Mobilita M100-PURS User manual

www.mobilita.in
TollFree : 1800 121 8485
Deluxe Padded
Raised Toilet Seat
code : M100-PURS
www.mobilita.in
TollFree : 1800 121 8485

PRODUCT DESCRIPTION
Weight Capacity : 190Kg Height : 4” (10cm)
Lifetime Limited Warranty
Toilet seat raiser made of polyurethane foam – 100%
corrosion proof. Presents no pressure marks after
prolonged sitting on the toilet. Tool – free installation –
easy to attach to the toilet seat. Smooth surfaces allow
easy cleaning. Delivered in practical carrier.
Your Mobilita branded product is warrantied to be free
of defects in materials and workmanship for the lifetime
of the product for the original consumer purchaser.
This device was built to exacting standards and carefully
inspected prior to shipment. This Lifetime Limited
Warranty is an expression of our confidence in the
materials and workmanship of our products and our
assurance to the consumer of years of dependable
service.
This warranty does not cover device failure due to owner
misuse or negligence, or normal wear and tear. The
warranty does not extend to non-durable components,
such as rubber accessories, casters, and grips, which are
subject to normal wear and need periodic replacement.
If you have a question about your Mobilita device or this
warranty, please contact an authorized Mobilita dealer.
© 2017 Eternity Distribution Pvt. Ltd. All rights reserved
Mobilita is a trademark of
Eternity Distribution Pvt. Ltd.
Chennai, Tamil Nadu, India | Made in China for Mobilita
[email protected] | TollFree 1800 121 8485
PACKAGE CONTENT
Carrier
Instructions for use
Toilet seat raiser made of PU foam
Toilet seat raiser to increase the toilet bowl height.
Facilitates sitting down and getting up without assistance.
To be used in case of mobility impairment and when use
of conventional toilet bowls is impossible.
INDICATION
Please check the product for possible defects before use.
Do not use defective product and contact the
manufacturer. Make sure not to exceed the maximum
load of 190kg.
SAFETY INSTRUCTIONS
Place the toilet seat raiser carefully on the toilet seat. To
avoid shifting, the limit stop at the front should be in
contact with the inside of the toilet bowl. The toilet seat
raiser is simply placed on top of the toilet seat and does
not require any screwing on. Please ensure that the toilet
seat is not moved during use.
INSTALLATION
Clean the toilet seat raiser regularly with warm soapy
water or mild, non – aggressive cleaning or disinfection
agents. Do not use any abrasive / acidic cleaning or scour-
ing agents as they damage the material. We assume no
warranty in this case.
CLEANING