MK Martin MK Series Programming manual

MK Martin Enterprise Inc.
3950 Stef er Rd Elmira, ON, Canada N3B 2Z3
Tel: [phone]
Toll Free: 1-855-664-2752
Fax: [phone]
E-mail: [email protected]
www.mkmartin.ca
Operator’s / Parts Manual
THIRD ANGLE PROJECTION
5
4
3
1
Folder
S:\Solidworks\Solidworks_Vern\Grade Leveler\32793.SLDASM
DWG. NO.
REV
Model
SCALE 1:32
SHEET 13 OF13
DATE DRAWN
MATERIAL
32793
July-05-11 2:27:54 PM
DESCRIPTION
MK 778 Grade Leveler Assy
S:\Solidworks\Solidworks_Vern\Grade Leveler\
Weight(lbs.)
0
Width Height Length
0 0 851.29 0
Blank Size Unit of Measure
ITEM ID.
32799
Config ID
32799
DIMENSIONS ARE IN INCHES
TOLERANCES NON SPECIFIED:
FRACTIONAL 1/64
BEND 1.0
TWO PLACE DECIMAL 0.01"
THREE PLACE DECIMAL 0.002"
Notes
DO NOT SCALE DRAWING
MK578; MK678; MK778; MK878
Series Grader Leveler
5
4
3
1
Folder
S:\Solidworks\Solidworks_Vern\Grade Leveler\
DWG. NO.
REV
SIZE
Model
SCALE 1:32
SHEET 11 OF13
DATE DRAWN
MATERIAL
32793
July-05-11 2:27:54 PM
DESCRIPTION
MK 778 Grade Leveler Assy
S:\Solidworks\Solidworks_Vern\Grade Leveler\
A
Weight(lbs.)
0
Width Height Length
0 0 730.69 0
Blank Size Unit of Measure
Grade Leveler
32793
Config
Rev:18-1

Table of Contents
• Warranty -----------------------------------------------------------------------------------------------
• Registration -------------------------------------------------------------------------------------------
• Safety ---------------------------------------------------------------------------------------------------
• Decal Location ----------------------------------------------------------------------------------------
• Operation ----------------------------------------------------------------------------------------------
• Maintenance ------------------------------------------------------------------------------------------
• Parts ----------------------------------------------------------------------------------------------------
• Bolt Torque --------------------------------------------------------------------------------------------
2
3
5-6
7
8
9
10-11
12

2
Warranty
Effective on products retailed on or after November 1, 2017
Two Year Limited Consumer Warranty
Five Year Limited Consumer Warranty on Gearboxes
90 Day Limited Commercial Warranty including Gearboxes
Commercial includes rental and industrial applications.
Warranty begins at the time of customer delivery and is activated upon warranty registration receipt
at MK Martin Enterprise Inc.
Warranty coverage is null and void unless the Warranty Registration form has been completed
in full and is on fi le at
MK Martin Enterprise Inc.
Keep your registration copy in a safe place, it is required as proof of warranty activation.
This new and unused product is warranted by MK Martin Enterprise Inc. to be free from defects in material and workmanship under
normal use and regular service as described in the owner’s manual, for a consumer period of 2 years and 5 years for gearboxes,
from the date of delivery, and commercial period of 90 days, including gearboxes, from the date of delivery. Warranty is limited to
the replacement of parts and / or repair of the product.
If issues develop within the warranty period with the product, contact the local dealer from which you purchased the unit. Only
MK
Martin
authorized dealers may make repairs to the product or affect the replacement of defective parts, unless otherwise approved
by
MK Martin . Repairs / replacement will be done at no charge within a reasonable time after the receipt of the product.
This warranty does not cover the following items:
1. Normal replacement of service items.
2. Normal maintenance or adjustments.
3. Machines or parts lost or damaged during shipment,
4. Accessory items / parts not supplied by
MK Martin
5. Damages resulting from:
 misuse, negligence, accident, theft or  re
 use of improper or insuf cient fuel,  uids or lubricants
 use of after market parts or accessories, unless approved by
MK Martin
 modi cations, alteration, tampering or improper repair
 any device or accessories installed other than by an authorized dealer.
6. Tires are covered by the manufacturer of the tire and the warranty period speci ed by that manufac-
turer. Please contact the tire manufacturer for warranty on these items.
MK Martin Enterprise Inc. shall not, in any event, be liable for any losses, damages or costs; to include pro ts, travel, transportation,
pick up, delivery, towing cost, tow vehicle, loss of use, whether special, incidental, consequential or otherwise, in any way. Unit or
parts are returned at the customer’s expense.
Include a copy of your completed Warranty Registration form with any claim as proof of warranty activation.
There are no warranties, expressed or implied, other than those speci ed herein. No agent, employee or other person has any
authority to vary any of the foregoing provisions.
Warranty coverage is null and void unless the Warranty Registration form has been completed in full and is on  le at MK Martin Enterprise Inc.
Warranty begins at the time of customer delivery and is activated upon Warranty Registration receipt at MK Martin Enterprise Inc.
3950 Stef er Rd.  Elmira  Ontario, Canada  N3B 2Z3  Email : [email protected]  Fax : [phone]  Tel : [phone]
230817

