
7FLANGE, OUTER, MASONRY, 4” 161304 1
8FLANGE, INNER, MASONRY, 4” 161305 1
9SHAFT, BLADE 166586 1
FIGURE 4 - ASSY, ARBOR - P/N 166579

38
ITEM DESCRIPTION PART # QTY
1ELBOW, 1/4 MNPT STREET 154615 1
2FITTING, 1/4 MNPT X 3/8 BARB 154659 1
3SCREW, HEX HEAD 3/8 - 16 X 1 - 1/2 LG. 156656 2
4CASTING, BLADE GUARD, 16” - COMP 166558 1
5VALVE, BALL, 1/4”M TO 1/4”F 231248 1
FIGURE 5 - ASSY, 16” BLADE GUARD - P/N 166581
MK-1280 GAS SAW EXPLODED VIEW & PARTS LIST

39
NOTES

40
MK-1280 GAS SAW ORDERING & RETURN INSTRUCTIONS
ORDERING INFORMATION
RETURN MATERIALS POLICY
PACKAGING INSTRUCTIONS
• Remove the Cutting Head and Support Angle Assembly
• Dry the saw before shipping
• When packing, include the following: Saw, Diamond Blade, Blade Guard and Support Angle
Assembly and Adjustable Cutting Guide (Other Accessories are not required)
• Package the unit in its original container or one of comparable size (do not ship the unit partially
exposed)
• Ensure all parts are secured in the packaging to prevent moving
AUTHORIZED SERVICE CENTERS
For quicker repair time, you may contact MK Diamond Customer Service, toll free, at 800 421-5830
or 310 539-5221 for the Authorized Service Center closest too you or visit our web site at
www.mkdiamond.com. For technical questions, call – 800 474-5594.
You may order MK Diamond products through your local MK Diamond distributor or, you may order
direct from MK Diamond.
When ordering direct from MK Diamond, please have the following information ready before calling:
• The Model Number of the saw
• The Serial Number of the saw
• Where the saw was purchased and when
• The Part Number for the part(s) being ordered
• The Part Description for the part(s) being ordered
NOTE: Standard orders are $50.00 or more when ordering direct from MK Diamond. A $6.00 charge
will be added to orders having a net billing value under $50.00. A nominal handling fee of $5.00 may
apply to some orders.
All parts may be ordered by calling toll free to – 800 421-5830 or 310 539-5221 and asking for
Customer Service. For technical questions, call – 800 474-5594.
To expedite the service relative to the return of a product purchased through MK Diamond, please
observe the following:
NOTE: When returning all items, they must have been purchased within the previous twelve (12)
months.
• Have the Model Number of the saw
• Have the Serial Number of the saw
• Have the location of where the saw was purchased
• Have the date when the saw was purchased
• Contact Customer Service for approval to return the item(s)
• Obtain a Returned Goods Number (RGA) authorizing the return
• Follow the packaging instructions in the following section
• Ensure the RGA number is on the outside of the returned package
• Ensure your item(s) are prepaid to the destination
For returned items, call toll free to – 800 421-5830 or 310 539-5221 and ask for Customer Service.

41
MK-1280 GAS SAW WARRANTY
CONTACT:
Please contact MK Diamond Products, Inc. Customer Service Department with any questions you
might have regarding distributors, parts or service.
Telephone: [phone]
Fax: [phone]
E-mail: [email protected]
Customer Service Hours: Monday through Friday, 6AM-4PM PST
MK Diamond Products, Inc.
1315 Storm Parkway
Torrance, CA 90501
© COPYRIGHT 2017, MK DIAMOND PRODUCTS, INC. ALL RIGHTS RESERVED.
The MK Diamond logo is a registered trademark of MK Diamond Products, Inc. and may not be used,
reproduced, or altered without written permission. All other trademarks are the property of their re-
spective owners and used with permission.
MK Diamond may have patents, patent applications, trade marks, copyrights of other intellectual
property right covering this product in this document.
This manual MUST accompany the equipment at all times. This manual is considered a permanent
part of the equipment and should remain with the unit if resold.
The information and specications included in this publication were in effect at the time of approval for
printing.
MK DIAMOND PRODUCTS, INC. will guarantee every machine they build, to be free from defects in
material and workmanship for (1) one year from date of purchase. The obligation of MK DIAMOND
PRODUCTS, INC. under this warranty is limited to the repair or replacement of any parts which,
under normal use, prove to be defective in material or workmanship. The parts involved or the unit
in question should be returned to MK DIAMOND PRODUCTS, INC. or to a point designated by us,
transportation prepaid.
This warranty does not obligate us to bear the cost of labor or transportation charges in connection
with replacement or repair of defective parts. Likewise, it shall NOT apply to any unit which has been
subjected to misuse, neglect or accident. This warranty does NOT apply to any machine which has
been repaired or altered outside our factory.
This warranty does NOT obligate MK DIAMOND PRODUCTS, INC., with respect to items not of our
manufacture, such as engines, motors, hydraulics, etc., which are subject to their own guarantees and
warranties.
We shall in no event be liable for consequential damages or contingent liabilities arising out of failure
of any equipment or parts to operate properly.
MK DIAMOND PRODUCTS, INC. LIMITED WARRANTY

42
NOTES

43
NOTES

MK Diamond Products, Inc.
1315 Storm Parkway
Torrance, CA 90501
Toll-Free: [phone]
Phone: [phone]
Fax: [phone]
www.mkdiamond.com
MK-1280 GAS SAW SERIES
OWNERS MANUAL & PART LIST