Mocka Tahoe Change Table User manual

A B C D E
FH I JG
Phillips & Flathead screwdrivers and hammer required
Hardware Supplied
dowel
x26
bolt
x42
locking
nut x42
small
screw x16
long
screw x12
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Tahoe Change Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
x14
long screw
1
X
Z
Y
W
safety
strap
x1
screw
x1
long
screw
x1
wall
anchor
x1
washer
x1
L + R
slide rail
x4
L + R
slide rail
x4
mocka.co.nz | mocka.com.au
2
WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
40
nut
x4
long
screw x4
K
cover
x12

2
12
Tahoe Change Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
A
Drawer x 2
5
5
5
1
A
A
A
A
Insert 12 x bolt (A) into panel [5] and [6].Tighten with a screwdriver.
Insert 4 x locking nut (B) into panels [1] .Attach 4 x bolt (A) into panel [1].
Attach 4 x dowel (C) to panel [1] and secure with [5].
Tighten with a screwdriver.
A
B
A
A
6
C
B
C
A
A
A
B
B
CC

3
34
Tahoe Change Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
6
6
9
9C
C
CC
B
B
B
B
Insert 4 x locking nut (B) into panels [9] . Attach 4 x dowel (C) to panel [6] and
secure with [9].
69
1
DDDDD
Insert 6 x long screw (D) into panel [1] and [6] and [9]. Tighten with a screwdriver.
K
K
KK
Cover locking nuts (B) with 4 x covers (K).
D

4
56
Tahoe Change Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
C
C
10
11
G
G
A
AA
A
GG
EEEE
Attach 1 x left slide rail (G) to panel [3] and secure with 2 x small screw (E).
Tighten with a screwdriver.
Attach 1 x right slide rail (G) to panel [4] and secure with 2 x small screw (E).
Insert 4 x bolt (A) into panel [3] and [4].
34
A
A
B
B
K
K
Insert 2 x bolt (A) into panel [11].
Insert 2 x locking nut (B) into panels [10] . Attach 2 x dowel (C) to panel [10] and
secure with [11]. Cover locking nuts (B) with 2 x
covers (K).

5
78
Tahoe Change Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
Attach 6 x dowel (C) to panel [3] and [4]. Insert 6 x locking nut (B) into
Tighten with a screwdriver.
panel [11] and [12] .
B
C
C
B
B
B
B
C
C
B
3
4
11
12
A
A
AAA
A
A
2
Insert 6 x bolt (A) into panel [2] . Tighten with a screwdriver.

6
910
Tahoe Change Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
3
4
11
Y
2
W
C
C
C
C
B
B
B
B
BB13
Tighten with a screwdriver.
Insert 4 x dowel (C) into panel [2]. Attach panels [3] to panel [4] and[13].[3],[4]
and [13]and secure with 6 x . Attach 1 x wall strap (W) to panel
[13] using 1x screw(Y).
locking nuts (B)
J
J
I
I
II
I
I
8
8
7
7
I
with 4 x long bolts (J). Tighten with a screwdriver.
Insert 4 x nuts (I) into panel [8] . Attach panel [7] to panel [8] and secure

7
11 12
Tahoe Change Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
3
4
D
8
2
8D
D
D
D
DD
D
Tighten with a screwdriver.
Attach panels [7] and [8] to panel [2] and secure with 8 x long screws(D).
3
4
13
14
15
G
G
E
E
E
Attach 1 x left slide rail (G) to panel [3] and secure with 2 x small screw (E).
Attach 1 x right slide rail (G) to panel [4] and secure with 2 x small screw (E).
Slide panel [14] and [15] between the grooves on panels [3],[4] and [13] to
form the back of the unit as shown. Tighten with a screwdriver.

8
13 14
Tahoe Change Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
3
4
1
10
CC
CC
CCC
B
B
B
B
B
BB
B
Insert 6 x dowel (C) into panel [1]. Attach panel [1] to panels [3] and [4],[10] and[13]
and secure with 8 x locking nuts (B).
13
Drawer x 2
16
16
17
18
20
19
19
B
AA
AA
BB
B
B
A
A
Tighten with a screwdriver.
Insert 12 x bolts (A) into panel [16] . Slide panels [20] between the grooves
on panels [17] and [18] to form thebase of the drawer as shown. Attach panel
[17] and [18] and [19] to panel [16] and secure with 12 x locking nut (B).
17
18
KK
K
KK
K
Cover locking nuts (B) with 6 x covers (K).
Tighten with a screwdriver.

9
15 16
Tahoe Change Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
Drawer x 2
16
17
19
H
17
18
19
21
E
E
E
H
18
Attach panel [21] to panels [17] and [18] and [19] secure with 12 x medium
screws(F).
Tighten with a screwdriver.
Attach 4 x slide rails (H) to panels [17] and [18] and secure with 8
x small screw(E).
W
X
Z
Move the unit into the desired location up against a wall. Use a drill to
create a small hole lining up with the top of the 1x safety strap (W).
Fasten to the wall using 1x wall anchor (X), 1x washer (Z) and 1x long
screw. Ensure the unit is balanced and steady before use. You’re done,
enjoy!
F
F
FF
F
F
E
E
H
18