3
M K Martin Enterprise Inc
3950 Steffl er Rd
Elmira ON CA N3B 2Z3
---------------------------------------------------------------------------------------------------------------------
Purchaser’s warranty protection is valid only when this completed form or a copy of this form
is on fi le at M K Martin Enterprise Inc. By fi lling out this form the purchaser has acknowledged
delivery of equipment and owner’s / operator’s manual and has accepted the condition of the
equipment.
Date of delivery to purchaser -------------------------------------------------------
Type of Equipment -------------------------------------------------------------------
Model # ------------------------------- Serial # -------------------------------------
Retailer’s Signature Indicates
• Equipment was properly assembled as directed by manufacturer
• Equipment was tested for functionality and operates properly
• Purchaser was instructed in safe and proper operating procedures
• Warranty was explained to purchaser
• Purchaser was given the operators manual
Retailer
Signature ----------------------------------------------------------------
Company ---------------------------------------------------------------
Address ---------------------------------------------------------------
-------------------------------------------------------------
Purchaser’s signature indicates
• Acceptance of equipment fully assembled
• Received operator’s manual
• Clearly understands conditions of warranty
• Received instructions of safe and proper operation of equipment
Purchaser
Signature -----------------------------------------------------------
Company ---------------------------------------------------------
Mailing address -------------------------------------------------
City ------------------------------------------ Prov/State -------- Postal Code/Zip ---------------
Available phone number -----------------------------------------
Warranty is valid only when it has been received by manufacturer at address above

4
-------------------------------------------------------------------------------------------------------------------------
Postage
Stamp
M K Martin Enterprise Inc
3950 Steffl er Rd
Elmira ON CA N3B 2Z3
Fold Here
Please Cut and Return to M K Martin Enterprise Inc
Fold And Tape here Do not tape all edges or use staples
Warranty Registration

5
Safety
Take Note! This safety symbol is found throughout this manual to call your attention to instruc-
tions involving yourself and others working around the machine.
• Failure to follow these instructions can result in injury or death
This symbol means
-- Attention!
-- Become Alert!
-- Your Safety is involved!
Signal words are used in this manual.
Caution: Indicates a potentially hazardous situation that may result in injury.
Warning: Indicates a hazardous situation that could result in serious injury or death.
Danger: Indicates a hazardous situation that needs to be avoided. It is you the operator that
needs to be aware of these dangers.
If you have any questions not answered in this manual please contact your dealer or
M K Martin Enterprise Inc Tel: [phone]
3950 Stef er Rd 1-855-664-2752
Elmira On Ca N3B 2Z3 Fax: [phone]
e-mail [email protected]
www.mkmartin.ca

6
Safety -- It,s in your interest!
Safety Guidelines.
Safety of the operator is one of our main concerns, however it is up to you the operator
to practice caution.
To avoid personal injury, study the following precautions and insist that those working with you
follow them. The Grader Leveler is a very basic piece of equipment. Clear the area of people
and especially children, as your attention is concentrated on what the blade is doing rather than
the surrounding space.
Try to stay aware of your surroundings. When adjusting or replacing parts, do not place yourself
or other persons or any part of your body under a raised blade.
Do not use this machine while under the inuence of drugs or alcohol. Review the safety in-
structions annually. This equipment should not be operated by children: or those unfamiliar with
the operation of the Grader Leveler. Do not allow persons to operate this machine until they have
read this manual and/or were instructed by a qualied person.
Please be careful with the extra weight on the back of the tractor. It may be necessary
to add extra weights to the front of the tractor to keep it balanced properly.

7
Decal Location
1
2
3
5
4
3
1
Folder
S:\Solidworks\Solidworks_Vern\Grade Leveler\
DWG. NO.
REV
SIZE
Model
SCALE 1:32
SHEET 11 OF13
DATE DRAWN
MATERIAL
32793
July-05-11 2:27:54 PM
DESCRIPTION
MK 778 Grade Leveler Assy
S:\Solidworks\Solidworks_Vern\Grade Leveler\
A
Weight(lbs.)
0
Width Height Length
0 0 730.69 0
Blank Size Unit of Measure
Grade Leveler
32793
Config
Part #2
Before operating machine, care-
fully read the instruction manual
Part #1 Series decal x2
Part #3
MK logo made in canada

8
Operating
Operating the Grader Leveler
To attach the Grader Leveler to the tractor; back the tractor to the Grader Leveler that is on
level ground and fasten the lower 3ph link to the lower hitch mount. Lengthen or shorten the top
link until the link can be pinned on the top hitch mount. This will ensure that the blade will be
level with the ground and tractor when the blade is in working position. Adjust the top Link until
the Leveler is parallel with the media that you want to level. The machine should oat along the
media to be leveled.
When using a skid steer loader the cutting edge mount can be reversed.
Storing the blade
Park or store the blade on a rm surface, concrete or wood planks in a dry place. When storing
for an extended period, clean any dirt form the blade and coat any surfaces that have the paint
worn off from use with a light coat of oil or rust protection.

