Mocka Aspen User manual

Phillips & Flathead screwdrivers and hammer required
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
1
X
Z
Y
W
safety
strap
x1
screw
x1
long
screw
x1
wall
anchor
x1
washer
x1
mocka.co.nz | mocka.com.au
B
ACDEF
GH
12 mm
Hardware Supplied
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
WARNING: Any furniture that is not anchored to a wall has the potential
to tip over in certain circumstances, i.e. if a child attempts to climb up on
the furniture or in the event of an earthquake. Accordingly, we
recommend that all furniture is anchored to a wall. We supply a free
safety wall anchor with all furniture sold and we recommend these are
used to prevent your product tipping. The fixing device provided should
fit most wall types, but please note that different wall materials
may require different fixing devices from those supplied.
bolt
x12
locking
nut x 12
dowel
x8
small
screw x16
I
L + R
slide rail
x4
L + R
slide rail
x4
screw x 8
Aspen Bedside Table
40 mm
long
screw x 12
handle
x 2
30 mm
medium
JK
cover
x 8
wedge
x 4

Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
2
mocka.co.nz | mocka.com.au
Aspen Bedside Table
12
A
A
W
Y
1
A
A
A
Insert 4 x bolts (A) into panels [1]. Tighten with a screwdriver.
Attach 1 x wall strap (W) to panel [1] using 1x screw(Y).
E
EE
E
E
EEE
34
G
G
GG
G
G
Attach 2 x left slide rails (G) to panel [3] and secure with 4 x small screws (E).
Tighten with a screwdriver.
Attach 2 x right slide rails (G) to panel [4] and secure with 4 x small screws (E).

Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
3
mocka.co.nz | mocka.com.au
Aspen Bedside Table
34
D
D
D
D
2
5
5
5
5
Attach panel [2] to panel [5] and secure with 8 x long screws (D).
Tighten with a screwdriver.
D
D
D
D
2
C
C
C
C
3
4
Insert 4 x dowels (C) into panels [3] and [4]. Attach panels [3] and [4] to panel
[2] and secure with 4 x long screws (D). Tighten with a screwdriver.

Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
4
mocka.co.nz | mocka.com.au
Aspen Bedside Table
56
6
3
4
Slide panel [6] between the grooves on panels [3] and [4] to form the
back of the unit as shown.
Tighten with a screwdriver.
CC
CC
B
B
B
B
4
3
Insert 4 x dowels (C) into panels [3] and [4]. Attach panels [3] and [4] to panel
[1] and secure with 4 x locking nuts (B). Tighten with a screwdriver.
1

Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
5
mocka.co.nz | mocka.com.au
Aspen Bedside Table
78
Drawers (x2)
BB
B
B
A
AA
A
10
7
9
Tighten with a screwdriver.
Insert 8 x bolts (A) into panels [7]. Attach panels [9] and [10] to panels
[7] secure with 8 x locking nuts (B).
7
I
E
I
Attach 4 x slide rails (H) to panels [9] and [10] and secure with 8 x small
screws (E). Insert 2 x handle (I) into panels [7].
10
9
E
H
H
E
11
8
79
9
10
10
FF
F
F
Drawers (x2)
Attach panels [11] to panels [9] and [10] Secure with 8 x medium screws (F).
I
II
K
Cover locking nuts (B) with 8 x covers (K).
Slide panels [8] between the grooves on panels [9] and [10] to form the base
of the drawer as shown.

Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
6
mocka.co.nz | mocka.com.au
Aspen Bedside Table
910
Once assembled lift furniture into place, do not drag. Use a drill to create
a small hole lining up with the top of the safety strap (W). Fasten to wall
using wall anchor (X), washer (Z) and screw. Ensure the unit is balaced
and steady before use. You’re done, enjoy!
X
Z
x1
wall
screw
wall
anchor
wall
screw
Washer
Strap
J
J
J
J
J
Attach 4 x wedges (J) to panel [6].
Tighten with a screwdriver.
6