Mocka Dakota Entertainment Unit User manual

A C DB
bolt
x20
screw
x6
screw
x10
allen key
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
Hardware Supplied
Phillips screwdriver required
Dakota Entertainment Unit
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1

Dakota Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
2
12
Attach panel [5] and [10] to panel [9] and 2x panels [7] to panel [8]
and secure with 10x screws (B). Tighten with a screwdriver.
Attach panels [3] and [6] to panels [7] and [8] and secure with
4x bolts (A). Tighten with an Allen key (C).
9
8
10
B
5
7
7
B
A
C
6
7
7
3
8

Dakota Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
3
3 4
Attach panel [5], [10] and [9] to panels [2], [3] and [6] with
6x bolts (A). Tighten with an Allen key (C).
Attach 2x panels [4] to panels [2], [3] and [6] and secure with 6x bolts (A).
Tighten with an Allen key (C).
2
C
A
3
6
4
4
2
C
A
3
6
10
5
9

Dakota Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
4
65
Attach panels [2], [3] and [4] to panel [1] and secure with 6x screws
(D) and 4x bolts (A). Attach 1x safety strap (V) to the top of the back
side of the unit as shown using 1x washer (Z) and 1x screw (W).
Tighten with a screwdriver and an Allen key (C).
Once assembled lift furniture into place, do not drag. Use a drill to create
a small hole lining up with the top of the safety strap (V). Fasten to the
wall using 1x washer (Z), 1x wall anchor (X) and 1x wall screw (Y).
Ensure unit is balanced and steady before use. You’re done, enjoy!
1
X
Y
Z
X
Y
Z
V
4
4
2
3
D
Z
W
A
C
V
Z
W