9
Maintenance
MK Grader Leveler
Care and Maintenance
• After 1st 5 hours check all nuts and bolts and re-tighten if required
• At 10 hours check all nuts and bolts and re-tighten if required.
• Repeat at 5 hour intervals until all bolts have seated and stay tight.
Storage of MK Grader Leveler
• Store MK Grader Leveler in a rm, dry area, and set on blocks if the area is not rm enough
to support the equipment without sinking in.
• Clean off all caked dirt and mud.
• When Storing for a long period and rusting may be a problem, coat the parts that the paint
has worn off with oil or a rust preventative. Wipe all excess oil off with a dry rag.
The Cutting Edge is reversible and after it shows considerable wear it can be reversed. Set the
Grader Leveler on some secure blocks before removing the bolts.
Note! Cutting Edge is heavy! Handle with care and use heavy gloves!

10
1
2
3
4
5 6
7
8
9
17
10
11
1213141516
18
19
20
21
22
23
24
5
4
3
1
Folder
S:\Solidworks\Solidworks_Vern\Grade Leveler\
DWG. NO.
REV
SIZE
Model
SCALE 1:32
SHEET 10 OF13
DATE DRAWN
MATERIAL
32793
July-05-11 2:27:54 PM
DESCRIPTION
MK 778 Grade Leveler Assy
S:\Solidworks\Solidworks_Vern\Grade Leveler\
A
Weight(lbs.)
0
Width Height Length
0 0 886.41 0
Blank Size Unit of Measure
Grade Leveler
32799
Config
M K Grader Leveler
Item # Part # Description Qty
152656 Lynch Pin 2
250370 Hitch Pin 2
350723 Hitch Mast 1
4OL Flange Head Bolt 1/4x1 c/w Flange Nut 2
552649 OP Manual Tube 1
650724 Top Brace 1
7OL Bolt 5/8x4 1/2 c/w lw, n 1
8OL Bolt 5/8x4 c/w lw, n 1
9OL Bolt 5/8x5 c/w lw, n 1
10 23786 Loader Plate 1
11 OL Bolt 1x4 4/2 c/w ln 2
12 OL Bolt 3/4x2 c/w ln 2
13 OL Flange Head Bolt 1/4x1 c/w Flange Nut 2
14 52649 OP Manual Tube 1
15 50521 Loader Plate Brace 2
16 OL Bolt 5/8x6 c/w ln 1

11
Item # Part # Description Qty
17 50510 Spacer 1
18 32861 Skid Shoe 2
19 OL 5/8 Locknut 8
20 54065 5/8 Nordlock Set 8
21 OL Bolt 5/8x2 #5 8
22 32866 5’ Cutting Edge Bracket 2
32872 6’ Cutting Edge Bracket 2
32800 7’ Cutting Edge Bracket 2
32876 8’ Cutting Edge Bracket 2
23 52787 5’ Cutting Edge 2
53089 6’ Cutting Edge 2
53090 7’ Cutting Edge 2
53918 8’ Cutting Edge 2
24 OL Plow Bolt 5/8x1 3/4 c/w n (5ft) 14
OL Plow Bolt 5/8x1 3/4 c/w n (6ft) 16
OL Plow Bolt 5/8x1 3/4 c/w n (7ft) 18
OL Plow Bolt 5/8x1 3/4 c/w n (8ft) 20
M K Grader Leveler

12
Bolt Torque
As used on this machine
•Bolt torque table shown below gives torque values for various bolts used.
•This chart is for non-lubricated threads.
•Replace with same strength bolt.
Torque Speci cations. Torque values are identi ed by their head markings.
Diameter SAE 2 SAE 5 SAE 8
“A”ft-lb N.m ft-lb N.m ft-lb N.m
1/4 6 (8) 8 (11) 12 (16)
5/16 11 (15) 17 (24) 25 (33)
3/8 20 (27) 31 (42) 44 (59)
7/16 32 (43) 49 (67) 70 (95)
1/2 49 (66) 76 (105) 105 (145)
5/8 97 (130) 150 (205) 210 (285)
3/4 144 (195) 265 (360) 375 (510)
7/8 165 (225) 430 (585) 605 (820)
1250 (340) 645 (875) 910 (1230)
1 1/8 355 (480) 795 (1080) 1290 (1750)
1 1/4 500 (680) 1120 (1520) 1820 (2460)
1 1/2 870 (1180) 1950 (2640) 3160 (4290)
Allen head cap screw are similar to
SAE 8 quality
These torques are for reference only. Not all these sizes and grades are necessarily used in this
machine. Bolts that are used as a pivot or hinge have to be used with a locknut, therefore only
tighten enough to secure the bolt and still allowing the part to rotate freely.
SAE 2 SAE 8SAE 5 A

MK Martin Enterprise Inc.
3950 Stef er Rd Elmira, ON, Canada N3B 2Z3
Tel: [phone]
Toll Free: 1-855-664-2752
Fax: [phone]
E-mail: [email protected]
www.mkmartin.ca